FEL-PRO 72493 Engine Oil Cooler Seal for Subaru Outback

Fit 2005 G35 Coupe. Initially, I thought the ID is a bit too large when comparing with the old gasket. This gives me the perception that it doesn't fit. Actually, it does. I'm changing my review from 1 to 5 stars. I believe the old one shrank overtime. I even removed the oil cooler to confirm the fitment. The old one seems in good condition and pliable, but don't reuse it. It has lost its thickness to properly seal. One pic shows the old o-ring is flush with the metal groove. The other with new gasket shows the gasket is higher than the groove; this is what you want. Remember to torque to spec (36ft.lb), or else you risk the cooler backing out slowly each time you change oil filter.It's a good practice to check torque of the 22mm nut every oil/filter change.

I got this Fel-Pro part number from some other sources that included pictures showing that the packaging stated it was for a 3.5L V6 Nissan motor, but was actually the correct part for the 5.6L V8s in first gen Titans and Armadas. Amazon also says this part should fit my vehicle, so that's good.Sure enough, I received exactly that! Perfect fit for my Armada, despite Fel-Pro's inaccurate package description. This gasket was almost twice as thick as the old, leaky one! But, it snapped right in to the oil cooler, didn't even have any trouble trying to keep it in place while putting the cooler back on!Unfortunate for everyone that ordered this seal for other Nissan engines that it doesn't fit...hopefully that issue has been resolved, but this is definitely the correct part for the big V8 engines. So. if you aren't sure- go cross-reference OEM part numbers!For some reason it took almost 2 weeks for it to ship, even though Amazon said it was in stock. It's not a Prime item, but I still had to wait almost 3 weeks for the seal to get here while all the little oil puddles everywhere kept growing! I'm not docking stars for shipment issues or delays, since this is an ITEM review, not a service or shipping review.

Fit 2007 Altima 3.5 (VQ35DE). No leaks after 500 miles. O-ring inner diameter looks slightly larger than OEM (with 100,000 miles on it), however seated properly in groove on back side of oil cooler (OEM o-ring is underneath in first photo and upper in second photo).

great price great product

I wish I had taken pictures, but you'll just have to trust me. When I changed the gasket I put the new and old side by side and noticed the new one was thinner. Same diameter, just not as thick. But I chucked the old one away and put the new one in. I was concerned at the size difference, so I put fresh cardboard under the filter to check for leaks. The morning after looked good, but after a trip to work and back, the next day I had a small pool of oil. I though maybe I didn't torque the bolt down enough so I went through the process again. Nope, same thing next day. So I went to a local autoparts store and had them look up the part. They came up with the same part number from Fel-Pro but when they brought it out, I could immediately see the difference in thickness. It looked more like the original. Once more swap out and now, no leaks. Not sure if this was just a mis-packaged gasket or what, but just a little advice for anyone reading this. If it doesn't look exactly like the gasket you are replacing, then don't do it!

Good fit worked well stopped oil leak on my 08 Nissan Titan

Noticed that some reviews state that this gasket doesn’t fit its listed applications. I was just about to conclude the same for my ‘08 Quest, but decided to completely remove oil filter base so that I would have unencumbered access to the gasket slot on the rear of the filter base. Once I could install the gasket straight on, had no more problems with it seeming to be slightly oversized. It’s a snug fit but I have no more oil leaking from the filter base on my wife’s van. Nice to be able to park in the garage without needing a drip pan.

Fit right in