MOOG K3171 Suspension Stabilizer Bar Bushing Kit for Jeep Wrangler

Quick, good quality, recommended.

I purchased these for my 97 jeep grand Cherokee as my mechanic was going to be replacing my front suspension. The bushings fit great and worked as advertised.

Great they fit well 96 Cherokee XJ easy installation.

I put these on my old Jeep XJ that I use on a rural route in NC...and it really improved the ride.I don't think that I realized what a crummy ride I was experiencing with the old bushings until I put these on.Not a bad job to do on the 96 either...not as much rust as on the 2000 that I retired when I busted the leaf spring and the axle came up hard and broke the frame.These cheap (inexpensive) parts make a big difference...and if you can do the work yourself, you'll make a big difference in how your vehicle rides for a small investment.Stuff wears out...especially if you drive on rough gravel roads all day...so if you are experiencing a rough ride or hearing a lot of clunking up front, check these bushings.They could be the problem.Moog makes good bushings.

Bought these for my 99 Jeep Cherokee (NOT A GRAND) with 1 inch swaybar, they work perfect. Installation was a breeze except for the last bolt broke off the weld "nut" inside of the uniframe when I was tightening it. I used an angle grinder with a cutoff wheel and cut off the head of the bolt. Then fished in a new bolt through the access hole on the uniframe along with a socket and a piece of steel I cut to fit the socket to keep the bolt from spinning. (the access hole is only about 1.5 in. diameter so I couldn't get a ratchet in there). Threw a washer and nut on the other side and everything was good to go.Installation tip, make sure vehicle is parked on a level surface when you do the install. PB blaster in advance would have also probably helped my situation.I highly suggest this product.

Nice and snug fit for 90 cherokee xj

Perfect fit jeep zj.

My stock bushings were old and crumbly. Great swap and well they are blue too so there's that!