WHOLEVSmall HDMI Monitor Mini CCTV Monitor 10.1" TFT LCD HD Screen 1280x800 with VGA/AV/HDMI/BNC/Audio Input Built-in Speaker for Office/Store/House Security Camera Raspberry Pi PC DVR Remote

I'm using this monitor as part of my system for online teaching on Zoom. It's a great size for monitoring the output of my ATEM mini. It's important that I can view exactly what pupils see online and the screen is the perfect size for that. the image is nice and sharp and I found it simple to get set up. Can't comment on the stand that comes with it as I haven't used it (the photo shows that I have it mounted to a clamp arm so it was handy that it had the correct screw connector for that . Also handy was the choice of connectors that came supplied (I'm using HDMI).

Using this as a monitor for my camera and raspberry pi. Resolution is pretty good and the remote control works well...

Due to limited deskspace as I have a 3440x1440 display already and limited need but still a need for a second monitor, I figured I'd purchase this little monitor, I picked the rimless glass version and have applied my own anti-glare film to the display and it matches nicely. Much to my surprise the unit itself looks better in person than it does in the pictures. I have quite a bit of technical knowledge when it comes to monitors and graphics work so I put this little display through my usual litany of tests.::::[ SETUP ]::::Setup wasn't great to be honest, over HDMI it was detected as a 1024x600 display, and I could tell that it was not at native resolution. I created a custom resolution of 1280x800 using CVT, with a refresh rate of 72hz, which is exactly half that of my primary monitor at 144hz to avoid stuttering. I had to turn the display off and back on again and I could tell it was now displaying at the correct resolution for the panel and the image was sharp. The monitor accepts the signal and so I decided to see how far I could "overclock" the display, it seems to go to 75hz happily with no complaints but anything above that does not work, the usual tricks to squeez out a few more hz did nothing to allow it to go above 75hz. So yes, this display does overclock to 75hz, if you are using a 144hz display then you should set the refresh rate to 72hz, this will avoid any juddering issues Windows may have when using displays with differing refresh rates. There was no frameskipping at any refresh rate that worked.Next I also found that I had to set the colour mode to "limited" rather than full as the display was crushing blacks and whites, the panel is 8 Bit and once I set the colour to limited I found the display to be surprisingly accurate.::::[ DISPLAY ]::::The first thing I noticed was that the edges of the display "hid" behind the glass front unless looking directly at it from the front, A strange design flaw but on a panel this small and which will likely see use as a CCTV or secondary display it is not an issue, the display is set back from the glass by a few mm.The second thing I noticed was that sadly, this is a TN panel, and not an IPS panel as advertised, now it is a "good" TN panel in that it has wide viewing angles and due to it's size you don't see any colour shifting, so unless you know what you are looking for or are looking at it from extreme angles it's unlikely you'd notice, the LAGOM viewing angle test doesn't even give away that it is a TN panel.Colours are very uniform for such a display, even a dark grey (which usually reveals ant flaws in a display) background with flat colours being displayed surprisingly vibrant for such a display.Sadly there doesn't seem to be a way to actually control the backlight, with both brightness and contrast only affecting the image, without adjusting the backlight brightness, so values of 50 for Brightness, 50 for Contrast and 50 for Saturation will be the only "correct" or native values. There was also no way to control or adjust colours, meaning I'll have to do that from my graphics card drivers as I prefer a "warm" tone to my display.::::[ FINAL THOUGHTS ]::::For a second monitor, where desk space is limited or where you don't want too much 'screen' in your face at once this more than fits the bill. I personally use it for displaying reference images when working on 3D models and for E-Mail, Facebook or for watching movies "in the background" so I don't get distracted from what I am doing on my primary monitor. I did find the text to be a little small, in a perfect world I'd want to go from 10" to maybe 12 or 13" but I'm happy with my purchase.

I wanted a screen for the BlackMagic ATEM Mini to utilise the HDMI output. The ATEM requires monitor resolution to be minimum of 1366x768 but sadly this screen is XVGA, i.e. 1024x768. But ... If you change the ATEM settings to 1080 60hz you can display on this screen perfectly. Quality is good for price esp. If you put saturation on full.

I was looking for a monitor between 10 and 12 inches in size to run my mini home server on so I wouldn’t need to keep switching sources on one of my main monitors. I was surprised by how few there actually was, so I really deeply looked around the web to find the best option for my needs. In the end I decided to buy the WHOLEV 10.1 inch monitor. I thought it would do what I intended it to fairly easily as I didn’t need anything flash.I was excited to open up the box to try out my new monitor. The first thing I did was plug my Chromecast into the HTMI port to test out it’s picture quality and at first look it looked great, least good enough for my needs. After a while I plugged it into my mini home server, which would be it’s initial purpose, and everything seemed off from that point. I shamefully had to return the monitor.I had so many issues with the monitor I have decided to just number them below:1. I had some very noticeable LED edge light bleeding that was present on all four sides of the screen. I noticed this as soon as I started Terminal (which is normally a black screen with white text for those that do not know) in Linux. I couldn’t believe how prominent the bleeding was, I found this unacceptable.2. I don’t think the screen was installed in the device correctly as I would have to look under the top bezel to see the very top of the screen which in my case hosted the date & time and all the buttons for the computers settings.3. Viewing angles on the screen were terrible when looking above and below the monitor, from the left and right looked acceptable at best. This was a huge issue for me due to the placement of the monitor in my room.4. I tried the VGA cable provided in the box and it didn’t give me a clear picture, everything looked smudged to the right. This was fixed using my own VGA cable.5. The monitor really struggled showing black. When the screen was meant to be showing black it would end up being more purple.6. I knew the sound quality wouldn’t be that great due to the size of the product but I was expecting something better than I got. The speaker installed in this monitor is the cheapest speaker I have heard in quite a few years now.In conclusion I believe this screen was very poorly made with extremely cheap components. If you intend to use a monitor where you view a lot of dark graphic content or to run an Operating System on it, I would advise that you avoid this monitor and look elsewhere. Shamefully I couldn’t give this monitor anything better than a one star. I was only looking for something simple and half decent, and this product was far off those expectations.

I got this to use as a secondary monitor on a desk that doesn't really have room for two larger monitors and it's turned out to be ideal for having notes or videos open while I'm working or chats open while I'm gaming. The stand is easy to assemble and the face buttons and built-in menu are simple enough. The picture is very slightly on the blue side by default but nothing a little colour adjustment (in PC settings) can't fix. Built-in speaker is so-so but for a little monitor like this you shouldn't expect much; it gets the job done.As a side note, the braided HDMI cable pictured here is not the one that came with the monitor.

Got this because, whilst it's brilliant. My Sony x800m2 universal player doesn't have a display, now I can see what track numbers are playing and access dvd-audio venues, bluray audio menus etc

Bardzo słaba jakość ekranu, nie jest wart żadnych pieniędzy nie polecam

PRO+ Kompaktes 4:3 Format für unter 100 EUR+ Scharfes Bild+ FernbedienungKONTRA- Starke Invertierung bei Schrägsicht- Speaker von schlechter QualitätVerwendung findet das Display bei mir in einem Macintosh SE/30 Gehäuse.

Contrairement à l'image détaillant le contenu de la boite, l'alimentation Europe est absente.

Der Karton kommt unverschlossen und unverpackt von Amazon. Auf dem Versandweg kann sich jeder bedienen - nicht einmal ein Klebesiegel ist vorhanden. Sicher und geschützt ist was anderes. Naja, diese Kritik geht aber eher an Amazon.Das Gerät lasst sich nur mit Ausprobieren aufbauen (für jeden, der sich auch fragt, wie die Halterung am Stativ befestigt werden soll und vergeblich nach einer Anleitung oder Skizze sucht: Das Stativ auseinanderschrauben, dann über die Halterung stecken und wieder zusammenfummeln).Die Haltbarkeit: Der erste Monitor ging nach ca. 2 Stunden aus und wollte partout nicht wieder funktionieren. Strom raus (und warten), mehrfaches booten, testen an anderen Anschlüssen und Geräten: Nichts. Das Ersatzgerät funktionierte am gleichen Gerät, an dem der erste Monitor seine Funktion verweigerte, sofort.Der Preis mag gut sein, die Qualität der Verarbeitung entsprechend.Der Kundenservice reagiert schnell und freundlich. Unsere anfängliche Unzufriedenheit wurde anstandslos behoben und Fragen geklärt. Die Kommunikation geht auf Englisch etwas einfacher als auf Deutsch, jedoch sind alle E-Mails verständlich..

Buono