SHINELINELED Strip 4 Pin Connector 10PCS, 10mm Gapless Adapter for RGB SMD 5050 RGB Multicolor LED Strip Lights 12V-24V Include 5X Line Connectors, 3X L Shape Connectors, 2X T Shape Connectors

The media could not be loaded. This is the best RGB LED strip light I've ever bought. The ambiance it give the room is out of this world. The adhesive at the back of the strip can stick on anything. I bought the 30M length and it covers a whole lot of areas. Even when you cut and joins it, the light still synchronizes unlike someother products you need to be extra careful with when installing it. I will recommend this product to anyone anytime anyday. It's worth every nickle I spent, great value for the money. Keep it up COOLAPA.

This review is basically product assembly information as the instructions are rubbish!These will work with the Govee LED strip lights.To correctly connect the lights, the copper contacts on the cut end of the strips PUSH UNDER the metal contacts in the connector. See photo.You DO need to line up + to +.Try and slide the end of the LED strip into the connectors, as there's a little lip to help the strip lay flat. In the pic, you can see the light strip isn't slotted properly, but the other side is!We kept trying to just clamp the strip lights onto the connector contacts. Needless to say, the lights didn't work!We saw just one review which told us the trick with these connectors.Hope others will find this useful.

From what i can see,these are.desogned to help fitting around corners,connecting into a different direction and saves bending strip lights in tight corners which could break the copper connections. They blend in with the strip light colour too.

I ordered these for my husband along with some strip lighting and upon installing he found the 2 way corner connectors don't match up properly and as such the green doesn't work. The 3 way connectors are fine but for the way it's installed it's the two ways that need to be used need this rectified really as product is clearly mismanufactured if someone can contact me that would be ideal thanks.

Great addition to buy with any LED light purchase. then connectors are really sticky and simple to use. Allowed me to quickly and fully adapt the separately purchased LED lights to the room their were being installed.

Didn't need them as just folded lights over when I came to corners.

I bought these to use with my LED strip light.I looked at questions previously asked and saw the seller say they worked with Govee 4 pin lights. I even looked at you tube to see if connectors were easy to use.I have followed the instructions on the bag which was very limited and a review that said to ensure the pins go under the connectors and peels back the rubber layer too.It is impossible to get the connectors under the pins without first slightly lifting them. It is impossible to slide the lights n as the gap allowed hits the connectors and if you then manage to wiggle and squeeze it all in the connector won’t close. So I’m now left with a bag of useless connectors and segments of not so cheap strip lights that look like I’ve chewed the ends off.

Works great, clips are nice and tight, very easy to use. unfortunately the way that they have designed the T part means that the polarity flips over the straight part of the junction. this means that you have to flip your led strip in order to accommodate this (not always possible if you are using this on an existing led setup). The circuit is double sided so I am not sure for the reason for this design choice as it would be easy to design a piece that doesn't do this on a double sided circuit.