2-Pack 6 Pin to SATA Power Cable (SATA to 6 Pin PCIe) - 8 Inches

I used these for about a week before i was gifted a new power supply in which i didn’t need these cables anymore, so i don’t know how they do in the long term. But for the little while that I did use them, they performed perfectly! And they didn’t even catch on fire like these cables are rumored too!

Needed a cable to help power a GPU with a 6 pin and 8 pin power need. I had the 8 pin, but no 6 pin, nor a place to get it from the power supply, cable wise. I couldn't find any 8 to 6 pin cables that would arrive quickly. I did have extra SSD cables, and this did the trick. Good result from these to solve a frustrating problem!

So I ordered the wrong one, I thought this was a 2x sata to pcie 6-pin, but I overlooked it. Good thing my PC doesn’t care anyways. It’s just an easy to use adapter, however there are only 5 pins going into the pin end, and the quality of the raw materials was questionable, with some sprew coming off the plastic ends, signifying how cheap they are making these, and how high their profit margins are. Overall, an OK adapter and good enough for crypto miners.

Don't forget this (SATA -> 6-pin) if you're installing Thunderbolt.

Bought them for my grandson they work

It's a cable, so there's not a lot to write about here but it arrived in good condition and appears well-made and worked without any hassle in my system when I installed it. It provides supplementary power to my GTX 1080 Ti which I tend to run hard doing crypto mining while the computer is idle.

This SATA-to-6 pin PCIe power adapter cable seems to be made of decent-quality materials. However, it may not be able to handle the full 75W for the PCIe 6-pin power connector spec. It uses a single SATA connector as a power source; SATA power connectors are rated for 54W max. It draws +12V and ground from 2 SATA connector pins each, using two wires to connect to 2 of the 3 PCIe connector +12V pins. The last pin is left unconnected. It also uses two wires to connect to 2 of the 3 PCIe connector ground pins, but adds a bridging wire from one of those 2 to the last ground pin. Thus, on the 6 pin connector, the 3 ground pins are wired to ground and 2 of the 3 +12V pins are wired to +12V, leaving the last +12V pin unconnected. I'm using this adapter to supply supplemental power to my motherboard rather than directly powering a graphics card, so I expect it to be sufficient for my needs.

Works for low power graphic cards. Used to install a Quadro P4000 on a PC without any native 6 pin plug. Good for small PCs with limited plugs in their power supplies.

.

Gute Qualität, schnelle Lieferung

Ce câble d'alimentation 6 broches avec connecteur SATA et fonctionne bien pour les cartes graphiques comprenant une ou deux port d alimentation la puissance supporté maximum Est de 56Watts pour ma carte graphique RTX 3050 NVIDIA Asus PHOENIX 8G V2 PEUT FONCTIONNER AVEC MAINTENANT AVEC UNE ALIMENTATION DE 180W MOI QUI EST UN VIEUX ORDINATEUR MA CARTE GRAPHIQUE FONCTIONNE NE POUVAIT CHANGER D' ALIMENTATION CE CONNECTEUR MA SAUVER GRÂCE AU CONNECTEUR SATA et pouvoir changer de carte graphique sans le souci de l' alimentation externe

Comes in handy on modern PSUs with too few SATA power connectors

I bought these to support a replacement graphics card in my Dell Optiplex 5090 which does not have a 6 pin graphics connection on its 250W PSU. I found them very useful for trying out the graphics card, but please be warned that the SATA connection is limited to 54 watts maximum, not the 75W the card requires. I initially ran the card using the Nvidia utility to limit the power to the card during testing, but I have now rearranged my PSU to support the card directly.