4 port VGA KVM

Connection was very easy and straightforward. KVM Switch works very well. Good video quality through the switch. The only thing that I noticed is that the switch resets itself to "PC1" once you turn off both PCs. Therefore, if you go back to use the PCs the next day and you decide to use "PC2" only, you will need to select "PC2" manually via the switch before you can start. Not an issue, just a little tidbit of info. All-in-all, good price and works as intended.

Working perfectly 👌

Works great. Outstanding value

Nice and simple design. Work well and easy to use.

Quit working after three or four months use

For many years I used a switch that allowed me to use 1 keyboard and 1 mouse to operate 2 computers. But this is far better doing the same thing on 4 computers. A big plus is that is comes with the VGA cables and the cables that control each computer. There are 4 butten switches to select the computer you need. Installation took 10 minutes.

Excelente

Works as expected, just questionable designs. Port 1 and 2 are on the back, port 3 and 4 are on the front?, VGA out to the monitor is on the left side, and 3 USB 2.0 ports on the right side. There is no remote or hotkey, so you will have to have this hot mess of wires within reach. For the money it works fine and is probably the cheapest 4 port KVM switch you'll find. I just wish they either made it a little wider to have no ports on the front, or included a remote. One glitch I encountered (which the 2 port which I also have does)...if you start a computer, but aren't on that channel as the computer starts - you will be stuck at a strange resolution. 2 work-arounds - 1. unplug and plug the VGA cable to that PC, or restart the computer and let it fully boot before switching channels. Besides the above, it works great. The cables are about 4' long which I prefer (generally you have the PCs next to each other when you use one of these anyways).' I rand into an issue that is annoying enough to drop a star. If only one PC is connected to the KVM, and it isn't on channel one...you will have to switch with to that one PC if USB power gets lost or you are starting it up. You'd think that since the USB is powering it that it would know which channel to switch to. In my case I had a PC on channel 4, and every time it would restart, I'd have to re-select channel 4. Really a PItA when you are trying to hit F12 trying to catch the startup menu before the slow hard drive starts to load windows.

Nyttig

Ok

Gute Ware

正常に動作して使える。

Je conserve mes appareils jusqu'à leur fin de vie et continue à les utiliser avec d'autre beaucoup plus jeunes. Mon vieux pc (il a entre 18 et 20 ans,sous xp) est connecté à un écran sous vga en 1920x1200 (écran 16:10) qui n'accepte pas cette définition en dvi. Cet écran est partagé avec mon dernier pc qui n'a pas de sortie vga mais dont la sortie hdmi acceuiller un câble qui le traduit en vga. Les deux câbles vga sont reliés au boîtier KVM lui-même relié à L'écran. Les deux pc fonctionnant en même temps il est facile de basculer de l'un à l'autre avec le bouton approprié avec la résolution maxi. Il est possible grâce aux connection usb de partager le clavier et la souris mais je n'utilise pas cette fonction. Je n'ai pas trouvé de solution plus simple pour partager un écran.