Buyers Products B2426FSLL Long Leaf Formed Hinge Strap, Silver

The flat part of the tongue is 2.25" wide by 3.00" long. The steel is 1/4" thick. There is 3/4" between the bar around the hinge pin and the hinge pin. I drilled a hole in the flat area to receive my tow bar's connection pin. I used 2 U clamps to connect this hinge to my Artic Cat snowmobile's back handle (this should work with any snowmobile) . This hinge is perfect for my needs!.

Seemed like the cheapest option for me to make a hinge for a spare tire carrier. I was a bit worried as it would take some vertical force against the hinge, which is not exactly how it should be used. I modified the strap and welded it to some 3/16th 2x2 box steel and it's held up amazingly so far. It fully supports the weight of all the steel and a 33" spare. Took a beating on the trail and still no issues. I am pleasantly surprised!

I bought these to weld into my truck bed , to create a tilt bed. They are thick 1/4" steel. There is a stainless bolt with two flimsy plastic inner washers and a nylon locking bolt. As they come the hinge has slop, a bit of wiggle. I added two additional thick washers between the U shape and the pivot. So Bolt, U, washer, flimsy plastic, pivot, flimsy plastic, washer, U, Nylon locknut. I hope that makes sense. It took out the majority of the slop from the joint. I also greased the bolt well. For the price I think they are a decent buy. I'm happy.

Added these between two existing hinges of the same kind so I could add almost 300lb to the trailer door. Leaf vacuum. Did the job fine.

Welded on fairly easy and very strong

Very sturdy. There is some play in it. I drilled out the hinge about 1/32" and was able to use the next bigger bolt which took out most of the play and made them very smooth in use.

Very well made just what I needed in making a hitch

These are pretty nice hinges but do have quite a bit of play in the hinge bolt clearance. They are not a tight fit, have about a tenth inch of play.