Air Venturi Male Quick-Disconnect, 1/8 BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal

The adapter fit my hatsan hand pump and has not given me a moments problem. It does what its supposed to!!

Works well, just make sure you do more than hand tightening, need a couple of wrenches to seal properly.

Works great now I can use the hose and moisture filter from my air Venturi compressor on my umarex ready air too I tried to buy another moisture filter on Amazon, but it didn’t fit. It was a different quick connect, but this lets me interchange it to both compressors.

This adaptor works exactly as advertised. Arrived on time. Has excellent instructions. If you have one of the Hatson airguns you must have this adaptor or one like it in order to use any of the high pressure hand pumps available from Amazon.

I attach one of these QD connectors to every fill probe I own to make quick-disconnect fill probes. They work great. No leaks if you connect them up properly.

as described

First i need to say something about the negative reviews, apparently they don't know how used the fitting because there's nothing wrong with it, works fine and easy to set up I was looking for something like this to used in my Hatsan BT65 and my AT44 using the same hose I used to fill my Benjamin Marauder and my San Yang 909 big bore this product is what you really need so you don't have to change the hose every time you want to fill your Hatsan rifle or any other pcp using the same connector you don't need to put that little plastic that come with the fitting just used teflon tape and that's it, Your not gonna have any leak in your connection, I hope my pictures help you good luck shoot safe and have fun.

While I have no doubt that the majority of these fittings do work properly, the one that I just received does not. The tolerances are too big causing an Extremely tight fit. When first test-fitting to the female quick connector, an extreme amount of force was required to get it to seat all the way and finally connect. Like another reviewer mentioned, material will have to be removed in order to get this fitting to connect properly / as intended.. Also, using process of elimination.. I thought to try the fitting in another female quick connection that I have for my airbrush compressor.. The exact same thing happened. The fitting would not fit without exerting an extreme amount of force.. I tried the 1/8 inch quick fitting from my airbrush in my pcp compressor hose's connector, and sure enough, that one fit. As did the one piece quick-disconnect-fill-probe from my other PCP rifle. If I had spares, I would return this one without a second thought. Unfortunately, it's the last piece I need to test and use my brand new rifle and compressor combo, so, it will have to be modified. For the price of these, it should have worked 100%. In the end, do I still recommend them? Yes! The odds of getting one that works far outweigh the odds of getting a bad one.

Fits well with my filling probe.