CARPROCQUARTZ SiC 50ml Kit - Car Ceramic Coating Finish, Quartz Based Nanotechnology, Bonds to Paint, Glass, Metal and Plastic

This has been hands down the best purchase I made for my cars ever.Bought a new Chevy SS sedan, and within a week of getting it, I applied this.I washed it with their car shampoo first, then I prep-sol'd the car( a step they didn't mention, but I did anyways to make sure I was applying this to virgin clean paint). I didn't need to do any buffing or paint correction, as my paint was unblemished, and smooth as can be( you may need to do that step though...).I applied it EXACTLY as instructed. I did everything- paint, lights, trim, even the windows(though they recommended not to, it worked out fine for me). I even took the wheels off, and did them and the hard to wash Brembo painted calipers.Nearly 4 months later, and it looks like I put it on yesterday. Water beads off amazingly from ALL the surfaces I applied it to.The only downside to this is that if you wash the car with ANYTHING but their brand of car shampoo that they recommend, you risk damaging the coating. I washed it ONCE with Meguiars Wash and Wax and it did NOT bead up like it did before. Waxes actually build up on the surface of the ceramic coating, and will bead LESS than the coating. It's really weird. But I washed it the next weekend, with their car shampoo, and the beading effect was right back to the way it was before the Meguiars. Theres a reason they guarantee the length of time the coating lasts, when applied and maintained properly.This is legit an amazing product. NOTHING sticks to it.If you buy this... do yourself the favor, and put the effort into applying it like I did, and also get their car shampoo and even their "Iron-X" wheel cleaner. And only use their products on it, as they recommend. Make your life easier for yourself.Took the car on a trip this weekend. Came home with a million bugs all over the front. Didn't have a chance to wash it at home, so I washed it at a do it yourself pressure washer car washer on the way to work. I only used the "clean rinse" setting(remember- no other soap but theirs). Like magic, the bugs were gone. No rubbing. No cleansers. Nothing. $2 and 4 minutes of time at the pressure washer.I can't say enough good about this stuff.

my truck new had been on the lot for few months. when i got it home and cleaned it i noticed lots of water spots that would not come off. i done paint correction with 3M ultrafineEX. after correction I had beautiful results and now time to try and keep it that way. i purchased numerous waxes and sealants. waxes used where zymol glasur. wolfgang fuzion. chemical guys petes 53 and XXX hardcore. klassur sealant and several other economical waxes also. after driving in the rain the beading and sheeting was always gone. water spots appeared again after several rains and drying in hot sun. done paint correction again to remove all spots and waxed truck. found cquartz while searching for paint protection on net researched SIO2 coatings and purchased cquartz. after arrival and reading instructions only had time to do couple of panels to test before rain coming in 2 days. so i decided to coat fender and side of bed to test. i buffed these panels to remove all waxes and any spots followed by IPA wipe. after application which was pretty easy i noticed huge clarity difference in panels coated next to panels waxed. a clarity none of the waxes could produce. the rain came 2 days later it was the remnants of hurricane Irma. wind gust up to 70 mph the worst i have ever seen at my home in north ga. my truck was completely covered in leaves small limbs and debris. took a while to remove all the debris so the truck could be washed. noticed when wash started a oily type film over all truck that just smeared. using a ph neautral car shampoo eventually finished wash. this is when i noticed the big difference. the panels coated with cquartz still beaded and water sheeted absolutely amazing. the rest of the truck with 2 week old coat of wax showed no beading or sheeting of any kind product was gone. this product impressed me holding up through that storm. i have since finished coating truck and the shine is amazing. i will update this review after a few months with results on product

This is my first time working with ceramic coating and omg there's no words to describe how satisfied I am. I ordered the 50ml size and it was more than enough for my coupe. I started with a powerwash, used soap that would strip wax, sealant and went to apply the first coat in the rear quarter panel. There's no need to apply too much cquartz, just enough to get the surface 'oily', and make sure to use microfiber towels that don't leave lint. After two minutes, I wiped the product off and immediately, the panel produced a shine and slickness that would for sure repel anything thrown at it. I then applied another coat (max 3 coats), wiped off after two minutes and went to the next panel. It's extremely important that you take your time and work in small areas as the stuff, once left longer will be hard to wipe off and possibly leave a stain. For example, I did 1/2 of my hood and roof at a time since the area would be too large to wipe off at once, keep in mind, you will get tired after wiping multiple layers off. Also, do not use in direct sun and make sure you are well ventilated as the product produces odor. The instructions also say to use Reload right after or wait 12 hours. Time will tell how long this lasts, but for now I'm just simply speechless.