Govee WiFi Water Sensor 2 Pack, Smart Water Leak Detector, 100dB Adjustable Alarm Suit for Home and Basement, Water Leak Alert with Email & APP Push (Only Support 2.4G Wi-Fi)

There are several reviews that are negatively rating the company. They also stated that the product does not working on eero network. 1. Company Customer Service: the company is very prompt with responding to questions. Furthermore, I had a Govee access gateway go defective and the company was prompt with replacing the item. We went through all the typical troubleshooting steps. 2. This product DOES WORK WITH EERO. Somebody made a comment that it does not work on 5 or 6 gHz, but only 2.4 gHz. That much is true. All you have to do is temporarily disable your Eero 5-6 gHz before configring your gateway. 3. Very loud siren. It will wake you from any deep sleep.

I have been struggling with an undiagnosed and intermittent leak from my dishwasher. We are leaving for vacation and I was stressed. What if?! I found this Govee Wifi Water Detector and thought I would give it a try. Installation and Connecting to the Hub: No brainer. Similar to other connected home devices so the process should be familiar to you. Don't over think it and it works great. I downloaded the Govee Home app to my Pixel 6 and it worked as expected. Relatively intuitive. I have no issues with the interface nor the included printed instructions. Functionality: I needed to KNOW that these worked (I got two) so I tested both of them. I even took my phone off of my home wifi network when I tested the alerts. I put a small amount of water under the probes and an alarm sounded. Instantaneously I received an alert on my phone via the mobile network. If I am away from home, good to go! Just don't forget to leave a key for your friend to get in and address the water issue. The audible alarm is plenty loud at the high setting (default). Leave it there. Shuts off temporarily when the button on the face of the device is pushed. Remove it from the water source and dry and no more alarm. Proximity to the hub seems very reasonable. I plugged the hub in closer to my router and there are at least four walls and a floor between the hub and one of the devices. No issue. Price: Well worth it. It is going to cost me several hundred to repair the few flooring planks so this is much cheaper. Things to Consider 1. Get the wifi version with the hub. What is the point if you are not home when the washer hose breaks? 2. To my knowledge this does not integrate with Google Home or Alexa. These connected home devices should really be universal in their integration with at least those platforms. 3. My purchase had two leak detecting units only identifed by their model number and four more digits. I triggered each one individually and saw which was which by the notification. Small inconvenience and easily solved. I renamed them for their location. Overall, super happy.

Price has nearly doubled on both my preferred brands of leak sensors so upon deciding to add additional sensors I decided to try Govee because I very much like the idea of having an audible alarm in addition to text, they are affordable (I need 10!) and I’m having a 4+ star experience with the Govee temperature sensors. The water sensors seem to work so far but not all is great. - documentation for setting up is okay but could be better. Documentation for integration into smart(ish) home network is virtually non-existent. - I have no way of measuring decibels but the alarms sound isn’t very loud and unlikely to hear it from across the house or from a different level of the house. - I really like my new mesh WI-FI that automatically figures out whether to connect via 2.4 vs 5ghz. However the Govee gateway required with these sensors wouldn’t connect so I needed to dumb down my new network to split the 5 and 2.4 ghz networks to get it to connect. At some point will configure an old router to act as a 2.4ghz access point strictly for these sensors but what a pain…. - as I mentioned I have numerous sensors to configure but sitting here with 10 of them stacked in front of me (because to connect to gateway you need physical access to the gateway) and there is no convenient way to know which sensor corresponds to which device entry in the app. Sure, not particularly difficult to resolve but it could have been much better. - sitting here watching the gateway it seems to occasionally lose connection then regain. It is 10ft away from the router and microwave oven and other typical interferences not applicable. I haven’t lowered rating because of this but is something I’ll keep an eye on before trusting these. I’m starting with 4 star but wouldn’t take much to drop it to 3.

I would definitely recommend and buy again if in the same position. Bought a set of two and then an expansive set of five for 7 total. That might seem like a lot, but isn't. One for under both bath sink cabinets; one behind both toilets; one for the kitchen sink cabinet; one for the laundry room; and finally one behind the fridge for the water line. We were finishing up a major renovation and something convinced me these might be a good idea. Think about it. How long would it leak under a sink before you would notice? Would the cabinet shelf or bottom get ruined? And behind your fridge? When would you notice that leak? So I bought 7 total. In the 4-5 years since, I have had 5 or 6 alarms. All but one was legit. The one anomaly was notifying that the battery was low. Not all leaks were just water. The first alarm - happened the first day and we were no home - was because the dryer hose had come off and was filling the room with hot moist air. It was enough to set the alarm off. And once, I had a hair spray can spring a leak under.a bathroom sink. How often does that happen? So yes, I would definitely recommend these for anyone. The faster you know about a leak, the faster you can prevent damage. The ability to get a notice on the app when not at home is a must. Alarm is loud and the app notification works well. The battery life is good. I've only replaced once recently after 4-5 years. The app tells you the battery level, so you can plan ahead and check periodically.

Seems to work well when everything is connected, but it's kind of pointless because there is no indicator when the sensor has been disconnected or if the battery is low. As a test I simply removed the batteries and in the app it still shows connected and full battery. I also put in some low batteries, it still shows full battery. A notification for when a sensor disconnects and also for low battery would be bare minimum to really be reliable. The app should also show the correct status of the sensor. Maybe this is an easy fix in firmware or the app, either way I will give a little time but if it isn't fixed within return window I will likely have to switch to a different make that has some of these basic features. Edit: Support was no help and didn't offer any solutions, they said if the it loses connection it will show disconnected in the app.. I have found this to be FALSE. I've had these in place for about two weeks now. I decided to test one and while the alarm went off I got NO notifications. Went into the app and it shows connected and full battery but no alarms. Had to unplug the hub and plug it back in to restart it, then I tested the alarm again and it showed a notification. If the hub somehow disconnects or if a sensor disconnects there is NO indication in the app of an issue. This makes the product extremely unreliable unless you someone is close by to hear the alarm.

Anyone that’s gone through water damage will tell you this is definitely worth the time and investment. Time will tell if these devices will work down the road but what I like about this product is that there are alarms on each sensor as well as an app that will trigger email notifications and app notifications. If your Wi-Fi and power is down for some reason, you still have the alarm in each individual sensor as a fallback. As others have pointed out, the initial set up can be a bit of a pain, particularly if you were on 5G so I decided to outline the steps for my process as a Verizon FiOS customer using gigabit service and 5 GHz WiFi. Fios Setup First go to the FiOS app on your iPhone or android. Depending on your app set up, click on Internet (Manage your home network)/Advanced Settings/Self Organizing Network (SON) and disable it. Once you come back out to the Prior menu screen you should see both your 2.4 GHz and 5 GHz networks. In order to set up the Govee, I temporarily disabled my 5 GHz networks to avoid any issues with the device pairing. After I was done setting up the hub and pairing all sensors, I reenabled the 5 gig service. Step-by-step setup Govee Hub Setup: Plug-in Govee hub device so buttons are on the left. Download Govee Home app. Open it and click the plus button to add a new device. Type 5040 or 5041 depending on your model. Create a Govee account with the email you want to be notified when there’s an alarm. With the hub plugged in so the buttons are on the left side, press and hold the top button for three seconds until the blue light starts blinking in a slow steady manner. Click confirm on the Govee app and type in your Wi-Fi password. That should create the Govee gateway in your list of Wi-Fi options, which you will need to select. So go to settings/ Wi-Fi and click the Govee gateway option in your list of Wi-Fi SSIDs. Once your phone connects to the Govee Gateway, go back to the Govee app and continue through any prompts. Make sure your phone is close to the Govee hub and that you’re within range of your router. When the hub is done connecting, you should automatically see the sensors that came in your kit, listed in your Govee app on your phone. From here, you can select the sensor in the app, click the gear icon in the top right corner and rename each individual device with the location where you are putting it. E.g., 5040-T67G (XXXX) can be renamed to dishwasher or washing machine, etc. Pairing Additional Govee Sensors: If you purchased additional sensors, you will need to pair those with the Govee hub individually. At least that’s how I did it so I could keep track of each sensor and rename it appropriately. To pair a new sensor, remove the battery cover from the sensor so that the device is active. With the hub plugged in so the buttons are on the left, press and hold the lower button for three seconds. It should begin to blink red and blue. At this point press and hold the sensor button for three seconds and let go. You should hear a subsequent beep from the sensor within a few seconds of letting go of the button. From here, your device should be added to the app within 30 to 60 seconds and you should be able to see the new sensor number listed the app. You may need to change screens (click on profile then click back to the home button) within the app to see the update. Follow the same steps to rename each sensor as needed. I purchased additional sensors so I needed to identify them individually and decided to use a label maker on each one so that I don’t get them mixed up. Because I had so many sensors, and could not figure out how to identify the individual sensors in the app, I was forced to trigger the alarm (by getting each sensor wet momentarily). This allowed me to see which sensor in the app was triggered and from there I was able to rename it. It also allowed me to test the function of each sensor. Hope this helps those of you in my situation!

Water Sensors Review I recently purchased these water sensors that have proven to be an invaluable addition to my client’s business. These sensors are designed to alert you via push notification if a leak is detected, as well as set off a local alarm to alert anyone present of a leak. This dual alert system ensures that any potential water damage is addressed immediately, minimizing the risk of costly repairs and equipment damage. Real-World Application During a recent water leak event, the data room housing a lot of expensive equipment experienced a leak due to a conduit being flooded by landscape irrigation outside the building. To ensure my client was aware of any future flooding at the onset, as opposed to two days later, we installed these sensors as a solution for instantaneous alerts. This proactive approach has proven to be incredibly effective. Critical for Business Use For a business, knowing if there is a leak after hours is incredibly important to protect valuable equipment in their server room, including telephone equipment, surveillance equipment, networking equipment, and more. These sensors have proven immensely valuable, as they alerted the owner to the presence of a leak only three days after installation. They were able to promptly address the issue while being located 40 miles away from the office. Reliability and Efficiency These water sensors are reliable, energy-efficient, and robust. Their small form factor makes them non-intrusive, allowing them to be placed discreetly in critical areas without taking up much space. The peace of mind they provide is immense, knowing that any potential water damage will be detected and addressed immediately. Conclusion Overall, I couldn’t be happier with this purchase. These water sensors have proven to be a reliable and effective solution for detecting leaks and preventing water damage. Their ability to provide instantaneous alerts, both locally and remotely, makes them an essential tool for any home or business looking to protect their valuable equipment or property. I highly recommend these sensors to anyone in need of a dependable and efficient water leak detection system.

Overall, I liked this product. I also have a Govee wifi meat thermometer and Bluetooth thermometer/hygrometer, and I really like both. These sensors do work well, and they are loud. In the time that I used these, I did have several alerts when my basement was leaking during heavy storms. I received near instant notifications on my phone. The reason I no longer have these is the unreliability of the gateway. The first one I had would randomly disconnect from the network and the only way to get it working again was to re-add it like a new gateway. It's a quick process, but not something you should have to do repetitively. Kudos to Govee customer service, who sent me a replacement very quickly. Unfortunately, the second gateway does the same thing. It will work great for weeks, or even months, and then randomly disconnect. My biggest problem with this is that there's no alert when it does disconnect. The only way you know is if you pull up the sensors in the app, or happen to walk by the gateway with the flashing blue light. I finally got frustrated enough to order a competing product, with an Ethernet port on the gateway. I have lots of wifi devices in my home and have never had one that cannot reconnect after restarting. My router is high end and modern. The Govee gateway was plugged into the sine wave UPS I use for my core network equipment and it never lost power or experienced a power surge. It simply dropped connection and forgot the network credentials. It basically reset itself to factory settings. Otherwise, again, the sensors work great on their own, as audible alarms. When the gateway works, the notifications are quick and reliable. Since I bought a whole new system with its own sensors, I simply didn't need these any longer.