HOTAS Desk Mount Set of 2, Adjustable Flight Sim Joystick and Throttle Mounts, Compatible with Thrustmaster Warthog/WinWing Orion 2 / VPC WarBRD-D Base/VPC MongoosT-50CM 2/3 Base

These mounts are solid and don't budge at all once clamped to the desk. Heavy-duty materials with perfect tolerances. Nothing wiggles even the smallest amount. Every possible adjustment point you might want is present, and the track system provides a quick way to dial in the position. They come nearly fully assembled with additional nuts and bolts and hex wrenches to apply them. The locking mechanism is smooth, and the nylon bumper and rubber desk protection are well-crafted. I mounted Winwing's Orion 2 F-18 HOTAS. It wasn't listed as compatible and nearly worked out of the box but for the supplied bolts being a smidge too long and the gear sliding when attached. Adding a small washer to each bolt was all it took to adjust to a perfect bite under even the hardest stick pulls. If Meza included a handful of washers they could justifiably call it fully compatible with Winwing's Orion 2 line. A well-crafted piece of equipment at a fair price. Packaging was first-class as well.

I recently purchased the Meza Mount - Set of 2 Heavy Duty Hotas Desk Mounts, and I have been mostly impressed with the quality of the product. The shipping was prompt, which is always appreciated. As for the mounts themselves, they are a testament to good engineering and design. The build quality is top-notch, featuring clean lines and a sturdy aluminum construction that exudes durability. Installation was pretty straightforward, thanks to the included manual. The clamps are well-crafted, providing a secure and seemingly immovable grip on my desk. I was particularly delighted to find that the mounts fit my WinWing Orion 2 Hotas Max like a glove, which is a huge plus. However, it wasn’t a perfect experience. I encountered a snag with the provided screws for the joystick base—they were too long. And frustratingly, the screws that came with my joystick were too short. It was fortunate that I had a couple of spare screws from my throttle base that fit perfectly. So, future buyers, take note: you may need to find screws of an intermediate length. Additionally, the design for securing the throttle base involves an inverted screw-up approach with a nut, which can be a bit tricky due to the limited clearance. This wasn’t a deal-breaker but is something to keep in mind during assembly. Overall, despite the slight inconvenience with the screws, the Meza Mounts have added a level of professionalism and solidity to my flight sim setup that I didn’t even know I was missing. They are a fantastic choice for any serious flight sim enthusiast, provided you’re prepared to possibly supply a couple of your own screws.

As a flight simmer, I recently purchased a WinWing Orion F/A-18 HOTAS. It comes as a "sit on top of desk" solution with the option of mounting. However, I found it difficult to find a mounting solution. Enter MEZA Mounts. Not really wanting to drop $100 per mount, this solution from MEZA offered a small savings with (in my opinion) a comparable solution. Prior to purchasing I asked MEZA if this mount would work for the Orion HOTAS and they stated no, yet another customer said it would. I purchased to find out myself. To my surprise it worked (with a minor modification)! Joystick mount- perfectly fit my Orion F/A-18 grip with no problem at all. Quick disconnect is a great feature! Throttle mount- because Winwing's USB connection is centered on the throttle base, my throttle quadrant cannot sit straight on the mount. Have no fear! Canting the throttle a bit to the side (as pictured) allows me to mount the throttle base. And to be honest, it makes the throttle a bit more ergonomic/comfortable for me in my setup! My only complaint is the rubber pads on the mounts themselves. Either they are poorly aligned from MEZA or the glue is just inferior. Additionally, they could be "grippier"/ "stickier" for my desk (wood desk) but I'll figure something out. Overall, great product, very happy with my purchase and have had zero malfunctions. Check out the pics for a better look!

Solid, high grade aluminum construction - I swear you could tow a boat with these as a hitch. The lever clamp is flat awesome- 1 second to attach/detach and easily adjusts to whatever exact pressure or thickness you like. No cranking on hand screws or wing nuts, once it's set you just pull the lever and it clamps HARD. They don't move 1mm in any direction over hours of dogfighting. I use TM Warthog, maybe the heaviest throttle there is - no worries at all with these mounts... my bs ikea desk would break first. BEST part is the widely adjustable height for the mounted sticks - I can finally fly with controls down low, and center-stick between my legs like it should be instead of up on the desk. Simple, elegant, and excellent machining work. Worth every penny.

I bought these to mount my WinWing Orion II throttle and joystick base. The clamps are very sturdy, and the metal is all of excellent quality and machined nicely with wounded and beveled edges. There are ZERO instructions, which would be helpful in sorting out which nuts and bolts go where. All screws and hardware are good quality and the correct sizes and thread patterns to fit the intended HOTAS system. They even give you a few spares/extras in case you lose something - always a nice touch from a manufacturer. I only note two opportunities for design improvement: First, the clamps are very strong, quick to attach and release and easily adjusted for a wide range of desk thicknesses. I do wish there was a little more space between the clamp and the base to allow the clamp to go behind the small lip on the front of the desk. Most desks aren't just a solid slab of wood; many have a lip on the front edge. Mine is only 3/4" deep and the clamp can't clear it - it clamps to the lip instead of the horizontal desk surface behind it. I ended up gluing a 3/4" thick strip of plywood behind the lip to allow the clamp to mate to a flush surface. It was still reasonably solid before I did that - not a deal breaker. My second observation is the mounting plate for the joystick base is very long Even adjusted as close to the desk as possible, the plate positions the joystick much closer to your body than it needs to be, forcing me to sit farther from my desk and screen than I would like. The plate could easily be 2" shorter and still have plenty of clearance for the joystick to push forward to its limit and not have your knuckles touch the mounting rail. Especially when mounting a throttle base, it would be nice to position the stick farther forward to more closely match the relative positions in the actual cockpit. There would still be plenty of room to adjust the position closer to the user, making the whole thing more versatile. Overall, very impressed with the build quality and would buy again.

What an upgrade for my HOTAS. I didn't realize how flimsy my last mounts were until these showed up.

Solid desk mount - I'm using with a WinWing Orion2 HOTAS and throttle. Easy desk attachment. Both fit but you may need some additional nuts/bolts to mount.

Like the headline says, I received my mounts today. Workmanship looks great, BUT I am missing two threaded inserts that allow the HOTAS mounting plate to be attached with the provided M8x16x2 screws. Without these inserts, one of my mounts is useless! I have contacted the seller via Amazon. We'll see how they respond, and if they do I'll adjust my rating. If they don't respond soon, back it goes. This is a revised review. After my problem, the seller contacted me and offered to send me a new set of mounts free of charge, even without returning the old one. In trying to solve my problem, I found a set of T-nut fasteners in the M8 thread on Amazon that looked like they would work. I got them in today and they fit (not as good as the originals in the other mount), but they work. The seller went over and above what I expected for this sale, and is definitely someone I would not hesitate to do business with again. The quality of the HOTAS work perfectly now and are solid, adjustable and absolutely do not move if installed correctly.

100% as claimed. Zero complaints from me. Makes it so easy to move my HOTAS in and out of the playing arena when switching between games. Love this.

Heavy duty. Clamp to my desk well. They have Been holding up my winwing Orion 2 setup for about 4 months and hasn’t even loosened. Used 4 to 5 times a week

I thought this would be a poorly made rip-off. I was wrong. This does everything on the tin. A study build quality was my #1 concern and this delivers. I'm very happy with this a a solution for the Warthog HOTAS system.

excellent product. fits for warthog hotas thrustmaster.Very sturdy.

Super easy to put together, very sturdy mounts and fantastic quality!! 100% recommended.