GeilSpace 3/4" × 36" Heavy Duty Pre-Cut Grey Metal Pipe, Industrial Steel Fits Standard 3/4 Inch Threaded Pipes and Fittings - Vintage DIY Industrial Shelving (3/4" × 36", Grey)

Purchased for new Bessey wood clamps. Excellent quality, heavy duty great threads on both ends of pipe. I will be purchasing another set for sure.

I purchased this pipe for use as pipe clamps. With Bessey parallel clamps, I found I was often 1 or 2 inches too short, and the 3feet clamps with pipe clamps provide a throat of about six inches more than a Bessey clamp. Read on for my impressions after testing the clamps. -- OILED: The pipes are oiled to prevent rust, and a simple wipe with a cloth cleaned them up adequately for use as pipe clamps. -- NICE THREADS: The threads are nicely cut, very clean, with no burrs, even from shipping, and are not painted or anodized, just steel. -- FIT CLAMPS PERFECTLY: The 3/4 inch pipe threaded into the clamp perfectly and went deep into the clamp for a solid connection. See the attached picture. -- NO DEFLECTION: I applied the clamps on a piece of 30-inch long, 1-inch thick maple which was perfectly flat, and set the pipe on the board. When tightening the clamp to the maximum pressure that I could apply with both hands (much more than would ever be done in practice when gluing wood) and inspecting the gap between the flat board and the pipe, I saw no gap. The pipe remained perfectly straight. See the attached picture. -- Soft Steel: The black pipe, iron or steel, is fairly soft, and the pipe clamps will leave deep gouges. Over a long period of use, the gouges will build up, and the clamp may tend to catch on the gouges as one slides the pipe clamp up and down the pipe, which will be annoying but will not affect the functionality. -- GOOD PRICE: These clamps were about ¼ the cost of the same length clamp at the brick-and-mortar store.

Es lo que pedi pero esperaba 6 tubos y solo llegaron 5 me llegaron 5 y non puedo utilizarlo por que solo vienen 5 de 6

They are heavy duty, greasy with some kind of anti rust stuff. I used them for some wood working clamps. The treads were good, and threaded on very well. I’d recommend them.

I couldn’t be more impressed with these GeilSpace 3/4" × 36" metal pipes. They arrived perfectly wrapped in pairs, ensuring the protective coating stayed intact. A quick wipe down with a bit of acetone and steel wool, followed by a light coating of Boeshield T-9, and they were ready for action. I’m using them to create custom woodworking clamps, and the quality and durability are immediately apparent. The threading is precise and consistent, and the steel is straight and true - they are just what I needed for a heavy-duty project. Not only do these pipes offer a sturdy base for my clamps, but their industrial, vintage-inspired look also adds a cool aesthetic touch to my workshop. They fit standard 3/4" fittings perfectly, making assembly quick and hassle-free. After seeing their performance firsthand, I’m so confident in their quality and reliability that I just ordered four more in longer lengths. If you’re looking for high-quality, heavy-duty pipes that are both functional and visually appealing, you can’t go wrong with these. They’re a great investment for any DIY or professional project!