Question 1

The box says it requires a 100 lb tank. I was hoping to use a 40 lb tank. Why is 100 lbs required and can I use only a 40 lbs tank?

Accepted Answer

I just did extensive research as to WHY a 100lb tank is necessary and here is why:  The pressure in a 10lb vs a 100lb vs a 250lb tank is all the same, HOWEVER, propane is stored in those tanks as a liquid, this liquid has a boiling point of -43.6 degree F (-42 Celsius).    To simplify it: a larger tank can VAPORIZE liquid propane FASTER because it has more surface area to transfer heat through as well as a larger volume of liquid to evaporate.     If you google "propane vaporization rate chart" then you will find that there is a relationship between the volume of gas, the temperature outside, and the size of the container (Tank) that holds the liquid propane.

a 40lb propane tank would work if the temp is at least 40 degrees F outside and the tank is at least 25% full, then you would be able to meet the vaporization demand to produce 30,000BTU/hr that this unit is capable of.   But with the 100lb container, it can be a little less than 10 degrees F outside and only 10% full and it will still produce well above the demand for this unit.

A possible solution might be: operate the unit below max capacity (medium or low setting) and you will not exceed the vaporization limit, but then... why not just purchase the smaller unit that produces 18,000BTU/hr instead?  But even that one is suggested to operate with a 100lb propane tank as well.   All that I have said can be found on the internet, simply google "Propane installation regulations"

I hope this helps!

Question 2

Box says 18,000 BTU and 30,000 BTU? Which is it?

Accepted Answer

The one I ordered and just received 30,000 BTU infrared, propane.  Just verify that you want propane/gas or electric, infrared or blue flame.  I haven't had a chance yet to remove from box, and when purchasing I did read in the comments it was 5 plates but if you look closely at the above picture there are double that.  Same picture on my box.

Question 3

I had to run about 30 feet of black pipe to connect my heater to the propane. . Do i have to blead the line each time i change tanks?

Accepted Answer

You can use an auto switching regulator with two tanks to avoid the need to bleed the line each time.  Just don’t let both tanks go empty at the same time and you’ll be fine.  Here’s an example of what I’m talking about: Camco Propane Double-Stage Auto-Changeover Regulator- For RVs with Dual Propane Tank Hookups, Maintains a Constant Gas Pressure With Auto Change From Empty to Full Tanks (59005) https://www.amazon.com/dp/B0024ECBCA/ref=cm_sw_r_cp_api_i_FbBiCbY38EQNK

Question 4

Whats the attitude of this unit or does it what one?

Accepted Answer

This heater is tested up to 5,000 feet above sea level. We have had customers with success up to 8,000 feet, but we cannot comment on the performance or efficiency past 5,000 feet. - GHP Group Customer Support

Heating Coverage	1000 sq ft
Heating Element	Radiant
Heat Output	30000 British Thermal Units
Fuel Type	Natural Gas
Heating Method	radiant_&_infrared
Recommended Uses For Product	Garage, Home
Mounting Type	Wall Mount
Room Type	Bedroom, Home Office, Study Room
Additional Features	Noiseless
Indoor Outdoor Usage	Indoor
Power Source	natural_gas
Item Weight	25 Pounds
Color	Red

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

Dyna-GloIR30NMDG-1 30,000 BTU Natural Gas Infrared Wall Heater

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions