Question 1

What is the distance between the centerline of the hold downs and how much additional space is there to the edge of the hold downs?

Accepted Answer

I assume you are referring to the clamps that hold the aux. table to your drill press table. The clamps are angled with a long arm 4" from the center of the hold down screw and a short arm 1" from center. The hold down screw should give you a little more than 2" travel to tighten the aux table to your drill press.
There are no hold down clamps for the table surface that come with this unit. There are two T tracks on either side, but standard T track hold downs do not provide very much versatility when clamping different pieces to the table. There are 1 or 2 larger clamps I have found that should work, but they run more than $40.
Also be aware that the T nuts that the hold screw downs into on the underside of the aux table must be removed and glued and screwed back in place, best with epoxy, to keep them pulling out of the particle board when over tightened.

Question 2

How far isback of table to center of hole on table?

Accepted Answer

The rear edge of the table is 4 inches from the center of the hole.  With the fence in place, the hole center is 3 inches from the fence, if aligned at the edge of the table.  The hole is also 12 inches from the table side edges.

Question 3

Does this come with hold down clamps for the t-tracks?  If not, what is recommended? thx

Accepted Answer

No

Question 4

How does this drill fence mount to the wren drill press table

Accepted Answer

It does, but there is a big "BUT".    The table mounts to the drill press table via two clamps that attach to the bottom.  Unfortunately, this clamping mechanism is not very stable.  It easily comes loose.  In my case, I purchase 4 screw fasteners, moved the attachment point to match the slots on the drill press table and then attached the table to the drill press table.  Now it is rock solid.  The fence is good quality, but with a 12 " drill press the mounting was problematic.  Once I made the modifications, all is good!

ASIN	B07KL1HVZF
ASIN	B07KL1HVZF
Base Type	Leg
Best Sellers Rank	#148,957 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #65 in Power Tool Stands
Brand Name	WEN
Color	Metallic
Customer Reviews	4.4 4.4 out of 5 stars (1,577)
Customer reviews	4.4 4.4 out of 5 stars (1,577)
Date First Available	16 November 2018
EU Spare Part Availability Duration	2 Years
Global Trade Identification Number	00044459461258
Included Components	Drill Press Table
Item Dimensions D x W x H	30.2D x 60.6W x 2.5H centimeters
Item Type Name	WEN DPA2412T 24 in. x 12 in. Drill Press Table
Item Weight	10.5 Pounds
Item model number	DPA2412T
Manufacturer	WEN
Manufacturer	WEN
Manufacturer Part Number	DPA2412T
Material Type	Wood with Metallic Components
Minimum Height	1 Inches
Model Number	DPA2412T
Number of Items	1
Product Dimensions	30.18 x 60.66 x 2.54 cm; 4.76 kg
UPC	044459461258
Unit Count	1 Count

WEN DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

Details

Details

Description

Specifications

Common Questions