BestEvMod for Tesla Model Y Rear Spoiler Wings ABS for 2020-2024 Tesla Model Y Trunk Lip Tail Wing Rear Trunk Lid (OEM Spoiler, Matt Carbon Fiber)

Not difficult to install. Looks good on my model Y. Will see how it holds up over time as It's only been on for a week.Update: After about 3 months, I noticed the one side was starting to detach and slightly begin to raise. I felt that I was very thorough prepping the surface so not sure why it’s starting to detach. Not sure how difficult it will be to remove the spoiler completely and all the double stick tape and re-apply. A bit aggravated.

I applied all the measures that people here talked here, at 3PM temperature was at 78F, cleaned the car surface with alcohol wipe, applied provided adhesive promoter and waited about a minute, pressed one end to the marked and pulled and pressed the rest of the spoil. Pressed it really hard from one end to the other and put on tapes to keep it in place. Continue to press for at least 10 mins one half and then another 10 for the other. Take turn for about 2 hours. Do the pressing for 3 days, without moving the car out of my garage.First notice, the left end doesn't bend enough to cover the curve of the trunk gate. Fixing: put pressure longer on that end.Secondly, the tape is so small and there was only 1 tape running crossing from 1 end to the other, not in a straight line as if trying to hold the whole spoiler. This cost cutting results in the loosening the whole spoiler when the glue tape gave up after the 5th day after putting on, or 2nd day of driving - remember I didn't drive it at all in 3 days after putting it on.Third, the glue tape and the adhesive promoter wipes are definitely not 3M at all.Now I bought 3M 2 sided tape to fix the left end and put it back, that fixed the left end. Then, the center part, almost the whole thing except about 4-5 inches at each end, falling off. What a nightmare as I don't want to damage the paint of the new car while taking this stupid thing off.The gap of the center is about 1/16 inch, I cannot slide the 2 sided 3M glue tape in to fix it. Really pissed off.Of course, I cannot return this because they stated that we can only return it if the tape is not peeled off.update: it's hot yesterday in San Jose, CA, mid 70s and after 2PM the whole thing decided to separate from my model Y, except the corner that had the 3M tape I replaced couple days earlier. With a hairdresser's assistance, I took it off completely.It's available for free, with a prepaid shipping box, if you want, it will come to your place.

Excellent purchase as an add on to the 2023 Tesla MYLR. The carbon fiber print quality is excellent and very glossy as wanted. Great form and came with very strong adhesive as well. Great item and only 1/8 the cost of Tesla Oem rear hatch spoiler. Highly recommend item. Delivery to the East coast was about 1 week. Item look solid on my Tesla Model Y.

Amazing product. Looks just like the one you buy at tesla for half the price.

Looks like factory OEM spoiler, right? Took <10 min to install: wipe surface clean w/ isopropyl alcohol, mark center w/ blue tape, heat gun trunk surface and spoiler sticky tape, then stick-on spoiler and lean fwd into it w/ both hands spread wide apart (apply pressure to promote adhesion) for 1-2 mind, ez peazy! Makes my cookie-cutter Model Y a lil different frm all the others..

When the product arrived, i was disappointed in a lot of things. first the product arrived days late. then when i went to pick up the box, it was sooo light, almost as if nothing was in the box. It’s less than 2 lbs and the spoiler itself is very small. i was expecting it to be bigger, but my other model 3 spoiler is almost double this spoilers size and weight. so overall disappointed, going to return the item

UPDATE 09/30/22Great great vendor. They were able to solve my situation. I really appreciate it. Even if it happens again I will re-buy parts from them. Thank you.---I am impressed with how long this spoiler has lasted adhered to my Model Y. For months I suffered with every car wash, thinking it was going to come off, but it did not. That is the good part. The bad, 11 months later, it just started to bubble up and flake. This means the clear coat is floating over the surface in some areas, creating air bubble. Looks like a UV related. I tried to fix it letting air out and using a heat gun, I got rid of the bubbles but it still looks bad. Now it looks decolored. I am disappointed it lasted only 11 months. since it was not cheap. I will have to replace it but I will try another brand/vendor.

I received this product and really satisfied with this product at that time. Good looking, Easy installation. But after 3 weeks, I was so embarrassed and disappointed. Because this product just got disappeared even I was driving local way. My place is California and never have a change of rain. How this can happen…?? I really want some feedback and response with this situation.——————-Never got reply. WORST customer service ever!!!!