BBDINO Silicone Mould Making Kit, Super Elastic Platinum Silicone Rubber 600 Grams, Ideal for Silicon Moulds & Food Moulds 1:1 by Volume Jade Green

Fantastic product and really easy to use. I wanted to make some custom silicone moulds for a project I’m working on. It has a 1:1 mix ratio, so it’s simple to measure out the two parts. They mix well and need about five minutes of stirring. Once mixed, you pour it into the mould container—it’s a nice thick consistency and pours smoothly. The mixture produced very few air bubbles, and none appeared in my finished moulds. I was making small to medium moulds, and they seemed pretty well set after an hour or two, but I left them for about six hours before fully demoulding. I’ve used the moulds several times now with no issues—no cracking or wear and tear. I would definitely recommend this product

Love this! I bought it ages ago but was to anxious to use it, because the resin item I wanted to use was expensive, and I was worried about damage. I finally found courage because I couldn't find a horseshoe mould I liked, so bought an actual horseshoe. So I made a mould of the metal horseshoe and the resin bauble. Perfect! Definitely flexible, more than im used to, and I haven't made perfect moulds, I'll need to tidy edges a bit when my ADC shoes have dried. But the moulds themselves are fantastic. And now I have confidence, ill definitely be buying this stuff again!

For me it was the first time I’ve made a mold…so I couldn’t compare it to others but this did exactly what I wanted…easy to mix and no bubbles.

So the good, this has the best degassing agent I've seen. All the bubbles in my mould naturally rose to the top and popped as it cured at room temp and pressure. Very impressive. The colour is ok but it prevents you seeing into the mould as it obviously blocks light, not a problem for the most part. What is a problem however, is that part of the mix doesn't ever actually cure, but it isn't silicon. All the actual silicon sets creating a great mould, but the master and mould inners are left with a very thin but tacky white substance covering them, one that doesn't come off with soap or even ISO. I suspect that whatever agent is being used to degass is actually not setting at all, but separates and works its way inward and outward of the mould. While this hasn't altered my mould, it is kind of annoying, so be careful with it on finely detailed and small pieces, because you will need to clean them thoroughly afterwards, no matter how long you leave the silicon to set.

Okay, I've used this for long enough to write a review, and I have to say, I'M OBSESSED. I'm VERY new to resin and moulding. The small amount was on offer, so I thought great, the reviews are good (which doesn't always really mean much), and was purchased a lot of times, so I bought it. Now to the review. This mould is amazing. At least for beginners. I can't comment on how good it is compared to other silicone moulds, but for my applications (turning 3D prints into resin. Anything from models, earrings, boxes, anything you can print really) this is incredible. It captures EVERY detail. It even captures the layer lines (which means more sanding and painting for me before moulding, yay 🙄). This mould is also very flexible, but VERY strong. For example when moulding something such as a cone (why? A wizard hat) and you need the wide brim to go through a small hole, with some cuts of a craft knife, you can stretch it to get the model out and it goes back to its original shape perfectly. I can't fully comment on longevity of moulds, but for now I've been using the first one I ever made (a small low-poly Bulbasaur) a few months ago and the mould still works. Also, IT DRIES/SETS QUICK Now to value for money. Buy small, see if it's a product you'd like to use. If you like it, I'd say go for the larger volumes. You DON'T want to run out in the middle of a project, I ended up wasting half an order (of the smaller bottles) because of that. To sum up, great value for money, has always been on offer when I bought it, efficient, effective, fast, flexible, strong, amazing!

Just great 👍

Works well

Easy to use with 50/50 ratio. End result easily achieved overall even for a complete beginner as long as instructions are followed. However , very poor value for money as the quantity is small. Found other products cheaper for bigger quantity elsewhere.

気泡もすぐに抜けて商品はとても良いものです。が、購入先の評価をしっかりと確認されて購入をされた方が良いと思います。いい加減な業者に当たることがあります。

De muy buena calidad, fácil de usar.

I find this silicone to be very flexible, the softest I have ever used. It was cast into a 3D printed PETG mold with no trouble. I debated if it was going to have a negative effect on resin part casting, but it worked very well for some smaller parts I make. I also use a pressure pot for the resin curing and didn't have trouble with the mold changing shape, even though I have these designed to use the absolute minimum amount of silicone (not enough silicone lol). The geometric shape being cast has torn a firmer "brand name American" blue silicone much easier, likely due to the small opening I use to remove the part. I use a sulfate free clay to hold my parts in the mold and there was no reaction to the clay. I did degass the silicone in a vacuum chamber and had absolutely no air bubbles, even after using a plastic mixer on a drill to combine the two parts equally. Working time is dramatically increased when ambient air temp is 18 degrees with cure at 5-6 hours. At the recommended 25 degrees, it was cured in 2 hours as they note. At both temps it was easy to use the vacuum chamber. I made 4 molds, three times, using different temps between 18–25 degrees and all succeeded. Cast 48 parts with no flaws or failures at all.

جودة ممتازة

Moyennement satisfaite. Le silicone se mélange bien et est très simple à utiliser. Il n'y a aucune bulle à la couler mais j'ai remarqué qu'il manquait 50ml dans chacun des bidons.. Je n'ai donc pas pu remplir mon dernier moule qui n'ai rempli qu'à la moitié. Les 100ml manquant aurait était pile poil ce qu'il me fallait..