VViViD Micro Bio HEX+ Air-Tint Headlight Taillight Tint Vinyl Roll (17.9" x 60", Clear)

I did not use this for my vehicle, I used it when building the new enclosure I built for my 3D printer. It came out looking really nice and it was so easy to use I’m going to actually use it in my trucks lights next.

First time wrapping anything automotive, and I have less than a handful of newbie DIY mistakes (lifting at corner edges due to not stretching enough). That being said, the clear Bio HEX is subtle but gorgeous. One roll allowed me to do all my rear lights - uppers, lowers, and brake light. Vinyl doesn't impact the visibility of my lights, and because of the lack of tint, I'm not running afoul of any laws. Application was surprisingly simple - repositioning, lifting, and stretching the film was easy and user-friendly. Very little heat needed to manipulate and stretch the film around curves, but you do still need a heat gun. I had no tearing or bubbles, but I did take my time (as you should) to be sure I was getting as good an application as I could for my first go. I can't yet speak for how well it comes off, but will update this once I pull off the film to redo the sections that are lifting (again, 100% user/beginner error). But, even with the lifting, the film has remained intact and nothing has been able to get under it in the couple months I've had it installed. Watching professionals/videos, reading up on the process, having the right tools, and most importantly, having a lot of patience is what's going to get you the best results if you've never worked with automotive vinyl before. Overall point: wonderful product, easy to work with, 10/10 would recommend and use again

I'm in love with this vinyl tint and I'm on a mission to cover everything I can find with it!! I recently purchased a new laptop and one of the first tasks I wanted to take care of was protecting the cover from scratches, dings, dirt and such...I basically don't want it to go the way of a lot of my cell phones.. I couldn't find any covers online, I guess since I have a new model so I went to the YouTube. I watched a video of a guy covering his laptop with this same vinyl tint and once I saw how easy it was and the end result, I knew I had found my laptop cover. I love that applying this vinyl tine doesn't involve using water to mist the surface, it adheres securely upon contact but it also allows you to lift it up and adjust as needed for straightening. Smoothing is done easily and there's no struggle with air bubbles. I used a hairdryer on a lower setting to smooth out the corners. Since I've applied the vinyl, it hasn't started to peel off or ripped, it remains as secure as the day I put in on. This vinyl is durable and of a weighted quality that is easy to work with.

I tried this VViViD headlight tint vinyl, and overall it turned out really nice. The appearance is definitely the highlight. The hex pattern gives it a unique look, especially in the light. It’s subtle but still stands out. The tint level is lighter than expected, so don’t expect a super dark look. It’s more of a mild tint with a visual effect rather than full blackout. The texture feels good. It has a smooth finish with a bit of grip, which actually makes it easier to handle during installation. The stretchability is solid. With a little heat, it stretches well around curves without tearing, which helps a lot on headlights. The application process is pretty easy. You can lift and reposition it if needed, and the air release helps prevent bubbles. The adhesion is decent, though you’ll want to take your time and make sure edges are sealed properly to avoid lifting later. The durability seems okay so far. It holds up well with proper installation, but like most vinyl, it depends on how well it’s applied. You get enough material in the roll to do multiple lights or even other small projects. For the price, the value for money is very good, especially for how it looks once installed. Overall, this is a nice vinyl wrap option that’s beginner-friendly and gives a clean custom look.

I love the loom of this headlight tint. I have it on my mercedes c300 and am about to by more and do another car. it works well and came in good packaging. it is air relea and didn't crease and has good stretch with heat. has top liner to protect it. most make the mistake of complaining about instal but you have to take that top clear plastic off of the product before smoothing out. Start with peeling back half of the bottom layer to get to the tac and place on main surface then pull and get the main surface glassed, then peel other half back and stick to the whole headlight, then work section bu section to bend and pull to get out the wrinkles and heat a little to stretch. don't over stretch, then squeegeeout the lines and any air and post heat so it doesn't shrink and to seal it down and your done.

Ive bought a few headlight films in the past and this is second ONLY to Hella's precut thick films. Went with the yellow to help tint some bright LED fogs. Not a lot of color shift unfortunately, and you cant really see the pattern unless youre up close. but it went on easy, trimmed easy and the quantity for the price was very reasonable. Would definitely buy again. I did not need to use a heat gun, so I cant speak to having to heat it up.

Looks great and easy to work with but easily scratches during application and can be seen when light reflects. Also, does not stick on 1/4 round edges. Would not purchase again.

I use this for various projects and it's very easy to install, durable and easy to remove if necessary. Bought several times in several styles and will again. It's great for making skins for my gadgets as it's a very pleasant texture, smooth but grippy and feels really nice tactily.

This is not the first time I have bought this wrapping it does a good job of protecting the car

This VViViD headlight vinyl is good quality and the finish looks really nice once installed. The material feels durable and gives a clean, tinted look to the headlights. Application takes some patience though, especially around curves, so it’s not the easiest for beginners. Once it’s on properly, it holds well and looks professional. Overall, great product if you take your time during installation and want a clean custom look.

Muy bueno 100% recomendado

En este tipo de paquetes considero que también debe etiquetarlos como frágil, porque el rollo se aplasta y el materia se daña.

Great product, easy to use and brilliant shine.