XPEL Clear Universal Door Edge Guard (0.38" x 12') Paint Protection Film Kit

Great item. Very discreet and does the job very well. Will buy again

I bought this "XPEL Extra Wide Door Edge Guard" for my new Mercedes' doors. It came as 2 rolls, but even one roll is more than enough for my new car. Very easy to apply and it can accommodate all the curves and angles. I sticked it on the outside first and then slowly rolled to the back one segment after another. The most important thing is not to stretch or pull too much while making alignment along the door edge. After everything done, I used the hair dryer and pressed a bit to make sure all stick well. Much much much easier to stick than I thought. Very highly recommended.

Of all the protective films I've worked with...doing the doors edge is probably the easiest and the results are fantastic. Starting with just the top of where you want to start along the door's edge. Give it an extra inch but don't press the entire thing just yet. Press just a bit only that it holds on. Don't pull the backing all the way off already. The trick is press down against the tape while pulling the backing on the back side. This should be easy to do with the backing partially already pulled and continue to hold down film and slowly observed the guide of the film while doing this. Once you have the film to where you want to stop go away and cut it off. Now, with only part of the film press on, gently guide the rest bit by bit until you're the film gets fully pressed into the inside of the door's edge. Towards the uneven curve, this is where you need to be patient and press down firmly going towards the inside. This will ensure the films adhesion. When you take this approach, there should be no bubbles as you're going but by bit. The clear film and the width of it is literally invisible unless you focus on it when. Looking at the doors edge for the film. Love that the film is stretchy to work with the curves and corner. The appearance from a distance like I said before is basically invisible unless you try to look at it

This is a great option for capable and patient DIYer’s. Product is of high quality and be sure to wipe your door edges with alcohol prior to applying. I used a heat gone for 1-2 minutes to ensure adhesion. Worked great!

I used this along the door sill edge in my brand new truck. It's an area prone to wear from people dragging their foot as they climb in. Once applied you can't even see it, yet it's thick enough to provide great protection to the edge. Very happy with this.