Yecaye 283in Cord Hider, PVC Wire Covers for Cord on Wall, W0.59in H0.4in

This cord concealer kit was exactly what I needed to clean up the mess of wires behind my wall-mounted TV. The channels are sturdy, spacious, and well-designed, easily fitting multiple cables like HDMI, power cords, and speaker wires. Installation was simple—just peel and stick with the included adhesive (or screw in if you prefer). The covers snap on securely but are easy to remove if you need to make changes later. I also love that the PVC material can be painted, so it blends perfectly with my wall color. The 125-inch length across 8 pieces gave me plenty of coverage, and the included connectors and corner pieces made it easy to work around edges and angles. If you're looking for a neat, professional-looking solution for hiding cords in your home or office, this kit is a great value. Highly recommended!

We installed a large-screen TV in our kitchen and needed ~ 6 meters of HDMI cable to connect to the distribution point. I checked both commercial and 'home' raceways and chose this brand from Amazon. The HDMI cable is nearly 1 cm in diameter and I was concerned that it might be a tight fit, but I got lucky. The run covers two planes: vertically up the wall from the TV to the edge of the ceiling, left on that wall to a corner, and left on the adjacent wall to the connection point. The first two strips took about 10 minutes each to install while I got the 'feel' of the product, and the remaining 8 less than 5 minutes per strip. I had to cut 3 strips to length. I found that my carbide-bladed chop-saw worked perfectly for a clean and precise edge. The only problem I had was the inside corner: the cable was too stiff to use the 90-degree corner connector so I just mitered the strips to 45 degrees, just as one would with a wooden molding. Job done. The product is well-designed and sufficiently well-made. I had no problem with the adhesive tape, I found that a pair of sharp-pointed tweezers were perfect to grab the corner of the red plastic. I did not run out of tape, as some other reviews reported. My only complaint is the length of the strips. I would have preferred 4 strips twice as long (instead of 8 as they are) which required nearly twice the work. Of course that would have made the packaging twice as big, so I understand the reasoning. So only 4 stars for 'Easy to install'.

First impression is that it's an ok product. The package was short on some connectors and over on others, but that's not critical for my application. As I think others have said, the adhesive strips are NOT meant to be removed from the wall, unless you like looking at peeled off paint. The instructions are confusing at best. The pictures don't show needed detail in some cases. I'm going to contact the company and see if they can clarify some details for me. Note: be careful not to bend the channels and covers - they tend to warp fairly easily. I'm going to give it a 4, because it IS a good value for the price, and hopefully they can improve the instructions.

Overall, I'd recommend this kit as it is well made, does the job and can cover a lot of space. I could see, however, that the installation might be tedious for someone not accustomed to figuring things out and the directions are no help. For example, it's not clear which side is the base and which is the cover (the cover fits OVER the base as shown on the outside of the box). Also, each of the covers must be cut shorter than the base as they fit partially into the joint covers, so you'll have to cut each cover even if you're using full runs of the base. Be careful not to abut the bases too close to woodwork or inside corners or you may not be able to snap the cover over the base. Once it's all done, it looks neat and tidy. I'd definitely buy it again, but I have a lot left over from my first install, so that's pretty good value.

Worked very well for the single cable I was running. Easy to install and looks good when finished. I ran network cable along baseboard then up and around a door frame to the wall mounted TV. Still had enough left over to cover the electric cable also. The hardest trouble I had with install was removing the paper backing from the adhesive strips when mounting, so not much to complain about.

Awesome way to conceal your Ethernet cable , I ran a 100ft. Ethernat cable from where my Router is located to my Man Cave by installing this kits , I was able to run my ethernet cable up and along my walls aswell along side my ceiling where my panels run , it concealed it perfectly and the Adhesive backing is very strong. You don't have to connect the channels with the connectors since they flush against each other nicely . I highly recommend this product to whoever is looking for a way to hide their cables. T

Overall I do not recommend this product. It has a few fatal flaws. I bought it to run 50 feet of Ethernet cable across walls and over door frames. It's not capable of handling these long runs effectively. I would recommend looking elsewhere. The first issue is the adhesive. It's simply too strong and is capable of pulling the paint off the wall if you try to remove it. It's also tacky and rubbery so it does not stay in place nor is it easy to remove the backing before installation. This complicates the installation process. The second issue is the coupling design. While on paper it sounds brilliant, and in practice the parts do fit together nicely, where the problem comes in is the joints. The joins must be pressed in not snapped on. Thus it's physically impossible to run this stuff over any distance because you can't just lay down the cover and pop in the joints, they have to be physically pushed together so you have to run a full segment, then another, then another. The third issue is the couplings. They are thick and do not allow for the runner to be flush against trim like door frames and moulding. This leads to a cheap look after installation. With some improvements this product could be much better for longer runs. As is I would not recommend for more than a few feet.

I purchased three of these kits to run two flat ethernet cables from a closet in my bedroom where my network is located. I was able to run the system along the baseboards and have it barely noticeable. I had to run over two different door frames in order to reach one location I needed, and across the ceiling to reach another location. Unfortunately as it's designed for 1 cable, there's no three way splitters included. Even though it can easily handle two flat ethernet cables. So in one T junction I had to leave the wires exposed. I also had to leave them exposed under the doorways as there's no clean way to implement that. The ethernet cable I purchased came with those small hooks that have a nail in them, and I was able to put both cables together with two of those under the doors very cleanly into the next wire covers. The adhesive is very plentiful as well, and some of the best Two faced tape I've ever worked with to take off the second sides piece. I was able to easily use my thumb nail to get the plastic off it and stick it to the wall. It did take a bit of work to get things lined up correctly, but I used the straight line pieces that came with the kit as spacers from the baseboards. Basically I would stick one on, get the next piece ready and then stick it in position. When I finished I had to go back through and take the covers off everything to put the cable in, but it seemed like the best way to ensure everything was lined up perfectly. I even did a small diagonal piece and the way the sections are made they can hide completely in the connector pieces. Very nice kit, especially for the price.

المقاس ممتاز يناسب سلك الانترنت سهل التركيب افضل شي وصلات الزوايا ساعدت على اعطاء منظر جميل للجدار

Product is good and the price is OK

J'ai acheté ça pour retenir le câble des deux capteurs de l'ouvre-porte de garage. J'ai malheureusement mal fait mes calculs (les 2 fils se séparent à un endroit et je n'ai pas calculé cette longueur de fils) et ça ne se rend pas tout à fait jusqu'aux capteurs mais au moins ça fait l'essentiel. L'assemblage se faire assez facilement et le ruban à double face est extrêmement collant; attention : aucune erreur permise sinon la peinture peut s'arracher si on le retire trop rapidement. Donc, ça répond à une inquiétude que j'avais à ce sujet, mais ça tient bien. Il y a plusieurs connecteurs et coins de quelques formes (vers l'intérieur, l'extérieur, gauche/droit), mais, un seul n'y est pas et ça serait bien, un connecteur en forme de "T". Mais autrement, ça fait l'affaire et les fils ne risquent plus de se retrouver dans le mécanisme.

The track is nice, but such short lengths mean that a lot of joints may be needed. The joints really stick out, so while that is okay in hidden locations, it really looks bad in the open IMHO. I needed to run speaker wire around a gas fireplace. So I used the corner joints, however butted the ends of the track to make a cleaner look. I cut the back side length so the 2 sides overlapped for stability. There are gaps but I'm very happy overall. A 30" length option would be so nice!

While you do have to apply the double sided tape yourself, they work well and stay put. They are small, so you’ll only fit one thick Ethernet cable plus a small charging cable, but acknowledge this before getting it. It was perfect for my use which was running an Ethernet cable a long ways. The price is good for how much distance the kit covers.