3D Solutech Mint 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG) - 3DSPLA175MNT

Works fine. I print at 190 usually on my Ender 3.

This stuff is amazing. It makes me feel like an old 3D veteran. It is super forgiving, and makes almost everything I print look much better than it should.Sticks great to any surface, prints smooth and clean, and it is a great color, even though I bought it cause I thought it would be ugly (and it was on sale).Seriously, I have used a handful of filaments, by some more well known companies, and this is my favorite if I want it to look good. I bought a used printer and unboxed it, put it back together (it had a rough trip), and printed with another well known filament. No adjustments, no nothing, just tested to see if it was functional. It worked, but looked like crapola. For sh#ts and giggles I loaded up this filament. Not perfect, but if I had used this first I may have thought things were much better than they were (not sure if there was a tight screw to be had on old Nelly).Anyway, I have a few other rolls of 3DS filament to try, and have no doubt they will be great, since I have preached so much all the guys at work have used the same companies producrs, and all have been happy.Watch for a sale, buy a roll, and be prepared to be amazed.

I really like 3DSolutech's filament. I've mostly used white and haven't had any issues. I'm not sure if it's color related or just a bad roll, but this filament keeps breaking. I have to watch it closely because it's snapped mid print on a few occasions.

The media could not be loaded.  This filament arrived nicely packaged and in a vacuum sealed plastic bag with a desiccant pack. The first several wraps of filament were extremely brittle. So much so that I could not even get it to feed into the Bowden tube without breaking. I've used this exact filament in the past with no issues. This filament was just unpacked and has not been exposed to moisture.

Very nice layer-to-layer blending. It flows very well through my MMU without a single jam or break. Very satisfied with the performance of this filament. For a long time 3D Solutech has been my favorite filament brand. There was a period in mid 2020 where I got several rolls of brittle filament. This roll performs like the high quality filament that I have become accustomed to. Hopefully this is a sign of a return to the great filament that they've provided in the past.

This is a beautiful light blue perfect for ocean/sea-related prints. Bought it to print towel holders and other items for a bathroom. Vanity is sea salt, mosaic tile is called Dolphin Bay and filament matches it perfectly.So glad 3D Solutech's quality is back to normal!! Had to return a couple spools at the beginning of the Pandemic. Once again, my go to brand when looking for new colors.

Truly a "mint" color. Printed a few things and the bright color is still kept in the model. My only real complaint is that my filament became brittle in a matter of weeks. Previous rolls that I owned did not exhibit this issue.

Like the title says this is great filament so far after I figured out what Temp I needed to print at. I started at the low end of 195 and barely could get it to extrude. I had this issue until about 205c. At 205 it would not adhere to my build plate. At 215 for initial layer I was finally able to get the filament to adhere to the build plate and 210 for the rest of the layers with a heated bed set to 65c.Little stringy but nothing a lighter couldn't fix.

No es la primera vez que compro filamento de esta marca, anteriormente habría comprado negro y natural. Después de imprimir guardo el filamento en una caja de plástico con desecante para evitar la humedad. Si bien algunas veces he olvidado guardarlo,nunca tuve problemas con el natural y el negro. Este azul en los últimos 300gr el filamento se volvió sumamente quebradizo, se rompía mientras imprimía. Posiblemente sea por el color o el lote, tal vez este color es mas susceptible a la humedad :/ Me gusta el color, y para poder utilizar lo ultimo que queda, en lugar de colocar todo el rollo en la impresora, corto los metros aproximados que utilizare para imprimir y alimento a impresora con eso. De esta manera parece menos propenso a romperse.

Llevo rato comprando esta marca en amazon, pero este color en particular me ha salido muy malo. Digamos que 30% del producto salio bien y el resto demasiado quebradizo, lo intente usar con mi impresora de extrusion boden y con la de extrusion directa, ninguna pudo imprimir sin que el filamento se quebrara en muchos pedazos.Debo dar a notar que esto paso al dia siguiente que me llego y no me ha pasado con ningun otro filamento desde entonces.

El color está increíble, desafortunadamente resulta casi imposible imprimir ya que se rompe constante en tramos de 30 a 20cm de longitud.No pude imprimir ni una sola pieza sin estar junto a la impresora supervisando y volviendo a cargar el filamento.Pensé que era un problema con mi carrete pero hay muchos comentarios con el mismo problema, no pierdan el tiempo y eviten comprar este color, el resto de los colores de 3D Solutech funcionan excelente.

PLA (facil de imprimir) y 3Dsolutech (buena calidad) las impresiones nunca salen mal, el color menta es muy bonito y el acabado es excelente. No se batalla -nada- en obtener buen resultado y los settings son tal cual como los pide el fabricante. Nunca se falla con Solutech.

It’s a beautiful colour, however in the 12 hours I had it it’s broke off twice which being used.