24-inch 3 Color Levels LED Under Cabinet Lighting, Hardwired or Plugged-in, Selectable White 2700K/3000K/4000K, Dimmable, Bronze Finished, IN-0210-3-BZ

I bought one of these because of the hardwire install capabilities to switch out some under cabinet kitchen fluorescent tubes.Initially I bought one to try it out. No point in buying all initially - in case I have to return them.Based on the install I did the pros of this light are:* light looks very nice and is slim.* plenty of knockouts - accommodates pretty much any power feed locations.* easy testing - just take it out of the box and use the supplied power cord* quick connects for wiring - I hate the "wire hats"* color switch was not a problem to install back on.* mounting screws screw into enclosure - meaning, you screw them in a little bit and they stay in place while trying to align the light* cover for mounting holes.The cons are:* opening of the main compartment took a some prying to open* closing the main compartment once mounted was hard. The cutout in the panel did not seem to align perfectly with the switch. I had to use a spudger to pry it into the correct position for the panel to close. Annoying if you have to twist yourself underneath it to sort it out. Taking one star off for this.* Needs an assortment of tools - two different phillips heads,* no replacement screws for panel - if they fall into a counter crack while trying to close the panel, you are screwed. I had a 3rd mounting screw.Besides the one time pains of the install - see cons - I figured that the light otherwise is close to perfect. I ordered replacements for the rest of our kitchen under cabinet lights. Will update review as needed.

The fixture seems fine. Functions as it should BUT it is not made to be wired in. In effect you must plug it into an outlet or into an adjacent light. That would be bad enough, but it gets worse. The box has many “knockouts” to pass house wiring through the wall of the fixture, and it comes with a fitting for conduit. But the knockouts are fake! With fake little welds to fool the eye. You are very likely to distort and damage the thin-walked fixture as you attempt to pry one out. You may even damage the thin tools you will likely to resort to in your struggle. In the end, a drill is the only tool that works. But that leaves a rough hole that is hard to deburr on the inside. Oddly, the fixture includes every other feature necessary for a proper installation. How much could they possibly have saved with phony knockouts??? The whole situation makes my strongly doubt the UL certification and therefore the safety of object. It also makes me resent the price. I paid not to have my time wasted, and to have a product certified to fail safely. That isn’t what I got.

I like the fact it is easily mountable w/o taking it apart (2 screws go all the way through the fully-assembled unit) and it can be direct-wired and mounted nearly flush against the back wall. Also the light is nicely diffuse--you can't see individual LED cells. Exterior build-quality is also good with no rough edges or paint runs. I also like the fact the hole in the back for direct wiring is in the middle of the unit, so you can prewire the wall for the wire to come out in the middle of the upper cabinets, and be assured the light will be in the right place. I've bought these 3 Color Levels Dimmable LED Under Cabinet Lights three times now, and love them. **And their customer service is beyond fantastic.** I had a tiny irrelevant issue and they insisted on fixing it at their expense - I wish all Amazon sellers were this good.

Update:Third light received. Also in a taped up box, but all of the parts were there and in one piece. Done, at last. Too much work!!I’m on my second light...first one came in a taped up box and was dead! Second one also came in a taped up box (a bad sign—a return?) Plastic housing is cracked, power cord missing, came without ANY screws, and it’s working for now, but I’m skeptical. But like so many others, I had hired a guy to install these...now what?? I can’t return it because I had ordered the same fixture in two other sizes and they need to match. Very disappointed. The lights, although adjustable in “tint,” doesn’t really change enough so I think we will need a dimmer, too. Do yourself a favor and don’t do it!

Very easy to install. Two screws that mount vertically through the unit. Was so easy - this is a 24 inch model, so had a space of 32 inches to install it in so ( 32 - 24 = 8, and 8/2 = 4) so just measured 4 inches from the edge and it was perfectly centered above my sink. Then just hand screwed the screws in to secure it and lock it down. I chose to hardwire the unit in using and electrical cord which plugs into a socket above my microwave. Was able to do the wiring with drilling just one vertical hole above my the cabinet above my microwave and run the electrical cord above the cabinets below the ceiling ( a small space). Also, used a 3 prong cord so it is grounded. The unit comes with quick connectors so you can insert the wire in them- no need for wire nuts - for a secure connection. I tried the GetInLight Swivel and Dimmable LED Under Cabinet Light...... but returned it. Was too long for the application and the swivel did not add any extra benefit. Also, installation for the swivel model was much more difficult because the mounting system was horribly designed. I like that this one has Low/Hi setting and three different light brightnesses (6 settings overall). I am glad I chose this over the swivel one. This one is very low profile so you cannot even see it- only see the light.

We had 4 under-cabinet Fluorescent lights & bulbs are getting hard to source. Doing kitchen reno so decided to replace with LED. Wanted ones we could hard-wire in & found these! They are perfect!!! Just remove old fixture, insert wiring from wall as per very good instructions included, & you're good to go. These fixtures are so light that you could actually put them up with double-sided tape rather than screw into the cupboards. We have one fixture being held by Command brand strips until we get another fixture as they'll be attached to each other. Love the 3 types of lighting, plus the high/low switch. Directions are great. I'd definitely recommend this fixture to anyone. And company goes above & beyond - we needed to get another fixture in a size that was sold out on Amazon. Contacted company, they sourced it for us, & gave it for same price as Amazon. Great customer service, great product! You can't go wrong.

They are really good quality, and almost invisible once installed under my counters (not very thick at all, which is what i wanted). The fact you can adjust the light intensity is a great feature also, so your not limited to either super white bright, or yellow low light.Highly recommended, i hard wired mine in, and was super easy to do with the clip system they use for the wiring. The only real tool i used was a screw driver to mount them, and wire cutters to shorten the AC wiring to them.Worth every penny, but now we will see how long the lights last, so far i have to say they are amazing.

I really can’t say enough good things about this lamp! First, it is very easy to choose between 2700K, 3000K & 4000K temperatures using a slide switch. Also there is a “high/off/low” switch giving 300 or 150 lumens. Finally, you can just plug it in with the supplied power cord, hard wire it in using supplied accessories and you can also link it to multiple lamps using the link cord. This lamp is a brilliant design (pun intended!) and very highly recommended. The attached photo shows the lamp mounted behind our table, set on high, 2700K for warm accent light!

My existing undercabinet fluorescent died and couldn't find a direct replacement. So this is a natural. Good quality. Light but not flimsy. Adjustable color temperature is useful to match the other existing fluorescent. Mine is hard wire but can see the plug in option being useful for some. Daisy chain option can also come in handy if needed. Given it is LED, should last a long time. Recommended.

Kitchen reno, under cabinet lighting was paramount. Came across this product on a YouTube video, the individual was a contractor and was installing lighting under his cabinets. I had spent months sourcing out a brushed nickel, low profile 1"x 4' long, temperature options, hardwired, reasonably priced light. This individual was very specific about the excellent quality of this product. I ordered this product, received it in record time, installed it (very straight forward), this light is everything I wanted and more. Friends and neighbours that are installing or considering under cabinet lighting will not purchase any other product except this one. Extremely "high end" look.