Cooler Master MasterBox NR200P MAX UK Plug Mini-ITX PC Case - Tempered Glass Side Panel, 280mm AIO CPU Cooler, 850W 80-PLUS Gold PSU Fully Modular, Vertical GPU Support with PCI-e 4.0 x16 Riser Cable

everything is perfect. well packed and high quality product.

As expected, all in one with cooler, psu. if you want ITX case, this is the one you're looking for. **Update, all seems working fine, some issues with my cables thats why power is not turning on.. Im happy with the product.

Definitely a bit on the larger side for itx cases, yet makes good use of all that size. Can fit in micro atx boards, two 2.5" hard drives, and all the water cooling you might desire. Build quality is good, and design is subjective but IMO the NR200 has a sleek look especially in white.

Hi, Using NR200 (Not P) with my Strix B550 + R9 3900X + Asus Rog Stix3070TI + NZXT X53 + Coller Master 850W PSU from last 4 months now. 2 Months back i decided to shift my components to Dan A4 H20. Here is the result. NR200 Build - Easy, you can easily do the cable Mangement, lots of space available. You can easily put a RGB\PWM fan extender. You can easily mount two extra top fan, and one read fan is already installed which help in cooling a lot. You can easily mount 3 or 4 SSD's. DAN A4 H20 - Complex, you would have to bend lots of cables, bend Kraken X53 pipes to adjust the cables. No space for extra fans or SSD's at all, so you have to rely on only two top exhaust fans. Which means, high temps if you are going to use 12 or 16 core CPU. You can only add one SSD. My Motherboard can support 2 M.2, one in front, one at rear. For read M.2 i am using Heatsink, you cannot install M.2 with heatsink in Dan A4 H20, but in NR200 its not a problem at all. GPU - I was able to fit 3070 ti in both cases, in NR200 its pc of cake, in Dan A4 H20, you are always worried if you would break something. And its challenging to plug 3 PCIE cables. Good Luck with that if you are going for Dan A4 H20. NR 200 Temps - Max cpu temp is 72 avg 55, i am 1080p game player so GPU temps are always below 70 around 62. Just for info, CPU temps are better than tower casing, may be because i am putting my CPU on my table where air flow is excellent, as compared to Tower, which is always below my table so limited airflow. Dan A4H20 - After assembling everything in 2 hours or so, i was unable to turn it on, tried to figure out but unable to do it, doubt is on cables, there are lots of bend cables, i don't know which one was creating problem so simply shift my parts back to NR200 and returned Dan A4 H20. Size: Yes you can fit Dan A4 H20 in a normal backpack, NR200 you just need a bigger backpack. Final Thoughts: Use Dan A4 H20 for a light usage machine, like 6 core CPU, with Air Coler so that you can install two exhaust fans on the top. Use a small GPU, at least not a Rog Strix. If you want to build a 12 or 16 core CPU with a beefy GPU, go for NR200. Regards, Mazhar

Very impressed by the quality of the build. The case feels premium and it's quite easy to remove the side panel. The AIO is a bit noisy and I can't seem to remove the air bubbles. Otherwise it's cooling the i7-14700k nicely. Not tried the tempered glass panel yet. I suspect it might not be worth the trade-off of higher temps. AIO installation instructions could be a bit clearer on the orientation of the parts. It had me confused for a while

Mini-ITXケースとしてはやや大きめで、かつ内部構成は電源が前部設置になる以外はとても一般的な配置をしており、とても組みやすいケースです。私の購入した個体はきわめて作りはよく、どのネジ穴もピッタリ合いました。そもそもネジ固定部分が少なくて済むように設計されているのがとても良い。前面・サイドはネジなしで開きます。 やれ裏配線だ、RGB LEDで光らせるだといった魅せるケースとは対極。パソコンはキチンと動いてシンプルがいい、でもメンテナンスはラクなのがいい、それでいて部屋において溶け込むケース・・・こんなのをお望みならぜひともオススメできます。（光らせたい人はNR200Pを買ってくださいませ） 上面がメッシュになっているのもあり特に上方向への通気性が良いので、高発熱のパーツがなければケースファンなしでも充分動作可能。実際にi3-10100+GT1030というローエンド構成でためしましたが、ファンあり/なしでCPU温度に差は出ませんでした。ちなみに3スロット型の小さめの廉価グレードmicroATXマザーボードもケース底部のクリップパーツを外すことで搭載できます。 とても個人的な意見ですが、高さを20 mm、幅を20 mm、奥行きを少々大きくしてMicroATX+ATX電源が純正状態で載る「NR300」をこのデザインで作ってくれたら最高なんですよね・・・！どうですかCoolerMasterさん！！

Muita qualidade.

Molto bello! Un pò piccolino ma ho scelto per problemi di spazio dove andava messo. Comunque ottimo materiali di qualità, montaggio bisogna avere un pò di pratica perchè lo spazio dentro non abbonda. Consiglio di valutare bene se utilizzare un radiatore dopo aver messo dentro MB e alimentatore.

Als PC-Bastler wollte ich schon immer einmal einen Mini-ITX-PC aufbauen. Das schlichte Design des NR200 hat mich überzeugt. Das Gehäuse ist super verarbeitet und trotz der kompakten Größe sehr zugänglich. Ich hatte schon größere Midi-Tower, bei denen die Installation der Hardware fummeliger war als hier - hier wirkt alles gut durchdacht. Es lassen sich viele Lüfter montieren, unter Anderem zwei 140er an der Seite, was dem Airflow zugute kommt. Hinweis: Je nach verbautem Netzteil sollte man sich bei einem der 2 oberen Lüfter (1 ist bereits im Lieferumfang dabei) für einen Slim-Lüfter entscheiden, da zwischen Netzteil und oberer Decke nicht super viel Platz ist. Für mich ist das Gehäuse ein absoluter Glücksgriff und ich kann es wärmstens empfehlen!