- TOWOND Projector Screen and Stand, 150 inch Indoor Outdoor Projection Screen, Portable 16:9 4K HD Rear Front Movie Screen with Carry Bag Wrinkle-Free Design for Home Theater Backyard Cinema

I will be giving a presentation in a large dining hall in a couple of weeks. The hall has no screens for projections, and I need to be able to project large enough for people to see from about 80 feet back. Further, the entire East wall is glass with no drapes or other covering, so there will be a lot of ambient light - especially right after lunch at noon. I have a fairly bright projector, but I needed a portable projection screen that gave me at least 9 feet of horizontal display area. I selected the Towond 150" screen after reviewing it and others and checking the comments. This was a good choice. The Towond screen arrived packed in it's carrying case. The black plastic fabric case is 32" long x 6" x 7" with a carrying handle, and is quite light - their data sheet says 11.5 pounds, but it feels lighter. The case contained all the parts, a minimal pictorial instruction sheet (which was sufficient). The screen itself is in a separate, heavy-weight, zip-lock-type bag to protect the soft white polyester screen. Set up was easy by following the directions. The top-bar pieces are individually numbered and shown clearly in the instructions. The two vertical legs need no assembly - just loosen the friction locks and extend the vertical posts. I was able to set up and take down single-handed with no effort. Suggestions for the easy way (IMHO): 1. Set up the vertical legs approximately where you want the screen to be located. Loosen the clamp holding the three bracing legs against the center post and extend the bracing legs until the connecting parts between the bracing legs and the center post are horizontal. (Note - the safe way to open this is to pull each of the three bracing legs outwards.) Tighten the clamp so the bracing legs are firmly set. 2. Extend just the upper-most vertical leg pieces on both legs. (Leave the lower two extensions down.) 3. Assemble the cross-bar - follow the directions and ensure you have the bars in the correct order AND the two end pieces should have the larger through-holes at the extreme ends. 4. Remove the wing nuts and washers from the legs and set them aside. 5. Slide the screen onto the cross bar - take your time and avoid catching the fabric on the feeding end of the cross bar - don't get impatient and tear the material. (The material seems strong enough, but just take it easy...) 6. (one person can do this easily, but two make it real easy) Place one end of the cross bar on the post on one leg, then repeat with the other end - moving the leg as needed to match the bar length. Make sure both legs are stable and not tilted. 7. Fasten the bar to the legs with the washers and wing nuts. 8. At each end, fasten the top two velcro straps around the top-most leg sections (if you don't do this now, you may need a small step-ladder later). 9. At one end, loosen the next section and extend it (I was cautious and did this in two steps to avoid stretching the screen material. There is a marker line when it is fully extended. Tighten the clamps on both ends fully. 10. At each end, fasten the next velcro straps around the middle leg sections. 11. At one end, loosen the last section and extend it. There is a marker line when it is fully extended. Tighten the clamps on both ends fully. 12. Fasten the remaining velcro straps around the lower leg sections. 13. As needed, adjust the legs (and/or velcro straps) to remove any sag or ripples. (Note - I am only using this indoors, so I didn't use the ground anchors or the tie-downs.) Disassembly is similar, but even easier: 1. Unfasten all the velcro straps on both ends (all the ones you can easily reach - you can leave the top ones for later). 2. Slowly and easily, loosen the bottom leg section clamps and lower the legs, then tighten the clamps. Again - I did this in two steps to avoid excessive stretching. 3. Repeat with the middle leg section clamps. 4. Unfasten any remaining velcro straps. 5. I found it easiest to remove the cross bar and screen at this point, with the lower leg section still extended. 6. Remove the wing nuts and washers from the two legs and put them aside. 7. Remove the cross bar and screen from the legs. Note - ideally have a very clean floor/rug, or if you have friends helping, try to keep the screen clean while disassembling. 8. Slide the screen off the cross bar. Fold it down into a small enough area to fit in the screen zip-lock bag. 9. Disassemble the 5 cross bar parts and put them back in the longest bubble-wrap bag. (Note - rubber bands around the ends will make getting them in the bag much easier.) 10. Fasten the washers and wing nuts on the legs. 11. Loose the last vertical sections of the legs and collapse them fully, then tighten the clamps. 12. Loosen the clamp holding the three bracing legs on each support leg and collapse them, then tighten the clamp. 13. The two legs now fit in the two smaller bubble-wrap bags. 14. The three bubble-wrapped pieces (legs and cross bar) and the screen bag all now fit in the carry bag. So - I set it up in our dining room where the east-facing wall is all glass - clear and very sunny day here at 1PM. I set up the projector with the sunny display behind it and the screen facing the bright daylight. The projected display on the screen was sharp, clear, and plenty bright. Very satisfied - easy to assemble and disassemble - excellent image quality. The materials all seem to be good quality. The metal parts all seem solid and well made. The screen folds and unfolds and doesn't appear to take any creases. Overall - great product - exactly as described and works great.

This works great for my outdoor Halloween show. I ended up making my own frame because I suspended it on the house. The frame that comes with it would have worked though. My only complain is the bottom lacks support so in the wind it's going to flap a bit. I used plastic allegator clips with strings and weights to minimize movement. Worked great.

This product is good, the only thing is that the cross bar on top is not sturdy and sags. Easy to assemble and good quality.

Overall, I’m very happy with this projector screen. It was easy to set up, the quality is great, and it offers excellent value for the price. I would definitely recommend it.

The size, generally easy assembly of the screen, and the ability to see an image on both sides made the concept a good one. However, the tripod failed to lock at appropriate heights after about 6 uses. Emailed the company, received two canned answers (seemed computer generated). As soon as I asked for a replacement tripod -- no reply. Update - received a reply and a new screen with tripods etc. Too bad the product didn't last long in the first place, but kudos for the final customer service effort.

Initial Review (05/16/2026): The image I attached is only part of the way up because my ceiling wasn't tall enough. I set it up by myself, but....it would have been easier with 2 people. Don't put the crossbar on until you feed it through the top of the screen. That will make it easier. However, its nice. Seems made well enough. I think I'll buy some better ground anchors just to make it more secure. I plan to use it outside for movie nights. And....the size is huge. My brain wasn't comprehending just how big it would be until I set it up. Looking forward to movie nights now.

Great screen. Easy to assemble and disassemble.

When I opened the box, I noticed that the screen itself was wadded up and stuffed inside the carrying case. Randomly there was an instruction manual for a thermal printer also wadded up and shoved in the case. The screen had previously been used and had also been walked on. Clearly visible black boot prints were on the plastic sleeve that the screen should have been folded nice and neatly inside of. Boot prints were also on the thermal printing instruction manual and across the screen itself. I had already been setting up for my daughter‘s Sweet 16th birthday party all Friday night all by myself and deep into the wee hours of Saturday morning for her party on Saturday. The screen was one of the last things I was going to set up. When I opened the box, I was mortified!!! I spent 2 full hours stain treating the screen trying to get all the black boot prints and smudges out of it. Washed it by hand and didn’t make it to bed until 6 AM Saturday morning. This was not something I should’ve had to deal with when paying a lot of money for a brand new screen, thinking it would be unopened and clean upon arrival!!! I can attest that the screen can be cleaned and hand washed and hung up to dry. Once the screen was fully dry, I was able to assemble the screen and stand, and it worked perfectly for her birthday party to project music videos, and movies on. I highly recommend the screen and stand itself. Do not understand how a used and damaged product was sent to a customer. If the product had been returned previously, it should have been inspected instead of sent out with the next order that came through. What a complete joke! Check out the photos!!! Thank goodness for Shout and Tide Ultra Stain Release!

المنتج عباره عن قماش واعمده القماش جيد نوعا ماء الاعمده ضعيفه غير مناسبه في الاماكن الخارجيه نسمة هواء ترميها

Good product great price

Nice fabric for the screw , but the actual stands are build with poor quality metal, easily bent with the slightest breeze and even bends and squashes the metal when you tighten the screw points to set up the stand in the first place. Very flimsy.

Estamos muy contentos por éste producto, nos ayudó mucho porwue lo utilizamos para proyectar por la parte de atrás, y así no interfiere si se cruzan por el frente, la calidad es muy buena, sobre todo para lo que proyectamos, lo que tuvimos que adicionarle fue unos postes colados en una base de concreto y nos ayudo con el viento.

Easy to assemble and disassemble. Great for hosting pool parties