SCRIB3D P1 3D Printing Pen with Display - Includes 3D Pen, 3 Starter Colors of PLA Filament, Stencil Book + Project Guide, and Power adapter

This is probably going to be the most in-depth review I have ever wrote on Amazon. I am doing this because I feel like it is important for when you are shopping for 3D pens. This will cover the PLA that the pen comes with, and also PLA I bought elsewhere and why I have chosen what I have. ------------------- My first impressions: I am surprised at how light the pen is. I have small-ish hands for a 5'1" woman and it felt very comfortable to hold. After reading the instructions, it states that if the PLA crackles or bubbles while the using the pen, to lower the temp. Sure, no problem right? Not really. I use wax paper to trace my designs on, I use this due to a youtube video which suggested it, and its a lot cheaper than the mats. I also prefer it over mats because it is paper thin, which gives me the most accuracy of my tracing which is important to me. I started using the pen at the default 190f. As I was using it, I noticed that the PLA did crackle in the pen, and it did form bubbles. As advised by the instructions I turned it down lower. The lowest point for PLA is 160f according to the instructions, however, it would not stick to the wax paper at all. I then tried 170f and again, the PLA would not stick to the wax paper as well as it had with the 190f. Once more I turned it up to 180f, it stuck, not as well as I would like but it was a lot better than the other settings. Also, at the lower settings it gives no time at all to adjust the plastic if you need to nudge or squish down a bump. Changing the PLA: After using most of the PLA given in the kit, I went out and bought from a local small buisiness (SUPPORT THEM!) which uses locally sourced PLA. Once more, I tried the 190f temp setting. Not only does the PLA come out much smoother, it sticks to the wax paper perfectly, and I am noticing my pen does not get near as hot using it. I can use it for much longer before deciding to give it a break. This means I can nudge the PLA, and bend it and it sticks well to my wax paper so it does not shift on me while working. I also notice that it is much less stringy than the PLA the pen comes with. PLA brand matters, and it is good to research into a good PLA, I am just glad our local PLA works this nicely. TIPS: Bonus, a tip to enjoy your pen even more. You can get a lot more use out of your pen with various other tools. A wood burner with temp control and multi tips is wonderful for shaping and smoothing your project after you had made it. Use aluminum foil covered in painter's tape to fill in big gaps to use less PLA. A course sand-paper followed by a smoothing sand paper also helps in finishing off the nice smoothness of the PLA. As stated before, Wax Paper is a wonderful material to work on. It could be used repeatedly until it eventually tears and painter's tape peels off it nice so you can adjust and move it. Look for some good youtube videos to get you started on techniques to best build your 3D Pen creations! Overall: This is a very nice pen for its cost, you can adjust the temp, its light and comfortable, also easy to use. Pictures provided show the projects I have made with this pen for my D&D sessions. The PLA that I bought works wonderful for being painted right on without any primer. If you are curious, I use 3D Fuel PLA. Someone suggested not to work it too hard, giving it a break every 30min or so, I think some times I do go closer to an hour. Always press the up button and get your PLA fully out before you turn it off (by unplugging it). Always trim the tail off the PLA. I have yet to run into any of the issues of it clogging or just turning off. Only twice did it seem to "turn off" and I think my PLA had nudged the cord since it curls, because it would auto go back to temp after.

This was fun for my 12 year old. The quality is good and durable. It’s easy to read and follow directions

As an entry into the world of 3D extrusion, the SCRIB3D P1 is a solid, user-friendly tool that manages to avoid many of the common "clogging" issues found in cheaper models. The inclusion of an LCD display is a major plus, as it allows for precise temperature adjustments depending on the type of filament you’re using. Performance & Usability: The feed mechanism is surprisingly smooth. I tested it with the included PLA starter colors and found that the flow rate is consistent, which is crucial when you're trying to build upward or follow a complex stencil. The ergonomic design fits comfortably in the hand, and the buttons are positioned well enough that you don't accidentally change the speed mid-stroke. What’s in the Box: The kit is very comprehensive for a beginner. Having the stencil book and project guide included means you can start creating immediately rather than just "doodling" aimlessly. The power adapter feels high-quality and the cord length provides enough slack to move around your workspace freely. Why it’s a 4-star and not a 5: While the pen performs beautifully once it’s heated up, the initial warm-up time is a bit slower than some professional-grade units. Additionally, the fan can be a little loud during extended use. It’s a fantastic hobbyist tool, but if you're looking to do high-volume architectural modeling, you might eventually want something with a faster extrusion top speed. Final Verdict: For students, hobbyists, or anyone looking to add a 3D element to their art, this is an excellent value. It’s reliable, easy to calibrate, and provides a great introduction to the tech without a massive learning curve.

Sturdy, easy to use, great for all ages (parent supervision for kids). Great for art projects and expressing creativity. Great gift as well.

My 9 year old has LOVED this thing. It entertains her for HOURS when nothing else can. She has made all sorts of random things and has spent a lot of time learning how to use it better by watching videos and getting tips. When it broke, we were able to get another, no issue. Its fun and a great quiet activity. I hate the plastic aspect of this but I do appreciate the entertainment value.

I bought this 3D pen for my daughter because she loves arts and crafts, and the price seemed very reasonable. Before ordering, I did notice that several reviews mentioned the pen not working out of the box, but I decided to take my chances because most people still seemed happy with it. Unfortunately, the first one I received clearly had a defect. It wouldn’t start working no matter what I tried, and part of the charger was missing from the box. I ended up returning it the same day and ordering the exact same one again. The second pen worked perfectly, and once we got a working one it’s actually a lot of fun. My daughter really enjoys using it, and we even ordered a 3D activity book to get more ideas for projects. It’s a creative toy and great for kids who like drawing and building things. That said, I had to go through the hassle of returning the first one, and judging by other reviews it seems like some units just don’t work. Because of that inconsistency, I can’t give it a higher rating. If you get a good one, it’s great. Just be aware that you might have to exchange it if you get a defective unit.

I got it for my niece and she loved it. It’s easy to use and very fun.

Got this to make features for miniature scenes. It's very neat but I think it has a high learning curve to make things that don't look so bloopy. Smells a bit, but that's expected since its melting plastic lol

Good quality for money. My kids love it. And they made many things. The only issue I faced is that it didn't work once I got it out of the box. I had to open the pen using a screwdriver. The pushbutton was a little bit displaced. I had to readjust it. Not everyone can do the same. But it worked for me.

Amazing for creative kids

Excelente lápiz de 3D

Molto carina e ben fatta. Mia figlia ci si diverte molto è anche veramente semplice da usare consigliata

Acheter pour mon fils de 10ans qui adore dessiné il est très content de son stylo. Facile d'utilisation bonne prise en main chauffe rapidement. Les recharges sont un peu cher mais on peut les trouvé sur un autre site Al...Ex... beaucoup moins cher. Très content de lui avoir offert il plaira à tous du plus petit au plus grand !