PURPLE LEAF Garden Swing Chair 2 Seater, Outdoor Swing Bench Bed Hammock With Adjustable Canopy, 2 Cup Holders, Weather Resistant Steel Frame, Cushions and Pillow for Proch and Patio, Navy Blue

Great swing. Looks lovely and is good sturdy quality.

The box in which it was delivered had evidently been opened before and was damaged. The fixings were not in their original packets. The product does not match the photograph shown as the canopy and the seat fixings are different. This makes the assembly instructions for the seat a complete nonsense. The canopy cannot be fully secured and tilts in the slightest wind.

Just over 4 weeks old and the rear leg has rust marks along 60% of its length!

Lovely sturdy seat, good value for money. As a 70 year old rubbish diy'er, I managed to put it together on my own in approx 2.5 hours.Only downside was the rubbish instructions and a couple of the tapes on the cushions came off after a couple of days.

OK quality at high price. Seat hight is a bit high as leaves legs dangling.

Lovely two seater patio swing. I am really enjoying the addition to my home and can relax when using this swing. Very comfortable, sturdy and was easy to assemble with the two of us.The holders are sturdy enough to hold 2-8oz glasses on each side and a cell phone. You need stretch out the legs underneath of the holders to attach to the bar to hold them up. The lumbar pillow is a nice plus and the cushions are good but can, down the road, be replaced with something thicker or more to your liking. But it does match beautifully. The overhead cover is easy to stretch on but I would suggest for winter weather and rain to buy an overall cover. If put in the right place you get great shading from the sun!I’m so glad I got this product and would buy it over again.The lighting that comes with it works great but you must remember on the back of the solar box to turn it ‘off or on’ and the lights do not work in the daytime of course. The Solar box for lights take a good 8 hours to charge once you install the batteries. But the lights are very colorful and you have two choice patterns on how they blink.The picture instructions were good enough to put the swing together if you look carefully. Remember to put on the covers for the bolts for a finishing touch. The hanging posts for the swing have two shorter ones and two longer ones. The longer ones go in the back. Other than that it’s good to go and simple.I would recommend this product but if you don’t have patience to put this patio swing together have someone else do it for you or at least help.Customer service was great and helpful. ♥️

Matériel conforme à la description. Très jolie balancelle et de bonne qualité mais il existe un problème avec la boulonnerie. Il manque des entretoises dans les tubes ce qui éviterai la détérioration rapide des tubes qui s’écrasent en serrant. Un des trapèzes métalliques (étagères) n’était pas de la même dimension (erreur de 4cm sur la longueur). Obligation de l’adapter avec des entretoises pour récupérer l’écartement au lieu de s’embêter à retourner l’ensemble du produit.Quand à la livraison, les deux personnes ont insisté pour mettre le colis de 43 kilos à l’intérieur de la maison, ils ont endommagé la moustiquaire de la fenêtre, ont probablement cassé une des lampes solaires dans l’allée (elle a tout simplement disparu) mais c’est un autre débat.Le produit lui, est très satisfaisant.

As others have noted, the instructions are rather poor, but the finished product is good. The cushions could be a bit thicker, but it's really sturdy and looks nice. I would give this 5* if they provide decent assembly instructions!If you buy it, you may want to review these notes below - had I seen something like this before assembly, it probably would have saved me close to an hour of struggling.THE CHECK LISTBooklet says there are FOUR items E, but in fact there are two items E and two items E1. you will note that two of the bars are about an inch shorter than the others.There is no item K listed - there are EIGHT K items - these are the plastic spacers that you will use to assemble the sidebars to the bench/back.I had an extra P and extra PP bolt in my set that were not needed, and one of the M6 caps (Z) was stuck comletely inside the M8 cap (took me a moment to figure out why it seemed an M6 cap was missing, and one of the M8 caps didn't seem to fit the bolt!)STEP 1This is fairly straightforward, EXCEPT KEEP EVERYTHING LOOSE - DO NOT TIGHTEN THE FOUR TOP BOLTS YET AND DON'T INSTALL the nut caps. In fact, try and keep those bolts on the frame AS LOOSE AS POSSIBLE at this point. You CAN tighten the four bolts that hold the back support bar (F) and attach the m6 nut caps (Z) at this point.When assembling the side panels D to the frame, make sure the frame widens enough or you will have difficulty getting the bolts in. I found it easier to install the top bolt on one side of the side panel and then the bottom bolt on the other side first. Again, get ALL four bolts into the side panel FIRST before tightening any of them.At the end of STEP 1, now TIGHTEN all the bolts, and install the four M8 caps(Z) to the bolts on the top of the frame.You will find it FAR faster and easier if you have a right-angle ratchet drive that takes bits and have a set of hexagonal bits. It's pretty slow tightening them with the supplied wrenches.STEP 2The flat part of the back frame faces the seat. You will use the eight spacers (K) on the J and J1 side arm supports between the side arms and the back/seat.DO NOT ATTACH THE SWING TO THE FRAME JUST YET! It's easier to install the canopy with the swing out of the way.STEP 3Getting the canopy onto the frame can be a bit difficult because it's very tight and requires some strength to pull it into position, and it's easier to handle this if you don't attach the swing yet. I found it best to attach one side of the canopy, then upend the entire swing with the attached side at top. You can then step down on the frame of the canopy (now on the ground) to hold it down and lift up on the frame to slide it into position on the plastic gears. Then upright it all and install and tighten the two big knobs, making sure the canopy angle is match on both sides.NOW, you can attach the swing: Take the swing supports E and E1, making sure the SHORTER one's are at the front, and the LONGER one's are at the back. Attach the swing supports to the bench seat on the front and back hooks, attach the spring to the other end of the Swing supports, THEN lift up the side of the swing by the spring and attach the spring to the frame. Do the same for the other side.The lights are nice, but there's no indication as to how to mount them, nor are there any clips which you will need to attach them to the canopy, and the solar panel will have to be mounted (somewhere) too.Note that the sidetables have two support bars on the bottom that fold out and clip onto the bar below to secure the sidetable in place. If it's in a windy place, consider using a tent hook and a chain/wire to hold the legs down as the canopy acts a bit like a sail.Hope this helps :)

Such great quality and so easy to assemble. My wife helped me and it took less than 39 minutes.Comfortable and beautiful addition to our patio. It is now the main focus. Love it.