Question 1

Is this strong enough to "push back" toward the exterior of the wall? ie, is it better than the products where you drill behind the crack?

Accepted Answer

Ben - I am not an expert by any means - but I can tell you my experience.  This is a low pressure product - meaning that the "pressure" comes from VERY slow use of a caulk gun.  That being said - this is an expanding foam type of product - it goes in as a very thin liquid and once activated foams and flls the crack - even hair line ones.   The directions say that as long as you are below grade you do not have to seal the outside - well apparently the very top of our crack was above grade - when I went outside I could see the product had foamed to the outside.  This means it went from a small hailine crack - through the wall  - all the way to the exterior wall.  I used this product to fill two areas with cracks  that had leaked for a long time.  It's been a few months now - and lots of rain - and we are still very dry.  No drilling was required.  I hope this helps.

Question 2

Can u use this product will water actively coming out of the wall or does it need to be dry? Once the solution is applied. do u need to wet the wa

Accepted Answer

Foundation cracks cannot be repair while actively leaking. The surface sealer and port adhesive requires a dry surface to properly cure and adhere. The injection foam can be used when the crack is wet. In fact, part if the injection process includes injecting water to assist in the foam expansion.

Question 3

What is the size of the port adhesive containers? eg ounces

Accepted Answer

Each jar is 8-ounces or .25 quarts.

Question 4

Have several cracks, some are substantial size, how much surface area does this kit cover?

Accepted Answer

ONE (1) RadonSeal® DIY Crack Injection Kit roughly fills 8-10 linear feet of cracks in poured concrete walls, from hairline to 1/2" wide. If there is a large void behind the wall or the urethane wastefully runs down towards the footings, it can consume more polyurethane foam, typically in the lowest injection port. You can order additional cartridges by calling RadonSeal®. Twenty-foot kits are available on Amazon®.

ASIN	B006OP30L6
Best Sellers Rank	#22,219 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #110 in Wall Surface Repair Products
Brand Name	RadonSeal
Color	Grey
Customer Reviews	4.5 4.5 out of 5 stars (1,171)
Included Components	repair kit
Item Form	Foam
Liquid Volume	22 fluid ounces
Manufacturer	Novion
Material Type	2-Part Expanding Urethane Foam
Maximum Gap Fill	0.5 inches
Model	301
Number of Items	1
Number of Packs	1
Part Number	301
Surface Recommendation	Poured Concrete Walls
Tensile Strength	180 psi
UPC	856255006058
Unit Count	1 Count
Water Resistance Level	Waterproof

RadonSeal Complete DIY Foundation Crack Repair Kit, Urethane Sealant, 10 Ft | Low-Viscosity Urethane Injection for Crawl Spaces & Concrete Basement Walls, Stops Water Leaks & Radon Gas, Drill-Free

Details

Details

Description

Specifications

Common Questions