Industrial Grade Cyanoacrylate Adhesive - 8 Oz Thin Viscosity, Extra Large, Protective Cap

I used this to create rock work for my saltwater tank. Apply a little bit of this glue, then some of the finest substrate you can find, and then repeat until you have a good firm hold. Works perfectly and the thin viscosity works itself into the substrate perfectly.

I have used about every CA glue out there. This is the best. Be very careful!!! It wicks very easy and if it gets on you, it burns!!! I am impressed how well it wicks. You can glue the bottom of wood and it draws up into it. The only thing that disappointed me at first is I had boughten a bunch of long fine tips that will not fit over their nozzle. I thought maybe they will fit inside; I cut them to the taper and installed them from the inside, worked great. DISCLAIMER: DO SO AT YOUR OWN RISK, IF YOU DO NOT SEAT THEM PROPERLY THE GLUE CAN RUN OUT ONTO YOUR FINGERS!!!!!!! When done, I clamp the very end of the tip and when ready to use i cut off 1/32" and I am ready to start gluing. Make sure you do not work overhead with this or have your fingers below the tip. This is super thin and wicking, so it drips extremely easy and glues on contact.

Very good product

Just an fyi, the low viscosity glue is very low viscosity. It pours like water which surprised me. The medium is too slow for using 20 times 5 minutes as I do. The low is messy because it comes out so fast. I use just gravity and have gotten the hang of the low viscosity but I wish they made something in between. Very good adhesion with both products.

Great Value. Easy to use (and store). The glue is very thin so it disburses quickly, making wood finishing easy. polishes to a nice smooth finish with lots of shine. Good stuff I would definitely recommend it.

This stuff is awesome! Sets within seconds, the "Thin" is really thin, flows like water. Standard caution when using a Super Glue product, use with rubber or latex gloves. Use sparingly a little goes a long way. I've transferred from the big bottle to smaller bottles with needle ends and this works great. Highly recommended.

I had log ends that had been removed from my log home which after I moved I kept for use as footstools and plant stands in my covered porch. One of them was being slowly destroyed by wood destroying insects and rot from moisture exposure. This stuff was slurped up by the raw log bottom and created a solid mass out of what had been soft, rotting wood. It worked beautifully. Now I’ve put little feet on the bottoms of my log ends to keep them from sitting directly on the stone porch floor. It was a perfect answer to an unusual problem. Those log ends are a very sentimental remembrance from my years living in a beautiful log home on a remote island in the PNW!

The glue works great, but the container got clogged up on the first use. The glue is still liquid inside the bottle but I can't get it out! This stuff has been around for years. Why can't they figure out how to package it so it is reusable??