Rev Up Your Ride! 🏍️
The CarbmanPW80 Carburetor is a high-performance replacement part designed specifically for Yamaha PW80 and BW80 motorcycles from 1983 to 2006. With a 20mm inner diameter and 32mm outer diameter, this carburetor ensures optimal airflow and fuel efficiency, making it an essential upgrade for any serious rider. Easy to install for professionals, it promises enhanced performance and reliability on every ride.
| Compatible with Vehicle Type | Bike |
| Recommended Uses For Product | Motorcycle |
F**
It works great.
Dirt bike works great! 👍🏻
T**E
up and running
Not too bad of a carb for the price. Pretty much plug and play. Had to adjust the idle and air screws a little to keep it running. I didn't like the way the carb seals to the Reed housing. On my first try it didn't slide on all the way and left about a 1/2" gap between the carb and stop on the Reed housing. In that position the bike would start but I could adjust it to idle. My guess was that the seal was not fully engaged and letting air in behind the carb. So I took the carb off and oiled up the inside of the plastic spacer and the rubber seal. I was able to get more engaged by hand force but eventually had to use a wood block and hammer to get it fully seated. Ran great after that.
B**M
No fit guys…..
This did not fit the Yamaha PW 80 only thing I could use off of this is the bowl gasket float and pen pretty much bought this to rebuild one of the Excelerator and choke do not seat and there’s extra hoses for somewhere. We have no idea where the Jets are even different we have two PW 80s
B**N
Perfect!
Worked perfectly on my PW80! Took a little tweaking to get it tuned, but definitely better deal than getting a rebuild kit!
L**D
Wrong pilot jet size
The carb does fit a pw80 but you will need to swap the pilot jet from your existing one as this one is undersized..
Trustpilot
2 months ago
1 week ago