Chipstick D4 PU Flooring Glue 1kg, 1 Bottle

This glue is excellent for securing squeaky flooring boards. Lift and clean the board and rafters, spread the glue liberally, and then secure down with appropriate screws (threaded all the way to the top. The glue expands like foam and grabs everything in its path. Yet, it is easy to clean off any excess that rises above the boards. Highly recommended.

A easy to use glue that really helps quite a chipboard panel floor. I used it when overlaying a poor quality chipboard floor with 18mm large chipboard floor panels and have been rewarded with a really firm quite flooring. The glue flows from the container easily and then expands and dries in about 1 hour and any excess can be removed with a good scrapper to leave a good job.

First time using this after reading recommendations. Had a number of squeaking floorboards and stairs (some really noisy) this worked brilliantly curing about 90% of the movement. Used some screws on the stair treads and now it's so quiet. Very pleased with the result.

Been a fan of PU expanding adhesives for years and this is no exceptional.Quite fluid when applied so dont expect it to fill holes like gun applied adhesives.Starts to set relatively quickly, circa 30 min with any excess foaming out of joints.A little goes a long way so no need to apply copious amounts otherwise you will be removing the excess and wasting adhesive.I never tested the strength of joints until the following day, all were perfect. Any excess foam was easily removed with a sharp chisel.Good product.

This is good stuff in terms of adhesion. It is a golden, transparent colour when applied but it dries white. The key factor with this product is that it expands as it dries and that could be exactly what you need. For exposed areas, however, where you start is not where you finish and once dry, it is quite hard work (but not impossible) to remove the surplus expanded glue. For the appropriate application, it is excellent.

Great wood glue, especially with floor boards. highly recommended.

Manufacturer wouldn't recommend it but I had a couple of ceramic floor tiles outside that had come loose, so I gently lifted them and found the tile hadn't bonded properly, the base was sound so I put a run of the product around the edge and criss crossed it over the base, replaced tile ( after cleaning) and placed a weight on top to hold it in place, and hour later the tile was solid leaving me a bit of tidying up but not difficult.Most impressed with speed and bond, and it's suitable for outdoors so win win.

Real messy to use, takes ages to expand, gets on everything if you are not careful. First time I've used expanding glue so not sure if all expanding glue is like this, but I found it a waste of money