Gator Cases Pro Size Wood Pedal Board with Nylon Carry Bag with External Pocket | 30 x 16" (GPT-PRO)

I really dig this pedal board. I researched the others out there (SKB, Pedal Train, etc...) and found this one to be superior in construction and price. It is made of ply board and is pretty heavy but you don't have to worry about it breaking or moving around on stage. It also holds a slew of pedals. I have ten on there right now and have room for another five to six. All that I would need... beyond that it's overkill. The two front pockets are great for carrying spare cables or cables for your guitar to pedal board and then to amp. Also can hold your music or just about anything you want (except for the kitchen sink). I highly recommend this pedal board. It is lesser known, but the quality is super great.

I have two of these Gator boards. One 18 inch and this newest one, 30 inch. I think they're great. Made of plywood so they're a tad on the heavy side, but even when loaded with pedals, amps and other things in my kit are heavier. Some guitars are heavier. I can still carry it with one hand. The board is pretty indestructible. It won't/can't bend like metal boards. The entire face of the board is covered with Velcro. Lots of mating Velcro comes with the thing to attach to the bottom of your pedals. There is room underneath to mount just about any power supply (or two). Best part of this board is the soft case. Most soft bags have sewn on handles that are pretty much guaranteed to fail after lifting a board full of pedals time after time. The Gator bag is engineered differently. Instead of a sewn on handle, the handle that's riveted to the front of the board sticks through the top of the bag. When you pick the whole thing up, you're holding on to the BOARD, not the stitching on the bag. Very strong design. Pics show the handle/case design, plus my straight ahead jazz minimalist setup..😎

This pedal board is quite solid, and the quality of the bag is quite good. For what I paid, it was a good deal, and met my specific needs. However, along with the good points, there were some issues. Here are the good points: -- Solid contruction, although heavy. When loaded up with pedals, etc, it will have some heft to it. -- composite wood contruction allows for screwing things in place, easily drilling holes where required, etc. This is great for customization. -- The wood construction won't interfere with wireless receivers (such as the Line 6 G30 product) which have internal antennae in the base of the receiver. Metal frame pedalboards can sometimes cause issues with the G30. -- The pedalboard is sloped, which not only makes pedal access easier, but also provides a handy place underneath for attaching power strips, DC power supplies, etc. The board comes with screws already in place underneath for attaching Gator's own optional multi-pedal power supplies. -- The pedalboard is easily removed from the bag. -- The bag quality is good, which strong zippers which operate quite easily. -- There are two roomy, sturdy pockets for extra cables, etc. -- There is a sturdy carrying handle on top edge of the board, which sticks up through the bag for carrying the board in the bag. Now, here are the negative points: -- The Tolex-type black material covering much of the board did not have tight seams. In the corners, you could see exposed wood at the seams. I used a black "Sharpie" brand marker to cover the exposed wood so that the seams would not be visible. -- There were some "bumps" under the Tolex covering in a few places, which indicates that there may have been some surface defects in the wood, or glue bumps, in those areas. Not a big deal, but evidence of shoddy workmanship when applying the Tolex covering. -- The biggest functional issue was that the "loop" material (which covers the entire top of the board) was lifting up at some of the seams. The material is actually composed of several wide strips, butted up against each other. The loop material was actually pretty easily fixed. I pressed it back down into place (it still seemed to have sufficient tackiness to the adhesive); then, to ensure that it stayed fastened properly to the pedalboard, I took a industrial stapler (the type used for fastening upholstery, etc) and stapled along all the seams, with a staple straddling a seam every 5 or 6 inches. I also stapled along the outside edges of the loop material covered area. This worked very well. I've had no problems since then with any of the material pulling up, even with some heavy equipment Velco'ed onto the pedalboard. I then took the same black "Sharpie" marker and colored over the top of the staples, so that they mostly disappear into the loop material background. Final analysis: although I had to do some "improvements" to the product, I would buy it again if I needed a second one. For the money and my needs, it is a good value.

High quality fit and finish and TONS of space, but those white lines are velcro strips, not holes for wire management. Additionally, there are mounts for TWO (of their brand) power supplies on the underside. So if you already have a power supply, you're going to have to find a spot for it. Overall, this is a nice board if you're going to buy into their ecosystem, but cable management is nonexistent and would require permanently modifying (drilling) the board and that doesn't work for me. I will be returning this and purchasing something that more fits my needs, but if this works for you, it feels high quality and like it will last for years to come.

Weighs a ton even without pedals. The pedalboard and case are a poor fit; you need a shoe horn to get the board into the case to the point where it will close properly. The handle on the front edge of the board doesn’t align with the opening in the case. I’m a big fan of Gator products, but they dropped the ball on this one.

I have 14 pedals on this board, plus other gig related stuff in the roomy front pockets. It carries easily, is solidly constructed and will probably last a very long time. Good price for a good product.

I bought one and loved it so Much I bought another one and built a different rig in it Large enough to hold all my gear, you can mount a Gator Power supply on the bottom. Plus there are opening to help manage the cables. And there’s a case and a handle so you can travel with it

very sturdy, can with stand a good stomping, overall im very pleased with this pedal board!! Its GREAT!

Si me gusto esta muy grande y eso hace que pese mucho pero si cabe todo lo que necesitaba poner ahí

I read all the Amazon reviews for this product before I bought it, just as you are doing now. I get the impression that some people just like to moan for the sake of it. This product provides exceptional value for money, it's one of the biggest pedal boards around and was exactly what I was looking for to fit a Boss Rc 300 looper and a few other pedals on. It's solid as a rock, the handle is fine, it's very sturdy and strong, the bag is perfect. I was so impressed that I went on and bought the power supply (G-Bus 8) for it too (mine was a bit big to fit underneath). Buy it, you won't be disappointed, or, alternatively, re mortgage your house and buy the biggest Pedaltrain, then pay someone to carry it around for you. Ps. all those people that moaned about it being "Really heavy" are pussys! It's not really heavy!

Esattamente come descritto, non ho trovato ancora punti di debolezza. È addirittura più robusta e professionale di quel che sembra. Sono molto soddisfatto

Bestes Peadal Board seit Jahren.....Stage Proof!!!

Good value but the package arrived damaged