Motorcycle Oil Cooler Cooling Radiator Engine Kit Universal for CRF XR KLX 50 70 90 110 125 140cc SSR Taotao Coolster Kayo Apollo Dirt Pit Bike ATV Red

Great product and not hard to install. Put it on my BD125-11.

The kit comes with 3 different mount mounting options. I choose to mount it to the intake 90 pipe since I didn't want to bolt it to the head and I my model year didn't have a way to mount it below the tank. My model has an ignition key right below the tank. The cam plate and gasket fit my CRF70 just fine. (actually 88cc with big bore kit) IMPORTANT: When I got the kit I noticed that the radiator had the oil line in/out and mount holes on the same side which meant that I would have to bolt the rad upside down. If I did this I would only be using 1/4 of the rads cooling surface area. This was at first disappointing. I have seen many other people mount these with the oil lines on the bottom. This is wrong! But guess what I noticed that the rad's cage has 4 bolts sandwiching it together and the cage looked reversible so I took it apart, flipped the rad so the mounts were on the bottom and the oil lines were on top. No where did I read that you could do this so I am sharing here and that's the main reason I am leaving a review. After the install I had to top up the oil a little. The oil lines must not be overtightened. Besides its low pressure. Its not like they are hydraulic lines. The oil lines were a little challenging to route and connect because they are ridged and the heads don't swivel so take you time and find the best orientation. After running for a bit I checked the temperatures and the rad was reading 109 degrees at the surface. That is a good sign. It will cool when your ride. Also there were no oil leaks anywhere. Last thing I have the 88cc big bore kit with the high flow oil pump and widened oil port. This oil cooler may work fine without the high flow pump mods but I would consider the high flow oil kit too because of the extra flow that may be required to pump through the oil cooler. Do your research on how to add that kit to your project.

Easy set up and it works great. I did look online for a proper set up through and I recommend doing that.

So so good got an hour on it no leaks for an Apollo thunder 150 you will need a stack of washers or shorter bolts to mount on the factory bracket. But it works. wish I had a battery in mine so I could run a fan on it. The engine is a yx140. I didnt have to use the supplied oil hose plate,as my engine had one that was capped off. It was cheap and had slight bend in one of the fins but no leaks.

Works great. Was easy to install. Took about 30min. I Have ran it over 100 miles so far and no leaks at all. Comes with many mounting options. I wanted to mount it up front but I have no room up there. I was able to mount it on the side shown on picture. It still gets plenty of air over there. Good quality for the price. This oil cooler is actually bigger than the one on my 4L V6 truck. I measured temperature with a infrared temp Gauge and there is between 10-20c drop in temperature. This will allow the oil to last longer and my engine too. You can feel how hot the oil goes in on one side and Luke warm coming out the other. Comes with lots of brackets, bolts and washers. I save the extra parts for future projects. The cooler can be flipped around so the mounting can be on the top or bottom. Easy to know how much more oil is needed, just fill the cooler up with oil before install. Good purchase. Love it! And it makes my bike look cooler.