OREI 1x8 HDMI Splitter 1 in 8 Out Ports with 4K@60Hz, HDCP 2.2, 3D, EDID | Support HDR function, HDMI 2.0b, STD/TV EDID control via dialing the dip switch, Support 18Gbps video bandwidth

Quick setupWorked perfectly actually this did better than what was installed 3 years ago for less than cost of 30 mins labor. Quickly separated 1080 signal from 4k and clear pictureWould consider again in future this mfg

I was tired of paying for 2 xfinity boxs , my 2 TVs are close to each other so I got the HDMI splitter and hooked the 2 TVs together with the OREI, works perfect, just needed short HDMI cable to go from cable box to the splitter, Happy!

Great product

Great product! I’ve been using it successfully since August 2022. It has worked flawlessly. Unfortunately most recently I experienced the screen fluttering and ultimately losing the ability to display media. I’m currently troubleshooting the issue and will see what I come up with. Inspire of this in still impressed by the product!

I hand only older 1x4 splitter that worked for years and stopped working. I upgraded to a 1x8 since I actually had 5 outputs. Replacing this was much harder than I thought. This one worked great. I hooked up 5 inputs with long HDMI cables (50-75 feet each). It worked just fine. All 5 TVs showed the same signal without interruption. Previous to buying this one, I bought 2 others that did not work. Unlike the others, this one had a 12W power supply (12V @ 1A). The other ones were only 5W (5V @ 1A). I suspect this contributed to the issue. With the other ones, the video would flicker or not work at all if I hooked up more than 2 inputs. With this unit, it worked flawlessly even with all 5 TVs hooked up and running. If you need a splitter and have long cables, I'd highly recommend this one!

This replaces a 1-to-4 splitter that was beginning to fail. Setup is a Roku streaming device feeding the splitter. From the splitter I have two TVs/surround receivers, plus one other TV. Over a year ago, I stopped getting audio from one of the TV/Receiver combinations. Recently, the standalone TV started flickering and finally got "no signal."Popped in the Orei splitter and everything works like it did in the old days - except maybe the picture on all TVs is brighter.

The OREI UHDS-104 1-4 HDMI splitter works just as advertised. Once the product arrived, I watched the short video on how the splitter operates then set it up quickly on my own and all was well, great picture to both outputs I happen to be using at the time. Great product and super easy to use. Would definitely recommend. Enjoy!

I so wanted them to work. I spent an hour with the first one, trying different cables, different settings, every combination of ports and settings to get a 4kx60hz signal from my PC to my monitor and TV but could get only get 2k to my monitor and no signal at all to my TV, even though I'd been able to with the Orie 2k splitter I was hoping to replace. After a couple of days and several email exchanges with Orei tech support I concluded it was defective, so requested an exchange, and also purchased new 8kx60hz 48Gbps cables. When I received the new one I initially could not get anything beyond 2k, but finally after an hour of swapping cables, outputs and settings I finally got a signal to both. I was so happy. Thinking that perhaps the original one was okay but just needed the magical combination of cables and settings I replaced the new one with it and could not get any signal to either device. When I swapped the new one back in I had the same result. I played with the configuration for a few minutes before giving up. Not certain, but I'd have to guess that somehow the order of connecting power and inputs/outputs damaged them. If so, another reason to avoid them. I'd replaced two of their 2k switches due to premature death (presumably power, though they go through a UPS/surge protector) so I know they are cheaply built. But at least when those work they work consistently.

Does what I got it for perfectly - Keeps my computer monitors alive and doesn't mess with the window positioning when I turn off a monitor.But apparently I could've just gotten a "Dummy HDMI plug" (or DisplayPort I suppose) to do the same thing. You plug it into the GPU's empty plug hole and it tells Windows that the "monitor is on and alive" so Windows doesn't do anything stupid.

Excellent. Does exactly what it's supposed to do unlike some of it's competitors.

Works perfectly... More than expected.

work with together UHD and HD TV seamless because of up scalling feature

Received the product with utmost care and appreciate the packaging thanks to the seller. The product looks genuine and tested it by connecting 3 displays at a time works as promised it duplicates the input.The product is ready to use out of box, no installation is required just plug in the power cord and done.