EKR Custom Fit Civic Neoprene Car Seat Covers for Select Honda Civic Hatchback 2016 2017 2018 2019 2020 2021 - Neoprene (Black)

Several reviews have gone over how great these are, and honestly the front ones look like they came from Honda that way. I'd buy these again in a heartbeat. I'm mostly here to talk about the installation.This is likely going to be a several hour project. I spent at least an hour fighting with the bolt to get the back seat in place, but we'll go into detail on that later. Any difficulties I encountered installing these is on the part of Honda, NOT EKR or the product.First, make sure you take EVERYTHING out of the box they send you. Why? Because there's a little orange tool in there that is considerably smaller than my fat hands that makes a world of difference feeding these covers into tight places. I didn't notice it before I had the back seats on, and my very bruised hands would have been happy to have that. Now about that back seat... there's a 10mm bolt you need to remove that is just to the right (facing the seats) of the right-hand seat belt clip. A deep well socket and a short extension makes it easy to get to. Just pull up on the back of the seat or down on the cushion and it's pretty easy to spot. Putting this back in after I was finished? The bane of my existence and probably took 45 minutes of arguing with it on its own. About the middle of where both the left and right seats would be, there's a clip that you can squeeze and then lift the front of the cushion up. I have poor grip strength, so I opted for some adjustable pliers and in total the cushion was off within a couple minutes.Putting the covers on was relatively straightforward and simple. The elastic straps work really well and hold these in place just fine. It only took a few minutes actually get the covers on, strapped on, and for the back, to get the zippers closed. These covers seem to go on the same way Honda's seat coverings do, and in this case it greatly simplifies things.For the front seats, I recommend doing the base of the seats first. The instructions (which seemed to me to be much better than other reviewers have stated; probably have been updated since their reviews), show the back first. That's what I did, and while it doesn't complicate things, it does make putting the bottoms on a little more difficult.When I did the bases, I moved the front seats as far back as I could and tucked the straps through the back. I pushed the straps at the front of the seat as far under as I could. This way, you can slide the seats as far forward as they go and you'll have the straps peaking out the back and they're much easier to get that way, while also leaving you room to work from the back seat. Then do the backs of the front seats. You'll have to tilt them a ways back to get the headrests off (and those covers go in in about 30 seconds each), but it took another few minutes to get both backs on and zipped into place. The strap they include there ended up going on one of the stiff wires for the heated seats, as that was all I could really reach.All in all, it took me about four hours total to install these. Almost all of the straps running front to back make these considerably easier to put in than generic, one size does not fit all seat covers. If I didn't know better, I'd swear my car came from Honda looking like this. I would absolutely buy these again in the future. We'll see how long they hold up, but very happy with them as of right now.

I'm knocking a few stars off this review because I had a strap on the drivers side bottom seat cover break on me. Not just break, but completely unravel.Edit: The seller sent me a replacement and was super helpful all the way through. I am reverting back to a 5 star review. These seat covers are pristine to be be quitehonest. Best covers i've purchased for less than $200.These seat covers are really nice and at least for me, the front ones are a perfect snug fit. The back ones however are not. They are misaligned and cut way too close. In order for me to get the bottom seat covers on, I had to offset the right side because the opening for the hook where the rear bottom seats are bolted in was cut about 3.5cm off center. They still look nice, its just clearly not measured correctly.The paper instructions aren't easy to follow, because the pictures which it was printed with are 360p pictures. The instructions are not very detailed or clear especially for a first time installer. The videos on their youtube channel are stock copies that are shot in vertical with no sound or music. There are even less instructions on how to install things in the videos. They copied and pasted the same video you can find on any other seatcover installation from an amazon seller. I would suggest watching Car King's video on seat cover installation. The methods are virtually identical, but they use a different seat cover and they show you how to remove the rear sets for seat cover installation. I hope this helps someone.You NEED to unbolt the rear bottom seats to install these seat covers. It's not hard at all. All you need is a 10mm socket and an extender about 6-7in to get in between the seats. Once you the bolt is out with the washer, just push down on the seat and pinch the tabs underneath and it will release. If you do not press down on the seat, the tabs will not release. Once the seat cover is on, you need to line of the seat hook and attach the socket back into the car before you relatch the seats. This is the most time consuming part, because the seat hook does not want to line up. Might be a good idea to have a second pair of hands to help.

READ CAREFULLY!!!! 2018 Civic LX Fit's like a glove! Some reviews said these won't fit the 2018 Civic LX. I assume something changed or they ordered the wrong version. Make sure you order the proper version for the Civic you have. My 2018 has a 1 piece back seat and the head rests are non removable. So that's the version of the seat covers I purchased and they fit perfectly. There are other versions of these seat covers that are not for the 1 piece non removable head rest back seat Civic LX 2018. The quality seams top notch so far. I doubt it's real leather but it feels great. And there is nice padding underneath too. We will see how they hold up over time but so far night and day compared to the competition. Yes these are not cheap but they definitely seem higher end and better quality. Carefully read the descriptions. Also be careful which reviews you read. If I had just purchased these from the get-go, I would have been all set. I tried cheaper car seats and they were not good quality. These are amazing so far.

The quality of the material and really nice. The front seats are a relatively easy installation. However, the back seats are a little more difficult. I wasn't able to install them as well as the first seats, however, it's good enough as I don't really have anybody that sits in the back seats that much. One thing to note was that the passenger side site was missing a strap on the bottom. It's not that big of a deal but still, there seems to be some quality control issues. I would highly recommend them as they are a good value compared to the really expensive $200 custom seat covers out there.