Hourleey Sewer Jetter Kit for Pressure Washer 50FT, Drain Cleaner Hose 1/4 Inch NPT, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle Spanner Tape Pearl Corsage Pin, 4000 PSI

I live in New England, and our gutters empty into ankle-high cast iron pipes that run underground (I think either to a french drain or the sewer system). Those pipes have been clogged with dirt and debris since we got the house, and with all the torrential rain recently, they fully backed up causing some moisture issues in our basement. I came across "jetting" as a solution instead of traditional snaking — glad I did. Some products I found, the hose alone cost $60. The "Clog Hog" seems nice, but goes for $180ish. So after shopping a spectrum of products, I was skeptical about this $40 dollar kit that came with everything needed, but it turned out great! Installing the fittings onto the hose was a breeze since it came with 2 wrenches and teflon tape. I put the quick attach on one end so I could pair this with my power washer's gun. I used one jet head for 3 of the pipes, all of which cleared within 5 minutes of work. Note — you want to work the hose up and down as it's pulling itself into the pipe, that seems to help clear out debris. Each time, the water would be filling up the pipe, and then suddenly I'd see it all drain as the jet cleared the obstruction. Very satisfying and relieving to have it work. I ended up using all of the tips on the 4th and most difficult drain which took me probably 40 minutes. There was definitely a major obstruction, as the water wasn't draining AT ALL to begin. The first head helped it start to drain a little. When I got stuck, switching the heads out seemed to help — I think partially because of their different features, and also because backing the hose all the way out cleared the pipe and let the water drain. Each time I put on a different head, it seemed to work down the pipe a little further. The spinning jet head was neat as it makes a loud whizzing noise and I could kind of hear where it was under the sidewalk. It actually brought up some roots from about 10 feet in when I pulled it up. In the end I cleared all the pipes, and even used it to clean out the downspouts from the gutter which had gotten dirt and leaves stuck in the elbows. I'll also say, some other hoses I saw seemed to have a stiff collar covering several inches of either end of the hose. I read that these make it impossible to bend around tight corners, which I knew these cast iron pipes had. This hose was pretty much flexible right after the metal ends and worked perfect for me.

This thing is the cats meow for removing clogged pipes ,it cleaned out a 5 inch corrugated drain pipe in minutes, I highly recommend this product. Worth every penny!!!

Worked Great. Cleared a line completely blocked with grease

I ordered this because it would arrive the next day and fortunately it worked as advertised. I did not give 5 stars because of the lack of instructions in the box. The parts are easy enough to figure out but I still don't know what the sewing pins are for and the difference is between the 3 nearly identical spray nozzles. They are numbered 4.0, 4.5, and 5.0 but are otherwise the same in appearance. It easily connected to my pressure washer and it was simple to drop the nozzle down into my sewer clean-out / check valve and guide it up the pipe. Once the water pressure was applied it moved itself along the pipe with some minor difficulty. I had to move it back and forth a few times and untwist the coils in the hose to get it to feed smoothly. It eventually reached the clog and broke it up quickly. This tool saved a few hundred dollars in a plumbing service call. My sewer line has been scoped several times in the last 3 years and is in good condition. I suspect the jet will not be effective on lines that are compromised. It is relatively cheap and effective if your problem is just a line clog.

I had a clog in the main sewer line that I could hit with a snake, but not break loose. I started looking into these and bought this one because a lot of the others are made from thermoplastic and polyester. This one has an actual pvc coating over the thermoplastic. After reading reviews, the others seemed to have a higher risk of bursting or being too soft to push into the pipe. Some others are made with a steel braid, but that seemed like overkill for household use and pricing. I think this hose is a good middle ground. It was stiff enough to go 35' into my pipe without binding, folding or kinking and broke loose the blockage. I also noticed some others are bulky around the fitting area and some even have an extra rubber covering over the area where the connector is crimped to the hose making it really bulky. This hose has a nice slim design in that area. It worked amazingly and I am thankful I did not have to call a professional! If you have never done anything like this before, it is possible, you can do it, but you will never want to again! I had the foresight to assume there would be pressure in the line, so I made sure to stay to the side when I loosened the cap to access the pipe. I loosened it about 1/2 way and let the water drain out because if I had taken it all the way off, it would have gushed very violently. My pipe has a weird S going into the ground and I wanted to have a straight shot going into it so I used a taper drill bit and drilled a hole in the top of the pipe and ran the hose in. It did not snag on the S at all. My hubby operated the pressure washer from outside the house. You can push the hose in without water flow, but having that water flow makes it much easier, so I recommend having a buddy system for this. The way the backwash nozzle worked was awesome. It flushed back the clog as it was breaking through and I pulled the hose partially out to help wash it out then ran it back in. When I could feel I had hit the soild part of the clog, I let it sit and eat at it for a bit then pulled the hose back about a foot and rammed it in again. I had to work at it this way for about 30 minutes. I was getting backwash out of the open cap the entire time. All of a sudden, it sounded like a toilet flushed and I was no longer getting backwash. I broke through! I pulled the hose almost all the way out and ran it back through 2 more times to really clean it. I put a rubber plug in the hole I drilled and wrapped it with duct tape to keep it in place and put the cap back on. We filled up the washer and bathtub then drained it all at the same time. Success! I recommend wearing a dust mask if you have to be under your house like I did. It obviously won't help with the smell, but it can be surprisingly dusty. Wear old clothes and shoes you don't care to throw away afterward. Wear rubber/nitrite gloves under your work gloves to keep your hands dry. Wear goggles or at least safety glasses. You DO NOT want anything that comes out of that pipe in your eyes. Maybe some knee pads for crawling around. And have a strong stomach so you don't throw up in your mask. I truly wish you the best if you have to do this yourself. Plumbers are expensive, and they deserve every penny of it for having to take on jobs like this everyday!

Works very good even with a smaller electric pressure washer. Would work very great with large gas pressure washers

I was really worried about getting one of these things after reading all the reviews. I'm so glad I went ahead and got it because it blasted through my clog in under 5 mins. That was on my second try with a better power washer. Btw, luckily I did not have roots in my drain pipes or this may not have worked at all (no matter what power washer I used). From all the research I did, and from my own experience now... it doesn't matter what PSI your power washer has, it's all about GALLONS PER MINUTE. You need around 2 or 2.5gpm at a minimum for these kinds of jetter nozzles/hoses to work properly. I first used a 1.5gpm power washer and got nowhere. Then I borrowed my neighbors 2.5gpm power washer and WOOSH, the clog was gone in 5mins flat. HUGE difference in the two power washers. Btw, both mine and my neighbors power washers had very similar PSI ratings, but his 1gpm better than mine and that made all the difference. Anyway, all my friends, relatives and neighbors now know who to call when they have any kind of clog. I've been raving about this to them and about all the money I saved. I am now looking forward to someone getting a clog, even me... lol... because I know it's a whole new ball game with this thing. Btw, I'm ex Navy, and I have been a house remodeler, property flipper, handy man, and rental owner off and on for about 4 decades. I also used to build new houses. Anyway, suffice to say, I have done my fair share of snaking out drains and repairing overflowing toilets at 3 in the morning. When I rave about something like this, you can take that to the bank. Now, is this brand an industrial-strength level one of these jetters? Not even close, those cost thousands - I know because I looked into them. Still, I love having this addition to my overall plumbing tool kit, and when it breaks i'll just get another one off Amazon. To me it looks like all the ones you can get online are pretty much being made for the homeowner slash consumer market and probably coming out of the same factory overseas. Still, I hope it holds up and I'll try to update if a hose coupler blows out or i start getting pin holes in the hose or some such cheap junk malady with this thing.

Great product, used it to unclog 2 inch pipe, it was easy to insert it and it cleaned all the grease and debris in there perfectly.

Práctico y funcional, se adapto perfecto al conector de la karcher qué tengo, bastante sencillo de manejar pues avanza casi en automático y potente para limpiar y el desasolve de la tubería de 4 pulgadas qué tenía llena de raíces, un problema es que por el largo de la boquilla no accedes y se atora en codos de 2 pulgadas. Importante es no empujar o forzar su avance y si llega a trabar retroceder un poco y permitir que avance a su ritmo.

So many pieces and all have great use.

جودته عالية وساعدني كثيراً

Good quality