FIRSTINFO A18569US Windstorm (2X Flow) Air Blow Gun

Amazing little piece of simple tech that works great! The Venturi effect is painfully loud but it sure puts out some air. The little adjuster does a great job and is located so you can operate it while adjusting with one hand. Hopefully this one will last for years but if it doesn’t I will replace it with one just like it.

Everyone needs a blow gun. They're great. I use mine for everything from dusting my computer, to drying crevices on my vehicles, to cleaning out my my garage. This one is exceptional and I highly recommend it. The design (pulling air in from behind the nozzle) works incredibly well. It really does amplify its blowing ability. This blowgun, purely due to the CFM it can expel, is air hungry. I get less than 10 seconds of intermittent blowing at 150 psi using a 6 gallon 5 CFM compressor. This is to be expected, you can't beat physics. I've had it on my 80 gallon 70~ CFM shop compressor, it's a much better fit on that unit. Regardless of your compressor capacity, I highly recommend this blowgun. It's *almost* magically good.

This is a heavy-duty professional-grade blow gun. Love it. The variable speed is great. There is a blue dial/knob on the back of it and it is also very sensitive to how hard you pull the trigger (so super easy to control air flow). SO much better than the el cheapo blow guns you get everywhere else. It does make a jet turbine sound due to the blue nozzle which seems to employ a venturi effect to increase the air flow. You can remove that (it's a standard blow-gun thread size) and put whatever tip you want on it, but I like it as is. It's really nice to be able to lower the air level enough to just blow dust off my table saw without also filling the air with a dust cloud.

I was in the market for a hi-volume blow gun, so naturally I jumped on Amazon and started looking around. There are a handful of different types of hi-flow blow guns out there that had pretty much the same CFM specs and price. The only major differences between them were they way they looked...and I'll admit, I purchased this one just because it looked cooler than the others. You never see it in the movies, but underneath all that hair, Chewbacca has a pistol that looks just like this as back up to his laser-crossbow-rifle. I don't have other hi-flow blow guns to compare this one to, but it really moves a lot of air. It operates just like all the others do, it draws in air thru holes in the nozzle to generate more volume. That volume also comes with more sound, too. It's pretty loud. The specs say it's 100dB. Huh? I said it's loud! What? I SAID IT'S LOUD!! I CAN'T HEAR YOU!! Never mind... The specs also say that air inlet on it is 1/4" PT which I assumed to mean "pipe thread", but they are not your typical pipe threads (they're certainly not NPT). This was a little disappointing because I was going to put a high-flow air plug on it and wasn't able to. I deducted 1 star because of this. It appears to be normal threads and the air plug has an O-ring to seal it. You can fit the air plug to the top of the gun if you're using this in an environment where you may have the gun hanging from the ceiling which is a nice feature. It does have an adjuster to control the amount of air this thing releases, but it's kind of fidgety. It does work, but small adjustments turn into large changes in air volume. Also, it doesn't go from 0 to 10 (like a volume dial) with stops at both ends. The dial will spin and spin and the air volume changes from low to high to low to high to low to high to low to high.....you get the picture. When the tool arrived, the manufacturer had included some ads for other tools they offer, and they offer this tool with different attachments. The blue nozzle on the end screws off and you can attach other things to it (like long blow nozzles, short nozzles, etc.). It's cool to see that this tool can be a "regular" blow gun and a hi-flow gun, but was a little disappointing their listing on Amazon makes no reference to this feature. I'm not deducting a star for that--I'm more upset at myself than anything because normally my Amazon-shopping-ninja skills would have found that out before I purchased it. Overall, I'm very happy with this purchase.

Blow the dust right out no issue

Very good volume of air, a bit noisy but expected with this type of nozzle. Very well made and sturdy.

I have this blow gun hooked up to my 10Hp 35 cfm compressor. It is a marvel. The jet of air it puts out is focused in about an 8 inch diameter by 6 feet long cylinder. At max psi, you could seriously injure someone with this thing. It functions like a blower should function. Handle pressure is very light, the unit is well made with a cast body and nice anodized aluminum nozzle and flow adjustment. Rubber type coating on the handle keeps your hand from getting cold. The nozzle screws into the body with a fine thread and o-ring. The one weak link is the plastice pull handle. Could easily break if snagged and pulled. I tried it with unfiltered raw air at 175psi (I know overload) holding my hand 18 inches away, caused pain from micro particles, almost a sandblast. A metal handle and made in Germany or America or Japan and I would pay $59 for this fine tool.

The one i received was probably bad. It worked really well on low abs very good at high. There was no in between with the adjustability. Regardless of the position, it was either low speed or full blast. It’s very loud, but i don’t have anything else to compare it to. The body n nozzle are very well made but the trigger handle was extremely thin and i think very flimsy. I was afraid to drop it Because it looks like it will break easily. Not bad for 17 bucks but like the saying goes, you get what you paid for.

Great gun for blowing out the filter in my ash Vax and the household hoovering.It arrived only this morning and might i say it was before the expected time so I've had little time using it but so far it's very good noise factor not as bad as I was expecting from comments i read before buying overall very pleased

Hace mucho ruido y se termina el aire de mi compresor demasiado rápido

Nice air gun, it’s well made with good materials and works really well. The air flow adjuster is smooth and easy to use, the air induction tip really increases airflow volume, and the trigger is robust and ergonomic. I like this product, I use it to air dry aluminum cnc parts, but will get more for each mill to clear chips and coolant.

Works good but is a loud blow gun. Should wear hearing protection

very good product