","image":["https://m.media-amazon.com/images/I/715gjl4S6ML.jpg"],"offers":{"@type":"Offer","priceCurrency":"EUR","price":"206.98","itemCondition":"https://schema.org/NewCondition","availability":"https://schema.org/OutOfStock","shippingDetails":{"deliveryTime":{"@type":"ShippingDeliveryTime","minValue":6,"maxValue":6,"unitCode":"d"}}},"category":" standsandmobilebases","review":[{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"A***P"},"datePublished":"Reviewed in the United States on November 29, 2011","name":"5.0 out of 5 stars\n\n\n\n\n\n\n\n \n \n Great tool!\n \n","reviewBody":"I have never owned a jawhorse before, and decided to get this newer model, the sheetmaster, instead of the original. It was a little more money, but the added features and ability to handle 48\" wide sheets without buying additional adapters was a bonus. It is my understanding that this version is a little beefed up from the original, has the 48\" capacity out of the box, has a different wheel/rolling system, and is easier to break down.I wanted a jawhorse to basically use as a portable vise. To hold material securely when cutting off 2x material, to hold larger items while sanding, chiseling, or ripping, etc. I was sick of working on the ground, or inconveniently on saw horses, etc. Since I got it, I've also used it as a miter saw stand, which worked great.I watched and read a lot of reviews, and determined that even though this unit is expensive, it would be worth it to me, and it definitely is.It is super easy to set up and break down. It takes maybe 30 seconds to unfold a few legs and flip it over, and vice versa.The clamping force is great. I haven't tried to measure it, but it is definitely more than enough to secure whatever you put into it. The jawhorse is not really prone to tipping due to it's design, but obviously can if you force it, and I say this to say that from my off the cuff tests, I get the unit to tip before I can dislodge/slip the material that is locked in the jaws. This is to say, the clamping force is fantastic. And super easy to clamp something by allowing you to use your foot, which frees up both hands to make sure the piece is placed just the way you want it.I have yet to put a full sheet of anything into the jaws. It comes with an extra jig piece that quickly clamps and holds holds two pieces of 2x material at 90 degrees that is meant to be additional support for full sheets. The two pieces at 90 degrees form an \"L\" where the mid point of the long side of the \"L\" rests on the jawhorse to support the long dimension of the sheet, and the short side of the \"L\" rests on the ground. It looks to be pretty quick to set up, but you'd have to have that 2x material handy whenever you plan to do full sheets (maybe not as travel friendly then), and would have to set up the clamps each time. And then you wouldn't want to lose the clamp jig, and it does not store with the unit itself. This is all to say that yes it does full sheets, and I'm sure it is great at it, but it's not a fully integrated solution that all packs away into the unit itself. If you're going to be cutting a number of sheets, it's definitely worth it to set up the extra jig and go to town, but otherwise, you'll probably not be using it for single sheet cuts. This doesn't mean that the 48\" jaw capacity is not useful though, beacause there are still times where you may want to hold something \"long ways\" by its <48\" dimension, and as long as it's not wider than a few feet, you wouldn't need the support braces.One gripe I have about the unit, the only one so far (unless you count how cumbersome I view the support brace setup to be), is that when you try to wheel it, (a neat feature by the way, that you can compact it, and it wheels with the leg as a handle), a combination of the wheels being small and close together results in a lot of rocking while wheeling. You wind up fighting it while wheeling it, even on flat ground to an extent. Like a crappy suitcase where it's constantly on one wheel, then the other, then the other, back and forth, etc. You have to baby it to get it to roll properly, even on flat ground. If you are trying to do stairs, or go over grass or anything else, forget it. I personally have about given up on the wheels and just carry it. If you're going 10 or 20 feet across the garage, the wheels are OK, but more than that, it saves time and frustration to just carry it. My understanding is that the two wheel design this unit has is different than the single roller the original jawhorse has, and is supposed to be better. I haven't used the original, so I don't know how that one works, but I can say that I am not too impressed by the wheeling capability of this unit. It's fine for flat ground, and I guess not *too* bad overall. Let me say this... it's better than not having them, so there's that. But I do think they could be improved.One other note is that you need to be careful with the clamping force. It's hard to control just how much you use, and when removing it, just like an E-brake on a car, you need to apply *just* a little more force than you used to clamp/lock it, which means a little more clamping force needs to be applied to remove a clamped item. You wouldn't want to use it to hold anything delicate. For example, I tried a test piece of 1/2\" copper pipe, and found that it was difficult to secure the pipe without crushing it out of round. Even when I got it to hold without hurting it too much, it was far too easy to press too hard on the foot pedal when releasing it and just smash the copper flat. You don't realize how much clamping force it really has until you see this and how easy it is to do. It's one thing to clamp things in a normal bench vise where it closes slowly, turn by turn by hand, but with the jawhorse where you use your foot and a lot of clamping force is applied very quickly for what feels like not pressing very hard with your foot, it can be a problem for these delicate items. This is awesome when grabbing wood and items that aren't easily crushed, but it does mean that you want to be careful with anything that you would be weary about in a normal vise.I would remove a star because of the wheels, but it's not a key enough feature to me to do that. It really is a 5 star item IMO. Extremely well made, performs its functions extremely well, and is just a down right awesome tool. I love it."},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"A***Y"},"datePublished":"Reviewed in the United States on March 4, 2017","name":"5.0 out of 5 stars\n\n\n\n\n\n\n\n \n \n One of the handiest clamping systems I've ever used!!!\n \n","reviewBody":"I bought one of these in 2012 and it's used almost daily ever since. The main reason I chose this particular unit was because it is capable of clamping a 4'x8' sheet of plywood. It really will clamp a sheet of plywood securely! From a safety standpoint, it has really helped me. No one wants a sheet of wood to move on them while they are cutting, but I've had that happen numerous times. I don't have a lot of room and just haven't always been able to clamp my workpiece as well as I'd like to. This jawhorse fixes all of those issues.I made a plasma-cutting rail system that clamps into the jawhorse. It's heavy at 70 pounds, that's why I clamp it to the jawhorse. But it gives me a platform for making smooth plate cuts. I put my plasma cutter into a carriage and it glides over the metal plate below that is to be cut. Very nice straight lines, it's better than I could do by hand.I also purchased the welding attachment for this. This was money well spent, but I'll go into that in another review. The two are awesome together and give you an extra set of hands to hold things.The clamp system is unique and very strong. I like that you use a foot pedal to lock in the clamp, it frees your hands to line a part up while you apply the foot pedal to lock it in. You have to be careful with the clamping pressure, it will literally break things if you clamp too hard. And to release the clamp, it's just a flip of a switch and then you push down slightly on the foot pedal.I made a base for my Miter Saw so that the saw sits securely in the Jawhorse. Later, I plan to add extensions to the base so that the extensions can support workpieces that are longer. The Jawhorse is so handy, I find new uses for it every day. It's a tool that you will pass down to your kids because it's well built and built to last.Everything about the jawhorse is well thought out and it's made of heavy enough steel that you know it's going to last a long time. It's not a cheap sawhorse, but it does so much more than just support your work. The last feature that's pretty great is that it easily folds up to where it only takes up about a square foot of garage real estate. That's important when you don't have a lot of room, but as small as my workspace is, I rarely ever take my jawhorse down. It's a fantastic tool and I don't think anyone would regret ever getting one."},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"S***E"},"datePublished":"Reviewed in the United States on June 9, 2013","name":"5.0 out of 5 stars\n\n\n\n\n\n\n\n \n \n It Will Last Two Generations\n \n","reviewBody":"I'm a serious tool collector, I try to buy only the best tools available because I dislike tools that don't perform well, or tools that are substandard and fall apart prematurely.The Rockwell Jawhorse-Sheet Master is an excellent tool that could last years and years. This 3 legged vice is very heavy duty and is built solid, Very solid.Like me, you may have some issues with the orange slide when you first received yours. My slide was stiff and hard to move, it didn't glide back and forth smoothly as it should have. What I did was slide the orange slide back and forth 20 or 30 times and then removed the slide. What I found was several areas of the black painted frame had orange paint rubbed off onto it from the orange slide. I found orange paint on the top and sides of the black frame. I concluded that these areas of friction either needed a dry lubricant or some work with a file to take down any high spots. A chisel and mallet here, a file there, some dry lubricant here and there and now the slide only has resistance from the two imbedded ball bearings and it glides back and forth with ease. Very Nice!The Jawhorse Slide probably should have come in perfect condition but nothing does these days, and the extra effort paid off. It took 20 minutes and was time well spent. Rockwell made an excellent tool with the Jawhorse Sheetmaster. It is solid and will last a lifetime, or more.I added the welding accessory because I wanted the 2 heavy duty metal jaws for when I'm doing metal work or when I need to hold odd shaped items. I'm very pleased with this item also. It's also very well built."},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"M***."},"datePublished":"Reviewed in Germany on December 11, 2018","name":"\n\n\n\n\n\n\n\n \n Einfach nur genial!\n \n \n","reviewBody":"Servus zusammen,ich weiß überhaupt nicht warum dieses Gerät oder besser die Art, hier in Mitteleuropa fast gänzlich unbekannt ist.Ich bin durch einen Megazufall darauf gestoßen.In einem Beitrag von April Wilkerson dachte ich mir, WTF, was ist das da?In der Liste Ihrer Werkzeuge stand dann JawHorse. Was zum Teufel ist ein JawHorse!?!Ich kann sagen, ein einfaches und wirklich geniales Teil.Ich habe darauf geachtet dass ich Werkstücke von mehr als 1200mm einspannen konnte, ja und Zack, da habe ich mir das Dingens hier bestellt.Egal was, drauflegen, einspannen (der Druck ist hervorragend einstellbar- ich spanne u.a. 10mm Gipsfaserplatten ein) und loslegen.Der Stand des Bocks inkl. des Materials ist einfach Mega!Fazit:Jeder der Plattenwerkstoffe oder Türen bzw. Fenster aufarbeitet bzw. bearbeitet sollte sich sowas hier anschaffen!Wenn möglich noch mehr Sterne!Vielen Dank an April!Beste Grüße"},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"H***3"},"datePublished":"Reviewed in Canada on March 12, 2013","name":"\n\n\n\n\n\n\n\n \n \n Rockwell Jaw Horse\n \n","reviewBody":"Arrived very promptly impressed with the delivery service.As mentioned in other reviews it is a little on the heavy side, but this is due to the outstanding construction. It truly is built to last.Typical man I didnt bother with the instructions to put it up and took a while to figure it out. It requires turning on its back and getting the legs and clamp system opened in the correct order. If you have a back injury or mobility issues this is not something you will want to be putting up and down on a regular basis. But the footprint isnt too large so could be left up for the home DIY ehthusiast with enough space.Folding it up requires it to be flipped over again and I have noticed that when you do start to turn it over, and put pressure on any of the legs to act as the pivot, they are prone to start to fold up. It is essential that all safety clips are checked to be firmly seated before you start to roll it over.Due to its weight and shape it will soon trap your hand or collapse in a heap if you dont follow the instructions carefully.But it does exactly what it says on the box. 10/10 for design and construction very impressed indeed."},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"J***K"},"datePublished":"Reviewed in Canada on June 19, 2012","name":"\n\n\n\n\n\n\n\n \n \n Solo Mate\n \n","reviewBody":"The Rockwell RK9002 48-Inch JawHorse Sheetmaster is the ideal partner for the solo handyman. It extends to hold a 4x8 ft. plywood sheet, and comes with a clamp to extend the support surface using 2 by 4's. It is robust and is not made out of cheap stamped metal. The 3-legged system prevents tipping. In addition it can be easily folded up and comes equipped with built-in wheels. It is worth the investment. There are accessories available for clamping chainsaws, mitre saws and rollers. You won't be disappointed with this as your work project partner!"},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"4.0"},"author":{"@type":"Person","name":"C***S"},"datePublished":"Reviewed in Canada on April 17, 2012","name":"\n\n\n\n\n\n\n\n \n \n Amazing!\n \n","reviewBody":"Mine arrived yesterday. Only had a chance to test it, but this thing is amazing!I have seldom seen such a well thought out, designed, engineered and executed piece of machinery. Very sturdy, ingenious way it folds for storage.Only giving it 4 stars for now until I get a chance to do some real work with it, but I'm sure it's deserving.Another amazing thing is, it came from Quebec to Alberta via Canada Post in 6 days, free shipping, and no GST! You can't even get regular mail that fast! And no GST?! Is Quebec a different country or something??"},{"@type":"Review","reviewRating":{"@type":"Rating","ratingValue":"5.0"},"author":{"@type":"Person","name":"F***I"},"datePublished":"Reviewed in Canada on March 30, 2014","name":"\n\n\n\n\n\n\n\n \n \n Must have\n \n","reviewBody":"Rockwell builds an excellent sawhorseBecause of its innovative idea and groundbreaking technology the competition was sure to follow sure there are cheaper versions. But if you want the best you'll have to go with the original Rockwell this sawhorse is very strong and sturdy the only problem I have with it is the locking nut it's made of plastic. What the hell were they thinking? everything is heavy-duty except for the back leg locking nut it's made of plastic and of course mine broke but you can still lock it is not as easy. Rockwell put a steal one back there that's what I would say to them.You got heavy-duty sawhorse here that every one is copying put a steel locking nut on the back leg."}],"aggregateRating":{"@type":"AggregateRating","ratingValue":4.875,"bestRating":5,"ratingCount":8}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What are the differences between the K9000 and K9002, other than 36\" and 48\" holding capacity. Im on the fence about buying one or the other. \n*UPDATED*\n27MAY2013\nThank you all that replied.... In summary, the ONLY difference is 36\" or 48\" holding capacity. \nCheers.","acceptedAnswer":{"@type":"Answer","text":"If you plan on using it for cutting large pieces the 48 is perfect. But I use it for a lot of different stuff and for the extra bucks for the 48 I felt it will be more versatile if I need it. Its like you said they're the same except for the 48 vs 36 ."}},{"@type":"Question","name":"Does the clamp swivel to hold items like a fence post or a door upright while working on it, or do the edges of the clamp extend far enough sideways?","acceptedAnswer":{"@type":"Answer","text":"The edges extend about 2 inches only. In my opinion, you would be better off getting the Jawstand XP, RK9034. It is an adjustable stand for cutting/working on longer pieces of work or it adjust vertically and can be used to hold something in place while you attach it etc. Basically its like having a second set of hands to help you but doesn't argue with you or tell you to hurry because they're getting tired. Highly recommend this piece of equipment. Good luck."}},{"@type":"Question","name":"I have a portable job site Dewalt table saw...will I be able to toss it up on the Jawhorse in place of buying a table saw stand?","acceptedAnswer":{"@type":"Answer","text":"Yes, you can put your table saw in the Jawhorse, but you'll need to secure the saw to a piece of plywood. One reviewer mentioned using 1/2\" stock, but I would suggest using a piece of 3/4\" plywood since it will be a heavier and a more stable platform for your saw. Either way, you shouldn't encounter any problems using the Jawhorse as table for your saw. Once your saw is mounted, push and pull on the plywood to make certain it is secure and there's no slop or movement. Let me know how it turns out for you."}},{"@type":"Question","name":"will the log/chainsaw clamp fit on the sheetmaster?","acceptedAnswer":{"@type":"Answer","text":"I just spoke with customer support (I had the same question), and they said that the basic physical design is the same, so all Jawhorse accessories will fit the Sheetmaster. (Saves everyone else the call. :)"}}]}]}