Solsop RJ45 Crimp Tool Pass Through Cat5 Cat5e Cat6 Crimping Tool for RJ45/RJ12 Regular and End-Pass-Through connectors

I bought this because I wanted to have one that trim off cable ends in pass-through connectors.I was very disappointed when I tried my first connector. The blade that cuts off the leads does not sit flush to the front of the connector resulting that there is 0.5-1mm cabe sticking out. This make it so that the plug touch the end of the female RJ45 connector and the clip does not really snap.Another thing is that the blade that trim off the leads goes 1mm into the plastic edge right beneath where the leads go out from the connector. This make a piece of plastic bend out from the connector which just makes the above mentioned problem worse.A third problem is that the strip blade goes too far into the cable, damaging the leads.I have made hundreds of crimps with my old Knipex brand crimper, that never failed unless I screwed up and accidentally put the leads in the wrong position. When I did my first crimp with this one, it did not work. I checked with a cable tester and lead #3 was not connected properly. I re-crimped with my old one and it worked immediatley first time, like usual. I rather keep the old one and trim off the leads with a fine electronics wire cutter. I use quality brand connectors so they are following the standardized dimensions on this type of connector, so it is not the connectors that are out of standard.

Prodotto eccellente, qualità prezzo, ed arrivato in tempi rapidi...

This tool was designed by someone who actually uses this network connector crimper. This tool is, by far, an excellent buy for its features.The main features are:solidly-made, heavy gauge steel constructionaircraft-style lock nut secures the pivot pointhandles are ratcheted (ratchet release is accessible)blade guard to protect fingersouter insulation stripper for flat and round cable (blades are replaceable)crimps pass-through 6-pin and 8-pin connectorsproperly trims the wires in the crimping processcable cutter (all cutting and trimming blades are replaceable)fixed-length, wire-stop strips flat cable to the proper lengthwire colors and positions are laser-etched on the side of the crimper (EIA/TIA-568A and EIA/TIA568B)wire position 1 and wire position 8 are laser-etched at the crimper headcrimps 8-position connectors (RJ-45)crimps 6-position connectors (RJ-11, RJ-12, RJ-14, and RJ-25)handles are comfortable with stops at the top to keep the hand properly positioned during the crimping processThe tool required a slight adjustment of bottom, flat-cable stripping blade. It was slightly too high on one side, which tended to nick the insulation of the individual wires on that side. The design uses two screws for that blade to allow adjusting it to be parallel with the upper blade. The blade guard was removed, loosened the two screws holding the bottom blade, adjusted the blade, tightened the blade screws, and replaced the blade guard.The upper blade for cutting and stripping is also secured with two screws to allow adjusting it as well. This blade needed no adjustment.I am very pleased with this purchase. A well-made, comprehensive tool that works well and will last.

Boa qualidade

Doet zijn werk prima. En degelijke tang. Met de doorsteek RJ45 en deze tang heb je dadelijk controle of de volgorde van de kleuren juist zijn, waardoor je veel minder foute aansluitingen hebt.