Thermal Pad,100x100x0.5mm Highly Efficient Thermal Conductivity 12 W/mK,Heat Resistant Silicone Thermal Pads for Electronics Laptop Heatsink CPU GPU SSD IC LED Cooler

Seems to work very well. The heatsink gets pretty hot. This combined with the heatsink, brought the temperature down 5 degrees.

THESE WORK AS GOOD IF NOT BETTER THAT GORILLA BRAND AND COST A WHOLE LOT LESS. THE ONLY ISSUE IT GET THE PLASTIC OF THE ACTUAL PAD WHICH THE TECH SUPPORT WAS NOT MUCH HELP.

Awesome job

I have bought every single one of these (difference thicknesses) and they turn out to be a bust. I hated the fact that I wasted so much time to carefully cut out every single piece just to find out the temps DID NOT improve. This isn't my first rodeo as far as replacing thermal pads and I am sure there is a reason for why they are so cheap. I installed them in my GTX 1080, GTX 1080 Ti, RTX 2070 S and RTX 3080 FE... and I DO NOT RECOMMEND them for these cards.

This thermal pad works, that is about it. If you are looking for high performance, get a Gelid or something else. Performed comparable to a stock pad on my GPU, maybe slightly better but not much.

I purchased this product mostly because I needed a 0.5mm pad. My go to brand is Frosty Thermal Pad 12.8 for the standard graphics card sizes, but they currently do not have a 0.5mm pad. My only gripe is I wish it were cheaper. I did a hacky kind of mod to a 3080 and so far the temps have been pretty good. I used this 0.5mm sheet to better meet the heatsink to plates transferring heat from plate that is affixed to the gpu itself. Then I used 1mm pads from Frosty Thermal Pads (instead of 1.5mm pads) so the total is still 1.5mm. Overall my temps on my gpu vram is stable around 86 degrees to 88. I did a similar mod with paste and it hits 84-86 degrees so for a mod with all pads I would say it's a success. Very happy this worked out in the end and I will likely get more later down the road because I highly prefer this over using paste to meet close the gap.