Spigen Air Vent Car Mount Adapter for MagSafe Charger - Black

I’ve had two prior off-brand Apple “MagSafe” car chargers/mounts. They all seem to have flaky charging, and/or they fall apart and lose the grip on the vents. This utilizes the Apple-made charger and provides a sturdy, easy car mount. The Apple MagSafe charger is forty bucks, and a name-brand charger is another twenty, to make this an eighty dollar solution. Eighty is a bargain compared to tossing-out a failed “cheap” solution over and over. The clamping is solid and doesn’t have a lot of springs or complicated parts to fail. It’s also easy to use for travel, so you can stick it in a rental car.

I love how easy it is to install and how secure my phone feels on it. She won’t take any super rough bumps but I can go down my old dirt road and bounce around and my phone is still attached and charging. She’s only fallen off once or twice when I hit a really bad bump

Installation was easy and quick on my RAV4 vent. It clamps onto the vent solidly and does not fall off. My Apple magsafe charger fits perfectly as expected. And of course, the magsafe holds my phone solidly and charges as expected. This is an inexpensive solution to adding Apples magsafe charger to your car

Nice little device. It clips onto my car dash vent and holds the magsafe charger firmly. It does sometimes swing/tilt to either side, but that's kinda helpful for the passenger so I don't mind. I don't worry about my phone falling off, or the charger falling out. It should be noted that you can't remove the charger once it's stuck in like I had planned to use it. (well you can, but then the sticky won't be good enough anymore) and yes, the charger doesn't come with it, so when you order this, make sure to also order the charger and a cigarette lighter adaptor if your car doesn't have a usb port. My husband liked this setup so much he ordered one for his own car! No more fiddly cradle arms or tricky release buttons. If you have a mag-capable phone, this is a great solution to buy.

I liked the simplicity of the product. I initially used it in ‘vent’ mode but didn’t like that it blocked the vent. I purchased an AMPS 17mm ball mount and a Proclip mount to put it all on. The Spigen easily attached to it and everything is rock solid with 15 watt charging thanks to my 20 watt Amazonbasics charger. Now I can charge my phone without plugging it in, and don’t have to manipulate a cradle. Additionally, it’s rock solid despite potholes and hard acceleration. The only thing I forgot was to purchase wire guides to make it a bit cleaner. Convenience and functionality!

The holder itself .. what you are buying, works well. I liked it. The issue is with the Apple Magsafe charger, which does not have a strong enough magnet to hold the phone vertically except in very smooth terrain. I have had the holder/charger combo for a few months. At first it seemed OK. My phone falls almost every time I am in the car now, so I need to stop using it. Totally not the fault of the holder, but unfortunately, the total solution works poorly if you have anything except pristine roads.

I recently invested in the Spigen Mag Fit Phone Holder Car Mount designed for MagSafe, and while the product itself is undeniably high-quality and functional, the price point may give potential buyers pause. Here's my detailed review: 1. Superb Build Quality: The Spigen Mag Fit Car Mount stands out for its impeccable build quality. The materials used are top-notch, providing a robust and durable feel. The sleek black finish adds a touch of sophistication, complementing the premium design of the iPhone 15 Pro Max and other compatible models. 2. Secure MagSafe Compatibility: The Mag Fit Car Mount is tailored for MagSafe, ensuring a secure and reliable connection with my iPhone 15 Pro Max. The magnetic attachment is strong, keeping my phone firmly in place even during bumpy rides. The alignment is spot-on, allowing for easy one-handed docking and undocking. 3. Adjustable Viewing Angles: The adjustable arm and rotating ball joint provide flexibility in positioning, allowing me to achieve the perfect viewing angle. Whether using GPS navigation or simply accessing apps on the go, the Spigen Mag Fit Car Mount enhances the overall driving experience. 4. Convenient MagSafe Charging: The Mag Fit Car Mount is designed to work seamlessly with MagSafe wireless charging, allowing for convenient power-ups on the road. It's important to note that the charger is not included, and the mount requires a separate USB-C car charger for optimal performance. 5. Considerable Price Point: While the Spigen Mag Fit Car Mount delivers on its promises and provides an excellent user experience, the price tag may be a deterrent for some potential buyers. Compared to other car mounts in the market, it leans towards the higher end, making it more of an investment for those who prioritize premium quality and design. Conclusion: If you're willing to invest in a top-tier car mount that seamlessly integrates with MagSafe technology and offers unparalleled build quality, the Spigen Mag Fit Phone Holder Car Mount is an excellent choice. However, the higher price point should be carefully considered, especially for users who may have budget constraints. Ultimately, the Spigen Mag Fit Car Mount delivers a premium experience for those who value the combination of style, functionality, and MagSafe compatibility in their car accessories.

Like that Spigen use an adhesive pad to fasten the MagSafe “puck” into the holder very securely. Others just try and squeeze the outside diameter of the charger and it can gradually work its way out with vibration. Some I have tried also damage the MagSafe charger finish trying to get a secure grip by friction alone. Can confirm that current production has the smaller top bezel to avoid conflict with the iPhone 13 mini camera bump. Perhaps someone else can confirm that this has also solved the problem with the pro models. I have a car with VERY stiff (auto cross) suspension and the Pennsylvania roads are atrocious. With an Apple leather case and (the slightly weaker magnetically) Mous case, have had no problems with my 13 mini falling off the mount. I do use a lanyard with the Mous case which I hook over the mount to increase the chances of still being able to find my phone in the event of an accident. Not a great fan of vent mounts (they are always floppy and restrict ability to direct airflow where you want it) but the lockable “claw” on this holder is one of the better, more secure designs. I now combine this holder with a 17mm to 1 inch ball adapter that fits right in the socket on the back once the vent mount is removed. The 1 inch ball then clamps right into a Ram or similar mounting system. Most of the negative reviews of this product seem to be as a result of the requirements of the charger and not this mount which is a little unfair. To use it successfully you will need: 1. An Apple MagSafe charger. The holder is sized specifically for the Apple unit. Spigen make their own integrated MagSafe mounts if you don’t need the faster charging of the Apple unit 2. A USB-C PD 9volt capable power source. Very few cars have USB-C built in yet so you will need the sort of power adapter that plugs into your 12volt (cigarette lighter) socket. 3. To read the instructions and remove the film from the adhesive pad before inserting the charger!🙄 MagSafe makes much more sense to me as a car mount than as a regular charger. At home, plugging in a cable is easier, cheaper, charges faster and creates less heat. In the car though, having a single handed magnetic mount that also charges is great. Have tried several other MagSafe holders and this is the most secure and quality for the money so far.

I got two of these, it's really nice to have a holder and charger combined without having to fiddle with a charging cable everytime you can get in and out of the car

Werkt prima, blijft goed zitten

This + the OEM Apple MagSafe charger is the best phone holder on the market. Pros about this particular holder: You can adjust the clamping force on your vents. If you have weird vents that Don’t work well with most vent style mounts, this will solve that. Naturally you also have control over the tension of the ball mount, is a must have if you have the larger phone. Another large pro is the build quality, it doesn’t feel like cheap plastic. The Final major pro I noticed was how small, slim, and compact it is. Caveat: Buy a MagSafe charger and have it semi-permanently affixed to this mount. $20 + $55 = $75 + tax. This is the total cost and it is worth every penny. You could buy the very popular ESR mount for $35, but you’re not getting OEM, and that mount is way bigger / bulkier in every way. Just buy it.

The only one available for the MagSafe in the uae

Fits the MagSafe charger perfectly. Although the adhesive is so strong it’s practically permanent so once you stick It on it’s impossible to remove it.