Bora Centipede Table Top Workbench Top 20mm Dog Holes MFT Work Bench Table | Fits Bora Centipede stands to create an MFT workbench table top with 20mm dog holes and quick-twist lock handles

So happy with this. Versatile, compact and with the extenders, makes it a back saver. Bench dog holes are 20mm, all my bench dog accessories work great. Spend the time and paste wax it. Saves it from glue sticking and ruining the mdf.

I used this as a top layer for my Home made MFT.

The 20mm holes aren't - they are only 19.75mm so any 20mm accessories you hope to use with this won't fit. The one I received isn't a 3/4" hole board in the wrong box - the holes are much to sloppy for any 3/4" accessories to work. Anther disappointing feature would be that the edges of the holes aren't beveled so if you were able to stick your dogs or clamps or other accessories in them, the edges of the holes would quickly chip and become an ugly mess. I really don't know how a company could produce something as wrong as this. I contacted BORA about it and received an email asking for pictures with no way to respond. So, here's your picture.

Very solid and a bit on the heavy side. I bought the one with 20mm dog holes and purchased bench dogs to fit but they are too large. Others have mentioned the same issue. Will order 3/4 inch bench dogs and see if they work. I ordered during prime days so it was a good deal but not if I can’t locate bench dogs that fit. Very frustrating that these could not be made accurately.

Very well engineered. The 20mm holes are perfectly aligned. Works with parf dogs and other MFT accessories. A less expensive alternative to other MFT tops. Folds and unfolds easily. I waxed the table for a bit of spill protection and starting using my track saw on it. It will take years to wear this one out, but I will order this top again when that time comes.

Big fan on the Bora products and the space saving and portability of the Centipede. The table top is solid and easy to move around. I now have 3 which work great with my 4x6 Centipede.

I can't recommend this. 1. The first top I received wouldn't remotely fit any of my bench dogs... it appeared to be the 3/4" imperial measure top, rather than the 20mm metric top that was ordered and indicated on the box. But with no distinguishing marks on the actual board, who's to say for sure. Cuz, leave it to Bora to incentivize bad behavior: If you charge $15 more for the top with 20mm than the top with 3/4" (19mm) holes, then bad actors are going to buy both, switch the packaging and return the more expensive box with the cheaper 3/4" holed-top to slog off on the next unsuspecting buyer. Thanks a lot Bora! And you can't blame it all on HUMIDITY-- It's July... in California... the hills are brown and dry this time of year. So I returned the unusable top and took a risk asking for a replacement top... hoping it wasn't a problem with Bora's manufacturing, but just their pricing policy and a bad actor. The 2nd top arrived promptly. The top did appear to be the correct version this time, but, geez, ALL of the holes are still way too tight. None of my bench dogs would fit properly. Only one part of one of my Bessey clamps could I POUND into place. Ugh. But rather than return the board (which I should have), I decided to order the UJK Combined Chamfer & Reamer Tool from TSO products for $47.95 + tax and shipping in order to ream out the holes and add a chamfer top portion. But even that is proving difficult. My old trusty heavy duty Dewalt dc988 18v xrp HAMMER DRILL is struggling... cuz these holes are just sooo dang tight. I'm going to end up burning out the motor trying to make these holes usable. I've managed two so far... having to let the bit and motor cool down after each single hole... only 68 more to go! What a headache. Spend the $$, and buy a better version of a MFT top... this one is not it. The only good part about the Bora Centipede system, is the centipede stand. It IS light weight, strong, and sturdy, which is what I wanted... But the top sucks. So buyer beware! In the attached photos, the two upper holes in the far left column are the ones I already reamed out/chamfered. You can see how after doing that, the bench dogs now fit... but all the other holes, none of the dogs fit.

Just what I was looking for to make my first multi-function table. Paired it with a track saw hinge i bought on Etsy. From what I understand, actually pairing it with the Bora Centipede is not awesome due to the lack of weight and heft of the legs. Other options such as a full size mft table top, or even the professional jig to make your own, are several times more expensive. This top has sufficient accuracy for most uses.

Sehr gut verarbeitet. Gut zu nutzen und zu verstauen. Stabil und sinnvoll.

Great table

should be useful for any wood worker.

Yes

Molto utile e ben fatto