Philips Automotive Lighting D3S Authentic Xenon HID Headlight Bulb with 4200K Intense White Light, Fits Select High Beam and Low Beam Positions, 1 Pack

Product: Philips D3S HID‑style replacement bulbs – compatible with 2016 Chevrolet Suburban LTZ Installation: The bulbs fit the factory HID housing without any modifications. I was able to replace both units in roughly an hour using only the standard tools that came with the vehicle. Something I found along the way was that the old bulb came lose and was bouncing around, probably why it died. Performance: Immediate illumination – The bulbs turn on instantly, eliminating the brief “candle‑mode” dimness I experienced with the original HID modules. Brightness & beam quality – Light output is noticeably brighter and the beam remains crisp across the entire interior cabin. The color temperature matches the OEM white tone, giving the exterior a clean, neutral look. Stability – Throughout several days of regular use I observed no flicker, strobing, or error codes on the dashboard. Durability: The units are sealed, so there is no exposure to moisture or dust. I have not needed to service them since installation. Overall impression: Replacing the stock HID bulbs with the Philips D3S HID‑style units provided a straightforward, plug‑and‑play upgrade for my 2016 Suburban LTZ. The installation was simple, the lighting is brighter and more consistent, and the system operates without any warning messages. If you need a reliable replacement that maintains the original HID look, these bulbs are a solid choice.

Perfect fit and light temp to match OEM.

I have two sets of the Philips HID bulbs now. They have a very nice bright white light. It was an upgrade for both cars. The first set has been in a car since August of 2023 and still going strong. Don't buy the odd name brands. That set my wife bought died in 6 months. Philips is a good reliable bt=rand.

I bought an off-brand, a 2-pack for about $35, which was great until one bulb decided to come on only when it wanted to. Took my JGC SRT to the dealer for service and asked them to diagnose whether it's a bad bulb or another issue. Dealer was nice to give me a free diag. Cost from them to replace both bulb was $850 + $250 per bulb. Service manager told me if a new bulb does not fix the issue, then I may need to replace the ballast. WTH!!!!! I decided to save over $1K, buy a known brand - Philips, which I believe is also OEM. O'Reilly's had this same bulb for twice the cost. Folks there are awesome, but I bought two here for the price of one there. Long story short. Both bulbs are working great, but the installation is a major pain! Took me over an hour the first time I installed the driver side bulb and only 15 minutes for the passenger side. This second time the driver's side took me 15 minutes and the passenger side took me an hour. You can YouTube vids on how to replace these headlight bulbs, which can be done, not really hard, but a major pain. Wear cheap silicon gloves to protect your hand. Quick tips: You will need to remove your air filter to get to the driver's side. You'll need to move the ECU over a bit on the passenger side. Very difficult, near impossible to see what you are doing. I used my phone to take a vid of the open bulb compartment to get a "visual". You will have to install by "touch". Removing the bulb was pretty easy. Bottom line, great buy, great value. Good luck on the installation. Grab a beer or two or three. Cheers!

Brightness is not as it says on the listing "Intense White Light" but rather it's more of a yellowed light. Still, I have to blame myself for this buyer's mistake because if you search Google for the measurement of color for light output, you'll see that 4200k is not as "intense of white" as it claims. So a quick Google search would have told me not to believe the intense part of the claim. Oh well. The light on the drivers side (left) is the OEM light which is probably 5000 or 6000k. The one on the right (passenger) is this one. See the difference. I don't like it, but I'm not changing it. I'll leave it in until it burns out as I'm already past the return window. Quoted from Google search results, "Color temperature is a measure in Kelvin that defines the color appearance of the light produced by any source. The range of color temperature goes from warm yellow hues, at low Kelvin values, to cool bluish tones at high values. In vehicle headlighting, the color temperature is more than an aesthetic choice; it is very important in terms of visibility and glare and in general driving safety. Driving at night can make a big difference in your choice of color temperature of the headlights. The warmer light at a lower Kelvin value is easier on the eyes and provides better contrast in bad weather conditions, such as fog, rain, or snow. At a higher Kelvin value, cool light can light up more details when on a clear road but produces glare on wet or reflective surfaces. Understanding color temperature will help in the choice of the right kind of headlight for driving conditions and comfort." We never have ANY precipitation in Phoenix so I don't have to worry about contrast or wet surfaces. I wanted what the car came with, but that's not what this is. It does work, so I have to give it at least 4 stars, but I deducted one because of the *Intense* & *White* wording it erroneously uses. UPDATE: It's been five months since replacing one of the lights on my 2014 Model S. So far the light is still strong & has not flickered its way to being completely off like the old one. I'd been living with that for a whole 2 years, so it was time. I still have that one gripe from before. It's not as white as your old ones from the factory. I've seen on the TMC forums that some people prefer this slightly off-white look to it. Not me. I miss the old OEM factory white straight out of Tesla factories.

2015 JEEP Cherokee Limited. Changed headlight bulb on driver side. STEP 1. Searched and reviewed several YouTube videos for 2015 Jeep Cherokee headlight bulb replacement. Determined that I could do this myself. Tools needed were 8mm socket and small screwdriver. Also checked owner’s manual for type of bulb. STEP 2. Make certain that headlights are turned off. Turned front wheels to the far right to get better access to the fender panel. STEP 3. Removed two 8mm screws from plastic fender panel. Panel was tucked in under plastic molding. Pulled panel back and used bungee cord through the screw holes to hold panel back. STEP 4. Reached in to grasp the plastic cap from the back of the headlight assembly. Twisted counterclockwise and removed. It took a few tries to get it to turn. Cap is held in place by 4 tabs. Get a feel for the way the cap is seated so that you will better understand how the replacement will feel when you put it back. Do not lose the desiccant pack on the inside of the cap. STEP 5. Reached in and twisted the base of the headlight bulb counterclockwise. Pulled it out. Get a feel for the way the bulb is seated so that you will better understand how the replacement will feel when you put the replacement. STEP 6. Used a small screwdriver to pry off the rectangular connector from the base. It was connected to a braided shield. I thought it might have been held in place by some tabs but it was not. Also note the small indent in the connector and the pins to see how it will fit when you put the replacement in. STEP 7. Noted the brand and model of bulb. Ordered replacement from Amazon Prime. Philips 42302C1 D3S Standard Xenon HID Headlight Bulb, 1 Pack $70. When it arrived confirmed that it was original from Phillips. STEP 8. Reversed the procedure as described above. Turned headlights on and it all worked.

I can't speak for durability on a new bulb, but I expect to get several years as I did with the stock Philips bulbs which had one fail in 2023 on a 2016 car that was bought new. They were a match on color to the still functioning bulb as far as I could tell, but did warm up faster. Replaced both and made the old working bulb a spare. The very center of the beam is a slightly warm temperature color, but the overall light appears a brighter white. I hadn't noticed a warm tint to the center of the beam on original bulb, but it was likely the same as it's the same bulb brand and model. The light is quite bright and throws far down the road and lights up the all important roadside. I had some trouble seating the passenger side bulb, but it's obvious when the light pattern doesn't have the sharp cutoff on top. Pretty sure that's just user error as it's hard to get in there, and my first time changing them on this car. Once seated, all was well. Of note, you do need to remove the locking bracket from the old bulb and snap it on the new one as thats what locks the bulb in the lens. These don't have the authenticity code, but did have a process to take a picture of the box to verify through Philips after scanning the QR code.

Problem: headlight burned out. (Cadillac 2015 XTS - passenger side light) Two considerations for replacing the headlight, 1 - take it to the/a dealer and have them replace it, their cost for the light and of course their labor or 2 - buy the light and do it yourself. So, first, I went on you tube videos to see what all is involved to accomplish this job and if I wanted to tackle it myself. (O.K. I'll try it myself) Second, I checked with several auto parts stores to find out the price of a replacement light - the prices ranged from $138.00 to $180.00 just for the light. Bottom line - went on Amazon and bought the bulb I needed - $74.56 and replaced it myself. The product gets 5 stars, very well packaged, exactly what was ordered, and works fine. 4 stars on the easy to install, tight quarters but very doable and no tools necessary.

منتج اصلي جا بي باركود وتم التأكد نفس الموجود في وكالة اودي وبي اقل من ربع السعر

Es cierto que es una marca tradicionalmente líder; pero no tiene por que cargar tan alto el precio. Provocan que compradores opten por otras marcas no tan confiables o de calidad. Este punto lo debería revisar detenidamente con un sentido de responsabilidad y solidaridad social.

You cross your fingers when ordering an expensive light globe from overseas. But this item was packed well and arrived safely. It was installed with no troubles at all. I wouldn't hesitate to reorder, especially with a significant saving over buying it retail.

Works and fits as it should. The mechanic shop was charging me 7500 for one, that also not Philips quality. So I got the original Philips one from here.

Used for 1 month and light getting weaker