SuperATV Scratch Resistant 3-in-1 Flip Windshield for Polaris RZR (See FItment), Can be Closed, Vented Or Fully Open, Made of 1/4" Polycarbonate 250x Stronger than Glass, USA Made

Great windshield. Highly recommend. Nice to have 3 different positions making it very versatile for all needs. Enough adjustment in all the parts to make it all fit just right. Took the advice of others to ratchet strap the roll bar prior to removing bolts (just as a precaution since someone else's roll bar sprung apart and fought getting it back in place to install the new bolts). Didn't see any tension on mine, but worth the 2 minutes to grab a strap just in case.

I liked the venting and being able to fully open windshield.

I found this to be a quality product. Be OK with not finish tightening everything as you go thru the instructions to a allow a little flexibility to adjust for your specific machine. I did have one minor issue with a small gap between the bottom of the main windshield and the top of the short shield that comes in contact with the hood of my Razor. I found a small gap on the left and right sides where the two pieces met. This was due to the main shield coming into contact with the upper windshield mounts on both the left and right sides with created a little spring gap. I added three stainless washers to the two upper hinge bolts on both the left and right sides which solved the issue. Overall, great product. One thing they should add is a quick note on eliminating the static that is introduced when you first remove the protective paper during the installation process. It created a giant dust attractor the for my first ride.

Great fit for 2017 570 RZR. Instructions were easy to follow.

I liked this product. Very sturdy.

Very well made, HUGE plus being able to open and let the air flow ! My friend has a windshield that doesn't open, and it get sooo hot in there, especially at low speeds. Yes, it's rather expensive, but if you're gonna keep your RZR for a long time, dig deep and man up, I believe it's well worth it!INSTALLATION TIPS;1. Do not remove protective film until installation complete, you can pull back or carefully trim away to install.2. If you have factory Polaris doors, the included hardware for lower piece ofwindshield will not work. Save yourself some time and pickup 4ea. 2"x 3/8 bolts. I used stainless, about $13 but will not rust.3. Bolt catch on lower windshield before installing on vehicle, you can adjust later. Not much room between lower and dashboard for big hands.4. THIS IS THE MOST IMPORTANT TIP!!!! BEFORE REMOVING ROLLCAGE BOLTS, SECURE DOWNTUBES WITH A RATCHET TIE DOWN!!!!See attached picture. I did not and one cage downtube popped out of place. I spent about an hour cussing and sweating trying to line it back up and put a bolt in before a lightbulb came on above my head and I grabbed the tie down.

Had a heck of a time getting this thing installed. Come to find out, I got a defective unit. After some back and forth with SuperATV customer support I was sent a replacement and it installed much easier. Kudos to SuperATV for an easy return process and helping me out with installation issues.The versatility of the windshield is great. I love being able to have it closed when it's cold and be able to crack it open when it's hot. I would definitely purchase this again and highly recommend it.

Glad I got one. It’s fantastic