2 for Chamberlain LiftMaster Craftsman Garage Door Opener Remote 893LM 893Max 971LM Universal

Extremely easy to program and works flawlessly with my newer Liftmaster MyQ garage door opener. I needed a couple of extra garage door openers, and based on the amount of quality reviews for this product, I decided to give these a shot. I programmed both remotes in less than a minute. I have the newer Liftmaster MyQ opener with the yellow "learn" button and the newest security protocols. For those that don't already know, many of these newer openers have the hard-wired wall-mounted openers with the flap that lifts up to expose several other buttons. I had used the "learn" button on these pads to program the WIFI for the MyQ app on my smartphone, but never got this same "learn" button to pair any remotes before...I had always climbed a ladder and pressed the button on the back of the opener. I recently discovered, after watching a demo video, that in order to pair an additional remote to the opener, you have to push the "learn" button on the wall-mounted opener 2 times...not just once. So, to program these remotes, just do this:1) Press and hold button 2 & 3 (the smaller ones) at the same time on the new remote until the LED light stays on, then release the buttons2) I have the newest yellow "learn" button on the back of the garage door opener, so I pressed the button I wanted to program which was #1 (the big button) 1 time (as indicated on their included color coded "learn" button cheat sheet), then press any other button (#2 or #3 in my case) to lock in the code.3) Open the flap on your wall-mounted garage door opener and press the "learn" button twice.4) Press the button you just programmed on the new remote (for me it was the big button) and the opener will blink (acknowledging it has received the code).That's it. Now press the remote button again and it will close or open the door and you are done. If you want to program buttons 2 or 3 to another garage door, just start the process over and then press button 2 or 3 the corresponding # of pushes to match the "learn" button on that opener. Lock in the code by pressing any other button and pair using the steps 3 & 4 above. Hope this review helps!

I bought this 2-pack in January for my LiftMaster garage door and it worked right out of the box! Programming took less than 2 minutes — just followed the instructions and synced both remotes without any issues.The build quality feels solid, and the signal range is great — I can open the garage from halfway down the block. The clips are strong and hold securely on the car visor. I also appreciate having a backup remote, which is super handy.This is a great value compared to buying a single remote from the original brand. If you have a compatible Chamberlain, LiftMaster, or Craftsman opener, I highly recommend it!

I ordered it yesterday and received it today. I followed the instructions, which are written clearly with pictures. I made it learn from the garage opener. I finished setting up the two controllers in under 5 minutes. The universal ones need one more step to set up, but it is easy if you follow the menu step by step. The good thing is that, with about 10 dollars, you can control as many as six garage doors, if you need to do so. Make your garage great again!

Very easy to program and does the job. A little flimsy but what you would expect for the cost.

Why did you pick this product vs others?:I wanted it to be a different color than the Standard heard from the FactoryConnectivity:It was very easy toReplacement value:It was very low cost overallQuality:There’s good as sturdy as the originalFunctionality:It worked great and it was easy to programDurability:Good strong plastic holds up wellFit:It worked great and worked perfectly with my model

Why did you pick this product vs others?:Reviews regarding ease of use Works well:So easy, I set up 4 in less than 5 minutes. Also had assumed my old one would need to be reprogrammed afterwards but it did not - so now I have 5 working remotes. One for each driver in the family plus an extra . All for $24… great !!!

Works perfectly! I have an older Liftmaster with a “brown” learning button (see photo). If you also have brown, follow the instructions for Purple! I was able to get them both programmed in about 30 seconds once I realized “brown” is Purple not “orange” as I assumed from the instructions.

I can’t believe these remotes are only $12 for a two pack. The button of my original Lift Master remote totally busted and I needed a replacement. These look about the same size as my original, only more streamlined and with 2 additional buttons. I decided to go ahead buy these based on the positive reviews and the crazy low price. I received them right away thanks to Prime and the programming was super easy. I had both of them paired to my garage door opener in less than a minute by following the instruction sheet that came with them. They work as good as the original and I have been using it every day multiple times a day for over a month. I will update in the future if anything goes wrong but as of now, I’m extremely pleased with this purchase.