Trend Universal Plunge Router Sub-Base, 150mm, Enhanced Compatibility for 1/4 Inch Plunge Routers, UNIBASE/150

la compre para un Router triton, ya que pone universal , pero es solo para unas marcas en concreto, leer bien las marcas para las que vale, para la triton tiene una especifica esta no vale

article que j'ai du malheureusement renvoyer. le détail des spécifications et compatibilité est plus qu'incomplet.

Sofort met der andere Federfräser an die arbeidt einer anfullung bei mein Bosch geräten als zweite satz um nicht mehr zu weckseln

You MUST use the nuts and bolts supplied with the sub-base. It is possible to pull the inserts out of the plastic if you try and use the screws supplied with the template guide bush as they are a different size (despite both being provided by Trend in my case). Remove the existing sub-base from the router. Remove the plastic shield by gently pinching/prising with a flat screwdriver (Bosch POF1400) Mount the guide rod onto the router collet. Mount the Dummy guide bush to the new sub-base and slide onto the guide rod. Adjust until the new sub-base just touches the mounting points. Rotate until the router mounting holes align with corresponding holes in the sub-base. Bolt into place using nuts, washers and bolts provided (the box has a table showing which bolts go with which router). Remove guide rod and guide bush; replace with the real thing and away you go. In use you must make good attention to holding the base flat to the work piece otherwise there is a slight tendency for the many holes to snag.

S'ajuste à la perfection , résultat impeccable