Spigen Rugged Armor Designed for Jabra Elite 75t Case - Matte Black

This is the nicest case available for the Jabra Elite 75t, which is kind of surprising to me. All of the other cases available for these headphone at this time are plain silicone cases which have the extra flap of silicone to connect the top to the bottom piece. This case doesn't have that flap because it uses adhesive tape to hold the top piece to the lid of the headphone case.The item description says it won't work with the Active 75t, not because the size is different, but because of the additional waterproof coating that they put on the case. It is a silicone type coating and adhesive tape won't stick to it. I tried using a hot glue gun but that didn't stick either. What ended up working is putting a small piece of GOOD packing tape (not the cheap kind that barely works on boxes) on the Jabra case lid and then you can use either adhesive tape or hot glue. I used hot glue and it is holding great. It will probably come off with no problems when I put a little effort into getting it off, but it won't fall off on it's own. I take this case in and out of my back pants pocket 20+ times a day and the lid hasn't fallen off at all.(I used Duck Heavy Duty Packing Tape.)

What more can I say that that isn't said in the name. Its literally armor to keep your Jabra case nice and unscathed.This little case for your case is great, and worth the money. My line of work has me going through different terrains and in and out of tight spaces where you would expect to have any tools or keys dangling off your belt to get caught on something, scratched or beaten up. Needless to say this case has been scuffed up pretty good but its still intact and in one sturdy piece, even the carabiner included has been durable and has held a strong spring when getting it on and off the belt loop. No need to buy anything else until or if this one ever breaks.Also, I have read a couple reviews regarding adhesion of the top part of the case before pulling the trigger. I have had no issues, just popped everything on and has stayed on since.

First, the good points are that the fit and toughness of this cover is very good. The case for my Jabra Elite 75t module snuggly and has taken some hits at the gym and at work. The major flaw in the design comes not from the durability but the adhesive strips that are needed to keep the cover attached. The top adhesion especially is suspect; however, one small square of duct tape placed on the lid of the charging case and a small dot of loctite on top of before putting on lid protection took care of the issue. I wouldn’t put the loctite directly on your charging case but a very small piece of duct tape will protect it from your super glue while still allowing a strong connection with the case.

I wish they can make this on other colors.Tips for future buyers:> Prior to initial application, wiping your Jabra case with alcohol pad is recommended to remove oily residual from skin contact. Let it air dry.> Insert bottom case first and then remove the plastic cover on the adhesive for the top cover. Insert on top of the case while applying pressure for at least over 30 seconds.

The case feels really solid and is well constructed. It is definitely a major improvement of the light silicone case I previously had except for one key problem. The adhesive that keeps the top on is terrible. It comes with two strips so you get two tries. I was very careful to follow instructions for the first attempt and it lasted a few days before it came off. I just figured I had failed to properly secure it and it was my fault. I tried again with the second strip and this time was SUPER careful not to make an error. Two days later it still came unstuck. I wish I hadn't purchased this product and would probably hesitate to buy from this manufacture again. I would reach out to them for more strips as they are a specialty size, however I am sure I would get the same result.

I really like this case! This case is definitely better than my other silicone one. The silicone one just attracts dust like crazy, which this one does not. Only issue is that the double-sided sticker on the top does not stick well as mentioned by others. The issue is that the top of the Jabra case is concave and the Spigen isn't formed for it. I used the blue film as the template and cut 3 pieces of double-sided permanent tape to fit that concave space and it sticks firmly to the Jabra. I would recommend the case, just have to do some minor customization.

I was actually looking for a charging case and picked this because I've purchased other Spigen products for years and was impressed. Just a "protection" for a case that's already sufficiently protecting my buds. As with other reviews, the top simply does not stick, no way, no how. DO NOT RECOMMEND

This product is exactly what is needed for my jabras. Other brands can’t open all the way because it’s a one piece product so the part in the back that connects both bottom and top hits and causes the case not to fully open and very tight to get fingers in and take earbuds out. BUT these are two separate pieces so they hit the nail on the head. Because it’s two separate pieces it allows you to fully open the headphone case and have more then Enough space to take the ear buds out. Excellent product and very nice durable case

Lid does pop off if not taped properly.

Although a little expensive and a previous review stating that it wouldn't fit my Jabra Elite Active 75t, I gambled and of course it fits perfectly. I added extra double sided tape because the lid is slightly concave. Looks far better than my previous ebay silicon cover...👍🏽

BE WARNED get extra double sided tape to put on the inside of the lid before applying it to your Jabra case. The adhesive they have sucks, i was walking to the bus stop and the Spigen lid fell off even though i used BOTH adhesives to try and keep it on. I only realized that the lid fell off when i was already on the bus.The issue is that the top of the Jabra case is concave so the adhesive has a hard time fully contacting this area. GET YOUR OWN THICKER ADHESIVE .Other then this extremely frustrating issue. The build quality is literally the best you could ask for and the style is great. Just fix that one thing....

J'ai acheté cette protection pour des écouteurs jabra elite active 75t et malgré le fait qu'elle était marqué non compatible elle rentre parfaitement.J'ai d'office remplacé le petit scotch préinstallé qui n'était pas de grande qualité par un scotch double face et ça tient parfaitement

Fits perfectly. Love that it has a Caribaner to secure it to a bag or pant loops. Many complained about the lid piece falling off because the top of the charging case is concave. Problem solved! Use the second piece of double sided tape to ensure that it doesn't. Cut the second piece of double sided tape lengthwise and put one piece on the lid lip in the front and another piece on the back. Will never fall off!