SHURFLO 4008-101-A65 New 3.0 GPM RV Water Pump Revolution, 12V

Replaced this Shurflo with the original Shurflo that came with the RV. That pump had lived a long life (17 years) and finally up and had enough. Replacing Shurflo with Shurflo was easy as the old plumbing connections fit perfectly. I'd read reviews about not having the connectors as part of the sale package, so wasn't worried. Pump installed easy, pretty much same size as old one. Wiring was easy. It self primed and pumped fine with good pressure. Runs very quiet. I did have problems with pump running continuously and not cycling off. Researched that, was ready to adjust the pressure switch, but when I tried it this morning, it had self corrected. I think you have to let the pump run for several minutes to get to the right pressure to cycle off. Works fine now. Happy with the product now; only time will tell how long it lasts.

Pretty quiet and pumps good. Self priming pump. Installed in our 35ft fifth wheel.

Perfect replacement, ready to work right out of the box, this pump has been around at least 25 yrs in all types of RV's so it's a proven pump but a bit temperamental and seems to break at the worst time but since the mfg. has kept it in their product line all these years you can also rebuild the old one and have a spare

straight forward swap, perfect fit, quiet, replacingpump made in 2013, shuts off as expected, flow is great, sureflo quality

Easy to install and it works just fine.

This is a basic RV water pump; 12V, 7.5A, 3GPM,55 PSI automatic cutoff switch. Wiring is simple - red positive, black negative (ground). There are one water intake and one output. The pump requires an input strainer to remove particulates, and uses threaded connections that convert to barb-type connections for flexible 1/2" water tubing. I bought the unit to replace one of the same model that failed after 12 years of use when the steel machine screws connecting the pump body to the aluminum motor housing stripped out the threaded receiving holes in the motor housing. Steel screws will do that in aluminum, especially in high vibration environments like an RV on lousy back-country roads. I was astonished that the previous unit lasted as long as it did under my use - some of the worst Forest Service and BLM "roads" of Colorado, New Mexico, and Wyoming. So I was fine with using the same model as a replacement. Although I can recommend this pump, I give it only 4 stars due to the design flaw of using steel machine screws to attach the pump to the aluminum motor housing. And I'll remember to check those screws periodically from now on.

This was a direct replacement for the same model pump that quit working. It is easy to install (as long as you can easily get to the location where the pump goes). Depending on how the old pump was wired you may need to add connectors to the ends of the pump wires to match existing wiring. It self primes and was up and running in no time. It has an internal pressure switch so it cuts off automatically. It is identical to the original pump and works great.

Direct replacement for my 2006 Winnebago journey. Changed out the pump in 8 minutes. Wifey is happy to have water flowing again.