AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4" Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

Arrived on time packaged very well

This pump is identical to my original pump. It was very easy to install and after running it for about 15 minutes, I was very pleased with the amount of pressure that the pump produced.

Mounted right up and worked fantastic. Pressure was slightly higher than the original. Nice replacement part.

I bought this to replace a AAA Pressure Washer Pump 8.7GA12 that came on my Simpson Aluminum ALH3225 Pressure washer.Install was super easy, four bolts off, four bolts back on. Works fine.I hope Simpson is reading as my original pump was/is still under warrantee and I was approved for a replacement back in October of 2020, it is June of 2021 and it is still not in. No amount of calling customer service helps because , well, it's not there fault or problem. All warrantee is handled by a third party.Remember that the next time you want to buy anything made by Simpson.

It was nearly six months after I purchased this before I got around to changing it out. My Simpson Power Washer was new and I had used it only one time in fall. I tried to clear out the water in the pump when I was done and put it away, but I did not use the antifreeze kit that is small pressure can and that cost me the pump. The next time I went to use it, the winter cold had frozen remaining water in the pump and that made it totally ineffective and lost all pressure.I was pleased to find this and ordered it. The repair shop wanted close to $250 to examine the unit and I had to drive an hour just to drop it off so this replacement part was a much more desireable option. I didn't know what to expect until I replaced it. It took me less than 10 minutes to put the new pump on. Four bolts and the original slid off the keyed shaft, I then slid the new pump on the shaft with attention to aligning it to the key and tightened up the bolts and done! Totally repaired and very happy with this part and ease of repair.

Pretty Easy to replace was exact fit on Simpson 3200 with Honda GX200 engine.The brass had cracked on my old one from improper winter storage. That piece alone was 80% of entire new unit so went all new. Highly recommend using a pressure washer winterize spray to prevent in future. Hoping for a long life out of this one now that I know proper way to store it.

This was so easy to install on my pressure washer- especially with the short how to video. Save yourself a ton of repair up charges and do it yourself- even a novice, like myself, could handle this. It too me a little longer than the video because my original pump was rusted onto the shaft- but I saved $300 doing it myself vs taking it to my small engine repair guy.

just what i needed to get back to work! Good price, fast delivery & just right!