W10721967 Washer Pulley Clutch Kit, W10006384 Washer Drive Belt Replacement kit for whirlpool, kenmore Washer, Replace W10721967, W10006356, ap5951296, W10315818, PS10057144, W10006352, W10006353

Super tout fonctionne à merveille aucun problème pour l’installer elle fonctionne comme une neuve MERCI

This item worked perfect for my washer. The fit was great and only took a few minutes to install. Belts were tight but was able to get them on without a lot of trouble.

Washing machine was making a grinding sound when it started the wash cycle. I thought it was a bearing going out. Researched and found I just needed this part and I got it fast and replaced. Works well so far, been running wash for over a month with no grinding sounds now! Easy to install, just lie the washing machine down on its side. Careful, because there may be water in the tub. Have towels ready.

Kenmore 110 installed parts, was really easy only issue is I had to reuse my old belt because the one that came with the kit was to small and the splines on the pulley were plastic so we will see how it holds up

Top teeth on the clutch are about double the size as the OEM part, but seems to result in a better tighter engagement, which was my original problem with the EOM. On heavy loads, when the spin cycle was slowing down, at the end several loud bangs would occur as the OEM clutch was slipping over the teeth when the motor was in reverse to stop the load. Pulley is slightly larger then the OEM part, but the belt is slightly smaller than the OEM part, hence the belt was too small to use, but original OEM belt was in good shape and worked like a charm. There may be a way to adjust the motor to use the smaller belt, but I did not investigate as I had already installed the old belt. Also, our washer required the clutch housing to be turned slightly counter clockwise to remove it. New one did not want to rotate clockwise as it was a tight fit with thicker plastic. Using a flat blade screwdriver and my hand it was possible to tap each fastener a few millimeters until it was completely in place.