Hyber&Cara Clear Flexible PVC Tubing Food Grade 8mm ID x 11mm OD Water Air Pipe Hose 5 Metres with 2 Hose Clamps

Just the item I needed for the job I had

I bought this as the wall of the pipe is 1.5mm thick, it arrived, coiled up of course, but crucially no kinks or squashed flat sections. In order to get it straight, I placed it in a bucket and poured in hot water, let it soak for a minute and then laid it out straight on the floor. I've used the pipe to drain the condensate from my central heating boiler, the pipe has retained its shape because of the 1.5mm thick walls, and has proved to be resistant to kinking, just what I needed and perfect for this type of application.

Mine became Whitened when used to pump Citric Acid (100g) and Sodium Bicarbonate (60g), both food grade, dissolved in 1L of distilled waste, for rust removal. It didn't leak, however this casts doubt on it really being food/water grade tubing, because there should have been no such reaction with a solution like this.

Got this water pipe to make a water level four, a greenhouse making project on a slope after checking up YouTube videos on the process. It worked perfectly and is the right diameter to put coloured water into. It’s not possible to find a 4 m long spirit level so this is much better and also much cheaper, and you can choose the length of pipe you want to level up whatever amount of ground you are covering. Highly recommend this for such things plus also use for water features after project completed :-)

Great breather pipe replacement for my motor cycle

Who is for my water feature that I’m building works a treat

Not much to say, it's flexible, it's soft, it's plastic and it lets fluids through the hole in the middle. Just the thing I wanted.!

If your LG or Samsung fridge has sprung a leak near the door for the water dispenser then use this if the pipe is the 5/16 size There are 2 type of water hose used on Fridges. One for the filter (white hose) which is smaller than this I think its 4mm. And then 5/16 which is nearly 8mm diameter. Just cut a good lump off this hose and cut where the old pipe is leaking. Then thread new pipe over the old pipe as much as you can slide into the old hose about 6 inch or more if you can, and do the other side. That fixed mine. didn't use any mastic or glue as its a good tight fit.