CeKay Outdoor Antenna/Weather Station Adjustable Mounting Pole with Extension Universal Mount Brackets - Easy Installation, Solid Structure, Weather Proof (1" Diameter, 49 1/2" Arm Length)

Did the job! Good construction.

Easy to assemble and mount on the side of my house or on your roof. Very strong and stable in local winds. It gets your antenna up in the air and away from your house or roof. Well worth the money and big and strong.

Was able to install this onto the side of my garage. I am still waiting on my antennas but the mount option is good. I would advise having a 10mm wrench for this project. Overall it is simple and has the ability to extend with its accessories. My only concern is that there is a wiggle between the mast and the pole, I say if you use washers on the inside of the mount, it might remove the wiggle. Will update the review, if it doesn't last though a high-wind storm.

I will use this as a mount for a Discone Antenna for my scanner. The internal pipe is large enough to pass a PL259 or UHF N connector through the inside of the tube with ease. I would not use a larger coaxial cable that RG-58/59 or 8X as an example. The reason is the bolts used to secure the sections together pass through the middle of the pipe. So make sure you run you cable and connectors through before you assemble the sections. The pipe is small but the pipe walls are thick so it provides adequate support for most compact antennas...j

worked great good value for the money doable fit excellent

Right after I installed the weather station on top of the roof with this pole we received some of the highest winds of the year with gusts up to 60mph as per Weather station reporting and it stood up!I am thinking of adding steel tension cables later this summer just to never worry about it for years to come but honestly it is surprisingly good.Some feedback to the manufacturer: in US most roofs have wooden rafters (beams) of 2 inch width every 24 inches, the mounting plate you have allows mounting one side of the plate to the rafter but the other one just sticks through shingles because 2 inch width is not enough. I'm sure there is some exoskeleton design that can deal with this, please consider updating it!

Lightly built but easy to install.

It works but the price is a little high for what it is.